High actuation force of piezoelectric hybrid actuator with multiple piezoelectric pump design

Abstract

The piezoelectric hybrid actuator is a new electro-hydrostatic actuator with broad prospects for development. Compared with the traditional hydraulic pump, the piezoelectric hybrid actuator is characterized by a simple structure, small size, lightweight, and low power. However, it has a well-known weakness: It produces only a small actuation force and then cannot be used in real applications. Because the maximum force produced by a one-piezoelectric pump design cannot be increased much due to limitations in the power supply and piezoelectric materials, researchers have moved to the use of multiple piezoelectric pumps. In this research, a double-piezoelectric pump-hydraulic cylinder hybrid actuator was designed, manufactured, and tested in order to increase the actuation force. Key design factors such as the connection method and driving method were investigated to realize the double-piezoelectric pump design and achieve a high level of performance. A total of three kinds of double-piezoelectric pump-hydraulic cylinder hybrid actuator designs were selected by a theoretical approach and implemented using two identical piezoelectric pumps. A manual valve system was installed for switching the connection method (series and parallel modes). The driving method, phase, or voltage was controlled by a LabVIEW program. The maximum blocking force of 4615 N was measured at 250 Hz for cross driving, series connection and φ30-mm cylinder. The maximum velocity of 68.3 mm/s was measured at 300 Hz for cross driving, series connection and φ21-mm cylinder. Fluid structural interaction analysis using ANSYS software confirmed the experimental results. The performance of double-piezoelectric pump-hydraulic hybrid actuator meets the minimum requirements for mechanical and aerospace actuator applications.

Keywords

Hybrid actuator double-piezoelectric pump driving method connection method blocking force fluid structural interaction

Get full access to this article

View all access options for this article.

References

Benra

F-K

Dohmen

Pei

Schuster

Wan

(2011) A comparison of one-way and two-way coupling methods for numerical analysis of fluid-structure interactions. Journal of Applied Mathematics2011: 853560 (16 pp).

Cadou

Zhang

(2003) Performance modeling of a piezo-hydraulic actuator. Journal of Intelligent Material Systems and Structures 14: 149–160.

Chaudhuri

Joo

Wereley

(2009) Design, test and model of a hybrid magnetostrictive hydraulic actuator. Smart Materials and Structures 18: 085019 (21 pp).

Chaudhuri

Wereley

(2010) Experimental validation of a hybrid electrostrictive hydraulic actuator analysis. Journal of Vibration and Acoustics 132: 021006–021017.

Ellison

(2005) Investigation of active materials as driving elements in a hydraulic-hybrid actuator. Master’s Thesis, University of Maryland, College Park, College Park, MD.

Hurst

(2002) Piezohydraulic actuator design and modeling using a lumped-parameter approach. Master’s Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.

Jin

Goo

Woo

Kim

Lee

. (2015) Experimental study on the performance of a bidirectional hybrid piezoelectric-hydraulic actuator. International Journal of Aeronautical and Space Sciences.

John

Chaudruri

Wereley

(2008) A magnetorheological actuation system: test and model. Smart Materials and Structures 17: 025023 (15 pp).

Kan

Peng

Tang

et al . (2006) The structure and performance of double-chamber piezoelectric pumps. Piezoelectric & Acoustooptlcs 28: 39–42.

10.

Kan

Tang

Liu

Zhu

Shao

. (2008) Development of serial-connection piezoelectric pumps. Sensors and Actuators A: Physical 144: 321–327.

11.

Konishi

Yoshimura

Hashimoto

et al . (1993) Hydraulic actuators driven by piezoelectric elements: 1st report, trial piezoelectric pump and its maximum power. Transactions of the Japan Society of Mechanical Engineers Series C 59: 2477–2484.

12.

Mauck

Lynch

(2000) Piezoelectric hydraulic pump development. Journal of Intelligent Material Systems and Structures 11: 758–764.

13.

PI Ceramic (2012) Fundamentals of piezoelectric actuators. Available at: http://www.piezo.ws/piezoelectric_actuator_tutorial/Piezo_Design_part3.php (accessed 15 March 2014).

14.

Sirohi

Chopra

(2003) Design and development of a high pumping frequency piezoelectric-hydraulic hybrid actuator. Journal of Intelligent Material Systems and Structures 14: 135–147.

15.

Sirohi

Cadou

Chopra

(2005) Investigation of the dynamic characteristics of a piezohydraulic actuator. Journal of Intelligent Material Systems and Structures 16: 481–492.

16.

Sun

(2009) Designing theory and structural optimizing technology study on double-vibrator piezo-pump. PhD Thesis, Jilin University, Jilin.

17.

Tan

(2002) Performance modeling and efficiency analysis for a piezohydraulic pump with active valves. Master’s Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.

18.

Tan

Hurst

Leo

(2005) Performance modeling of a piezohydraulic actuation system with active valves. Smart Materials and Structures 14: 91–110.

19.

Ullmann

(1998) The piezoelectric valve-less pump-performance enhancement analysis. Sensors and Actuators A: Physical 69: 321–327.

20.

Xuan

Jin

et al . (2014) Performance of piezo-stacks for a piezoelectric hybrid actuator by experiments. Journal of Intelligent Material Systems and Structures 25: 2212–2220.