This article presents a novel design procedure leading to fabrication of a composite adaptive panel prototype with an embedded array of linear shape memory alloy actuators. This procedure allows determination of the panel’s radius of curvature as a function of the shape memory alloy actuators’ actuation temperature and panel configuration (number and orientation of plies, number and location of actuators, the materials’ properties, and the geometric arrangement). This design procedure integrates properties of the host structure (composite laminate) and of the actuators (shape memory alloy wires) in the framework of a unique design diagram. The performances of shape memory alloy actuators are obtained by experimental manipulations, whereas the rigidity of the host structure is calculated using the finite element numerical modeling approach. To validate the developed design procedure, a [90/90/90/wire/90] 425 × 425 × 5-mm adaptive panel prototype is fabricated using the vacuum-assisted resin transfer molding method. The results obtained from experimental tests are used to monitor the global performance of the adaptive panel and to validate the developed design procedure.
American Society for Testing and Materials (1994 [Reapproved 2001]) Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45° laminate. ASTM D 3518/D 3518M-94, 7 pp. West Conshohocken, PA: ASTM International.
2.
American Society for Testing and Materials (2006) Standard test method for tensile properties of polymer matrix composite materials. ASTM D 3039/D 3039M-08, 13 pp. West Conshohocken, PA: ASTM International.
3.
BarbarinoSGandhiFWebsterSD (2011) Design of extendable chord sections for morphing helicopter rotor blades. Journal of Intelligent Material Systems and Structures22(9): 891–905.
4.
BiloriaNSuminiV (2009) Performative building skin systems: a morphogenomic approach towards developing real-time adaptive building skin systems. International Journal of Architectural Computing7(4): 643–676.
5.
BrailovskiVTerriaultP (2010) A systematic approach to performance evaluation of shape memory alloys as actuator material. Materials Science Forum, vols 638–642, pp. 2034–2039. Trans Tech Publications Ltd.
6.
BrailovskiVProkoshkinSTerriaultP. (2003) Shape Memory Alloys: Fundamentals, Modeling and Applications. Montréal, QC, Canada: École de technologie supérieure, 844 pp.
7.
CalkinsFTMabeJH (2010) Shape memory alloy based morphing aerostructures. Journal of Mechanical Design: Transactions of the ASME132(11): 111012 (7 pp.).
8.
CoutuDBrailovskiVTerriaultP (2010) Optimized design of an active extrados structure for an experimental morphing laminar wing. Aerospace Science and Technology14(7): 451–458.
9.
DaynesSWeaverPM (2012) A morphing trailing edge device for a wind turbine. Journal of Intelligent Material Systems and Structures23(6): 691–701.
10.
DemersVBrailovskiVProkoshkinS. (2006) Functional properties of nanostructured Ti-50.0 at % Ni alloys. Journal of ASM International3(6): 11.
11.
GeorgesTBrailovskiVCoutuD. (2008) Design diagram for linear SMA actuators integrated in a morphing wing structure. In: International conference on shape memory and superelastic technologies—SMST-2007, Tsukuba, Japan, 3–5 December, pp. 455–462.
12.
GeorgesTBrailovskiVMorellonE. (2009) Design of shape memory alloy actuators for morphing laminar wing with flexible extrados. Journal of Mechanical Design: Transactions of the ASME131(9): 0910061–0910069.
13.
Ghasemi-NejhadMNRussRPourjalaliS (2005) Manufacturing and testing of active composite panels with embedded piezoelectric sensors and actuators. Journal of Intelligent Material Systems and Structures16(4): 319–333.
14.
KannoIKunisawaTSuzukiT. (2007) Development of deformable mirror composed of piezoelectric thin films for adaptive optics. IEEE Journal of Selected Topics in Quantum Electronics13(2): 155–161.
15.
KoratkarNAInderjitC (2001) Wind tunnel testing of a Mach-scaled rotor model with trailing-edge flaps. Smart Materials and Structures10(1): 1–14.
16.
LesueurGMerletTQueguinerM. (2009) Management of deformable active antenna. In: 2009 international radar conference radar “Surveillance for a Safer World” (RADAR 2009), Bordeaux, 12–16 October. New York: IEEE.
17.
MallickPK (2008) Fiber-Reinforced Composites: Materials, Manufacturing, and Design. Boca Raton, FL: CRC Press, 619 pp.
18.
PeelLDMejiaJNarvaezB. (2009) Development of a simple morphing wing using elastomeric composites as skins and actuators. Journal of Mechanical Design: Transactions of the ASME131(9): 0910031–0910038.
19.
RodriguesGBastaitsRPreumontA (2010) Morphing of segmented bimorph mirrors. International Journal of Optomechatronics4(3): 217–236.
20.
SimoneauCTerriaultPLacasseS. (2014) Adaptive composite panel with embedded SMA actuators: modeling and validation. Mechanics Based Design of Structures and Machines: An International Journal42: 174–192.
21.
SoflaAYNMeguidSATanKT. (2010) Shape morphing of aircraft wing: status and challenges. Materials & Design31(3): 1284–1292.
22.
TerriaultPBrailovskiV (2011) Modeling of shape memory alloy actuators using Likhachev’s formulation. Journal of Intelligent Material Systems and Structures22(4): 353–368.
23.
ThillCEtchesJABondIP. (2010) Composite corrugated structures for morphing wing skin applications. Smart Materials and Structures19(12): 124009 (10 pp.).
24.
TurnerTLPatelHD (2007) Analysis of SMA hybrid composite structures in MSC.Nastran and ABAQUS. Journal of Intelligent Material Systems and Structures18(5): 435–447.
25.
WaymanCMOtsukaK (1999) Shape Memory Materials. Cambridge: Cambridge University Press, 284 pp.
26.
XuYOtsukaKToyamaN. (2004) A novel technique for fabricating SMA/CFRP adaptive composites using ultrathin TiNi wires. Smart Materials and Structures13(1): 196–202.
27.
YoungYLBakerJWMotleyMR (2010) Reliability-based design and optimization of adaptive marine structures. Composite Structures92(2): 244–253.
28.
ZhouGLloydP (2009) Design, manufacture and evaluation of bending behaviour of composite beams embedded with SMA wires. Composites Science and Technology69(13): 2034–2041.
