Fan-structure wind energy harvester using circular array of polyvinylidene fluoride cantilevers

Abstract

A fan-structure piezoelectric energy harvester was proposed and tested in order to collect wind energy. Polyvinylidene fluoride was chosen due to its flexibility and longevity when compared to lead zirconate titanate. The impact-induced piezoelectric energy harvester consists of a stator and a rotor and a circular array of four cantilevers, utilize the rotor blades’ periodic impact on the free end of the cantilevers to generate oscillatory motion of cantilevers. A circular array of polyvinylidene fluoride cantilevers was fixed around the rotor in order to increase output power, save space at the same time. Static and transient characteristics of different cantilevers were investigated using finite element method and the result showed that polyvinylidene fluoride triangular cantilever performs the best in output voltage and power. Under the condition of optimal impedance and optimal overlap distance, a sum AC output power of four cantilevers without connection to each other approach to 0.75 mW was measured at the wind speed of 7 m/s when the blade number of rotor is 7 or 9. Two branches 0.27 mW DC output power was obtained when each two cantilevers in parallel connection in the case of full-wave rectification of each cantilever at the wind speed of 7 m/s.

Keywords

wind energy polyvinylidene fluoride piezoelectric array energy harvesting

Get full access to this article

View all access options for this article.

References

Al-Ashtari

Hunstig

Hemsel

. (2013) Enhanced energy harvesting using multiple piezoelectric elements: theory and experiments. Sensors and Actuators A: Physical200: 138–146.

Berdy

Srisungsitthisunti

Jung

. (2012) Low-frequency meandering piezoelectric vibration energy harvester. IEEE Transactions on Ultrasonics Ferroelectrics & Frequency Control59: 846–858.

Clair

Bibo

Sennakesavababu

. (2010) A scalable concept for micropower generation using flow-induced self-excited oscillations. Applied Physics Letters96: 144103.

Dang

Dong

Bai

. (2011) Performance of piezoelectric stack for energy harvesting from low frequency vibration. Journal of Power Supply9(4): 56–62.

Deng

Chen

Tao

(2010) Study on vibration energy harvesting behaviors of piezoelectric cantilevers with different geometries. Piezoelectrics & Acoustooptics3: 440–443.

(2012) Micro piezoelectric wind energy harvester with a resonant cavity. Chinese Journal of Sensors & Actuators25: 748–750.

Ewere

Wang

Cain

(2014) Experimental investigation of galloping piezoelectric energy harvesters with square bluff bodies. Smart Materials & Structures23: 104012.

Gao

Shih

(2013) Flow energy harvesting using piezoelectric cantilevers with cylindrical extension. IEEE Transactions on Industrial Electronics60: 1116–1118.

Guan

Bai

Dong

(2014) Design and testing of wind energy harvester based on PVDF. Key Engineering Materials 613: 185–192.

10.

Kong

. (2010) Piezoelectric wind-energy-harvesting device with reed and resonant cavity. Japanese Journal of Applied Physics 49: 311–333.

11.

Kwon

(2010) A T-shaped piezoelectric cantilever for fluid energy harvesting. Applied Physics Letters97: 164102.

12.

Yuan

Lipson

(2011) Ambient wind energy harvesting using cross-flow fluttering. Journal of Applied Physics109: 026104.

13.

Liu

Tay

Quan

. (2011) Piezoelectric MEMS energy harvester for low-frequency vibrations with wideband operation range and steadily increased output power. Journal of Microelectromechanical Systems20: 1131–1142.

14.

Han

. (2010) Development of a tree-shaped wind power system using piezoelectric materials. International Journal of Energy Research34: 431–437.

15.

Priya

(2005) Modeling of electric energy harvesting using piezoelectric windmill. Applied Physics Letters87: 184101–184103.

16.

Qiu

Haraguchi

(2006) Vibration control of a plate using a self-sensing piezoelectric actuator and an adaptive control approach. Journal of Intelligent Material Systems and Structures17: 661–669.

17.

Secord

Mazumdar

Asada

(2010) A multi-cell piezoelectric device for tunable resonance actuation and energy harvesting. In: 2010 IEEE international conference on robotics and automation (ICRA), Anchorage, AK, 3–7 May, pp. 2169–2176. New York: IEEE.

18.

Shan

Yuan

Xie

. (2010) Modeling and simulation of power generation with piezoelectric unimorph cantilever. Journal of Zhejiang University44: 528–532.

19.

Tan

Panda

(2007) A novel piezoelectric based wind energy harvester for low-power autonomous wind speed sensor. In: IECON 2007 33rd annual conference of the IEEE industrial electronics society, Taipei, China, 5–8 November, pp. 2175–2180. New York: IEEE.

20.

Ting

Chang

Gunawan

(2010) Circuitry design for direct wind energy harvest system. In: 2010 IEEE international symposium on industrial electronics (ISIE), Bari, 4–7 July, pp. 694–699. New York: IEEE.

21.

Vatansever

Hadimani

Shah

. (2011) An investigation of energy harvesting from renewable sources with PVDF and PZT. Smart Materials & Structures20: 55019–55024.

22.

Wen

Deng

Zhao

. (2014) Improving voltage output with PZT beam array for MEMS-based vibration energy harvester: theory and experiment. Microsystem Technologies21: 331–339.

23.

William

Dustin

Ivan

. (2006) Wind-generated electrical energy using flexible piezoelectric materials. In: Proceedings of ASME international mechanical engineering congress & exposition, Chicago, IL, 5–10 November, vol. 23, pp. 581–590. New York, NY: ASME.

24.

Yan

Abdelkefi

Hajj

(2014) Piezoelectric energy harvesting from hybrid vibrations. Smart Materials & Structures23: 204–204.

25.

Zhao

Tang

Yang

(2014) Enhanced piezoelectric galloping energy harvesting using 2 degree-of-freedom cut-out cantilever with magnetic interaction. Japanese Journal of Applied Physics53: 060302.

26.

Zhao

Wen

(2013) Design of a miniaturized wind energy harvester based on a fluttering flexible beam. Journal of Chongqing University2013: 145–150.