End cap profile optimization of a piezoelectric Cymbal actuator for quasi-static operation by using a genetic algorithm

Abstract

This article describes how an extrinsically amplified Cymbal-type piezoelectric actuator is optimized for displacement generation by using genetic algorithms in combination with COMSOL Multiphysics finite element method modeling software. The research was focused on optimizing the shape of the end cap profile in a quasi-static operation scheme in order to keep the number of parameters and calculation times at a reasonable level. In contrast to conventional linear end cap profiles, a genetic algorithm tends to generate more complex shapes and especially a corrugated structure in the vicinity of the output point of force and displacement. Modeling showed that about 26.9% higher displacement could be produced with a complex shape derived by the algorithm compared with a linear end cap profile. Moreover, about the same level of displacement as achieved with a wagon wheel transducer was obtained simply by profile optimization without material removal, which could, however, improve performance even further. The developed genetic algorithm proved to be a feasible tool for complex multi-parameter optimization, utilizable in a wide range of shape and structure optimizations for future electromechanical components.

Keywords

Genetic algorithm piezoelectric Cymbal actuator

Get full access to this article

View all access options for this article.

References

Adams

Watson

Gürdal

(2002) Blending of composite panel designs using genetic algorithms. In: Proceedings of international parallel and distributed processing symposium, IPDPS2002, Ft. Lauderdale, FL, 15–19 April, pp. 409–414. New York: IEEE.

Bruant

Gallimard

Nikoukar

(2010) Optimal piezoelectric actuator and sensor location for active vibration control using genetic algorithm. Journal of Sound and Vibration329: 1615–1635.

Chang

L-K

Tsai

M-C

(2014) Design of star-shaped flextensional stator for ultrasonic motor. Advances in Mechanical Engineering. Epub ahead of print 26 May. DOI: 10.1155/2014/162535.

Chiu

C-W

Chao

PC-P

D-Y

(2007) Optimal design of magnetically actuated optical image stabilizer mechanism for cameras in mobile phones via genetic algorithm. IEEE Transactions on Magnetics43(6): 2582–2584.

Codreanu

(2005) A parallel between differential evolution and genetic algorithms with exemplification in a microfluidics optimization problem. In: Proceedings of the international semiconductor conference, CAS 2005, vol. 2, Sinaia, Romania, 5 October, pp. 421–424. New York: IEEE.

Darnobyt

Kryvyy

Lobur

. (2008) Possibilities of the use of genetic algorithms in design of MEMS elements. In: Proceedings of international conference on perspective technologies and methods in MEMS design, MEMSTECH 2008, Polyana, 21–24 May, p. 87. New York: IEEE.

Eiben

Smith

(2003) Introduction to Evolutionary Computing. Berlin, Heidelberg: Springer-Verlag.

Franco

Varoto

(2013) On different optimization techniques applied to vibration-based piezoelectric energy harvesting. In: Proceedings XV international symposium on dynamic problems of mechanics, XV DINAME, Rio de Janeiro, Brazil, 17–22 February, pp. 1–4. ABCM.

Hart

GLW

Blum

Walorski

. (2005) Evolutionary approach for determining first-principles Hamiltonians. Nature Materials4: 391–394.

10.

Iwasaki

Ikeda

(2001) Optimal design of flat structures for vibration suppression. In: Proceedings of IEEE international conference on control applications, CCA 2001, Mexico City, Mexico, 5–7 September, pp. 583–587. New York: IEEE.

11.

Koc

Dogan

Fernández

. (1996) Accelerometer application of the modified Moonie (Cymbal) transducer. Japanese Journal of Applied Physics 35: 4547–4549.

12.

Lee

Kim

(2003) Thin-film bulk acoustic resonator RF bandpass filter design technique using genetic algorithm. Electronics Letters 39(5): 444–445.

13.

Leinonen

Palosaari

Juuti

. (2014) Combined electrical and electromechanical simulations of a piezoelectric cymbal harvester for energy harvesting from walking. Journal of Intelligent Material Systems and Structures 25(4): 391–400.

14.

Leu

Simion

Serbanescu

(2004) MEMS optimization using genetic algorithms. In: Proceedings of international semiconductor conference, CAS 2004, vol. 2, Sinaia, Romania, 4–6 October, pp. 475–478. New York: IEEE.

15.

Shih

Vartuli

. (2002) Effect of a transverse tensile stress on the electric-field-induced domain reorientation in soft PZT: in situ XRD study. Journal of the American Ceramic Society 86(4): 844–850.

16.

Maione

Shung

Meyer

. (2002) Transducer design for a portable ultrasound enhanced transdermal drug-delivery system. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 49: 1430–1436.

17.

Meyer

Hughes

Montgomery

. (2002) Design of and fabrication improvements to the cymbal transducer aided by finite element analysis. Journal of Electroceramics 8: 163–174.

18.

Motiee

Khajepour

Mansour

(2008) A new topology optimization method for multi-physics micro domains. In: Proceedings of IEEE/ASME international conference on mechatronic and embedded systems and applications, MESA 2008, Beijing, China, 12–15 October, pp. 106–111. New York: IEEE.

19.

Narayanan

Schwartz

(2010) Design fabrication and finite element modeling of a new wagon wheel flextensional transducer. Journal of Electroceramics 24: 205–213.

20.

Obayashi

Sasaki

Takeguchi

. (2000) Multiobjective evolutionary computation for supersonic wing-shape optimization. IEEE Transactions on Evolutionary Computation 4(2): 182–187.

21.

Oyama

Obayashi

Nakahashi

(1999) Wing design using real-coded adaptive range genetic algorithm. In: Proceedings of IEEE international conference on systems, man, and cybernetics, IEEE SMC 1999, vol. 4, Tokyo, Japan, 12–15 October, pp. 475–480. New York: IEEE.

22.

Palosaari

Juuti

Heinonen

. (2009) Electromechanical performance of structurally graded monolithic piezoelectric actuator. Journal of Electroceramics 22(1): 156–162.

23.

Saxena

(2005) Topology design of large displacement compliant mechanisms with multiple materials and multiple output ports. Structural and Multidisciplinary Optimization 30(6): 477–490.

24.

Silva

Nader

Shirahige

. (2003) Characterization of novel flextensional actuators designed by using topology optimization method. Journal of Intelligent Material Systems and Structures 14(4–5): 297–308.

25.

Tressler

Dogan

Fernández

. (1995) Capped ceramic hydrophones. In: Proceedings of the 1995 IEEE ultrasonics symposium, vol. 2, Seattle, WA, 7–10 November, pp. 897–900. New York: IEEE.

26.

Zhang

Zhao

(1999) Electromechanical properties of lead zirconate titanate piezoceramics under the influence of mechanical stresses. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 46(6): 1518–1526.