Wireless energy harvesting using time reversal technique: An experimental study with numerical verification

Abstract

Fully embedded devices and portable devices located in inaccessible areas may be constrained in terms of service lifespan due to limitations in battery capacity. Furthermore, conventional electromagnetic-based wireless charging may be difficult due to environmental interference. Thus, in this article, we present a method that can remotely charge such devices through piezo-generated stress waves that propagate along the structure hosting the device to be charged. However, in order to fully utilize such a conduit for transmitting energy, the dispersive and scattering nature of solid materials should be overcome. As a way to overcome this obstacle, the method innovatively applies the time reversal technique for use in energy harvesting. Through the time reversal technique, the energy transmitted by external actuators, instead of dispersing unhelpfully around the device, can be focused tightly at the energy harvesting component of the device. The method was successfully demonstrated on a copper pipe using four piezoelectric transducers. It was further found that time-reversed signals from multiple actuators can linearly superimpose to increase the amount of energy focused on the energy harvester, thus potentially solving problems related to distance and the signal attenuating properties of the material in the hosting structure. The method was also modeled and simulated using the finite element method through the commercial FE-package Abaqus. Results from both experiment and simulation matched well, thus demonstrating the viability of the wireless energy harvesting method.

Keywords

Stress wave piezoelectric time reversal technique energy harvesting energy focusing

Get full access to this article

View all access options for this article.

References

Edelmann

Song

Kim

et al . (2005) Underwater acoustic communications using time reversal. IEEE Journal of Ocean Engineering30: 852–864.

Graham

Neasham

Sharif

(2011) Investigation of methods for data communication and power delivery through metals. IEEE Transactions on Industrial Electronics58: 4972–4980.

Zhang

Yang

et al . (2003) Transmitting electric energy through a metal wall by acoustic waves using piezoelectric transducers. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control50: 773–781.

Kluge

Becker

Schalk

et al . (2008) Remote acoustic powering and data transmission for sensors inside of conductive envelopes. In: Proceedings of IEEE sensor, Lecce, 26–29 October, pp. 41–44. New York: IEEE.

Lawry

Saulnier

Ashdown

et al . (2011) Penetration-free system for transmission of data and power through solid metal barriers. In: Proceedings of IEEE military communications conference, Baltimore Convention Center, Baltimore, MD, 7–10 November, pp. 389–395. New York: IEEE.

Lee

(2012) Energy harvesting for wireless sensor networks. Doctoral Dissertation, University of California, Berkeley, CA.

Song

et al . (2010) Concrete structural health monitoring using piezoceramic-based wireless sensor networks. Smart Structures and Systems6: 731–748.

Lü

Yang

Wang

et al . (2009) Power transmission through a hollow cylinder by acoustic waves and piezoelectric transducers with radial polarization. Journal of Sound and Vibration325: 989–999.

Mascareñas

Flynn

Farrar

et al . (2009) A mobile host approach for wireless powering and interrogation of structural health monitoring sensor networks. IEEE Sensors Journal9: 1719–1726.

10.

Ostachowicz

Kudela

Krawczuk

et al . (2011) Guided Waves in Structures for SHM: The Time-Domain Spectral Element Method. Hoboken, NJ: John Wiley & Sons.

11.

Parvasi

SCM

Kong

et al . (2016) Real time bolt preload monitoring using piezoceramic transducers and time reversal technique—a numerical study with experimental verification. Smart Materials and Structures25(8): 085015.

12.

Rose

(2004) Ultrasonic guided waves in structural health monitoring. Key Engineering Materials270: 14–21.

13.

Sherrit

Doty

Badescu

et al . (2006) Studies of acoustic-electric feed-throughs for power transmission through structures. In: Proceedings of the SPIE international society for optical engineering, San Diego, CA, USA, 30 March, vol. 6171. Bellingham, WA: SPIE.

14.

Shoudy

Saulnier

Scarton

(2007) An ultrasonic through-wall communication system with power harvesting. In: 2007 IEEE ultrasonics symposium, New York, 28–31 October, pp. 1848–1853. New York: IEEE.

15.

Song

(2008) Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a review. Smart Materials and Structures17(3): 033001.

16.

Sudevalayam

Kulkarni

(2011) Energy harvesting sensor nodes: survey and implications. IEEE Communications Surveys & Tutorials13(3): 443–461.

17.

Vullers

Schaijk

Visser

et al . (2010) Energy harvesting for autonomous wireless sensor networks. IEEE Solid-State Circuits Magazine2: 29–38.

18.

Zhang

Luo

Rose

(2005) Ultrasonic guided waves focused beyond welds in pipeline. Proceedings of QNDE25: 877–884.