Integrated active and semi-active control for seat suspension of a heavy duty vehicle

Abstract

In this article, an integrated active and semi-active seat suspension for heavy duty vehicles is proposed, and its prototype is built; an integrated control algorithm applied measurable variables (suspension relative displacement and seat acceleration) is designed for the proposed seat prototype. In this seat prototype, an active actuator with low maximum force output (70 N), which is insufficient for an active seat suspension to control the resonance vibration, is applied together with a rotary magnetorheological damper. The magnetorheological damper can suppress the high vibration energy in resonance frequency, and then a small active force can further improve the seat suspension performance greatly. The suspension’s dynamic property is tested with a MTS system, and its model is identified based on the testing data. A modified on–off controller is applied for the rotary magnetorheological damper. A $H_{\infty}$ controller with the compensation of a disturbance observer is used for the active actuator. Considering the energy saving, the control strategy is designed as that only when the magnetorheological damper is in the off state (0 A current), the active actuator will have active force output, or the active actuator is off. Both simulation and experiment are implemented to verify the proposed seat suspension and controller. In the sinusoidal excitations experiment, the acceleration transmissibility of integrated control seat has lowest value in resonance frequency and frequencies above the resonance, when compared with power on (0.7 A current), power off (0 A current) and semi-active control seat. In the random vibration experiment, the root mean square acceleration of integrated control seat suspension has 47.7%, 33.1% and 26.5% reductions when compared with above-mentioned three kinds of seat suspension. The power spectral density comparison indicates that the integrated seat suspension will have good performance in practical application. The integrated active and semi-active seat suspension can fill energy consumption gap between active and semi-active control seat suspension.

Keywords

Active control semi-active control seat suspension vibration control

Get full access to this article

View all access options for this article.

References

Choi

S-B

Han

Y-M

(2007) Vibration control of electrorheological seat suspension with human-body model using sliding mode control. Journal of Sound and Vibration 303: 391–404.

Choi

S-B

Lee

Y-S

Han

M-S

(2015) Vibration control of a vehicle’s seat suspension featuring a magnetorheological damper based on a new adaptive fuzzy sliding-mode controller. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 230: 437–458.

Choi

S-B

Nam

M-H

Lee

B-K

(2000) Vibration control of a MR seat damper for commercial vehicles. Journal of Intelligent Material Systems and Structures 11: 936–944.

Lam

Cheung

et al . (2013) Direct voltage control of magnetorheological damper for vehicle suspensions. Smart Materials and Structures 22: 105016–105028.

Gan

Hillis

Darling

(2015) Adaptive control of an active seat for occupant vibration reduction. Journal of Sound and Vibration 349: 39–55.

McPhee

(2005) Multidisciplinary design optimization of mechatronic vehicles with active suspensions. Journal of Sound and Vibration 283: 217–241.

Hiemenz

Wereley

(2008) Semi-active magnetorheological helicopter crew seat suspension for vibration isolation. Journal of Aircraft 45: 945–953.

Kawana

Shimogo

(1998) Active suspension of truck seat. Shock and Vibration 5: 35–41.

Mabbott

Foster

McPhee

(2001) Heavy Vehicle Seat Vibration and Driver Fatigue. Canberra, ACT, Australia: Australian Transport Safety Bureau.

10.

Maciejewski

(2012) Control system design of active seat suspensions. Journal of Sound and Vibration 331: 1291–1309.

11.

Maciejewski

Meyer

Krzyzynski

(2010) The vibration damping effectiveness of an active seat suspension system and its robustness to varying mass loading. Journal of Sound and Vibration 329: 3898–3914.

12.

Metered

Šika

(2014) Vibration control of a semi-active seat suspension system using magnetorheological damper. In: Proceedings of the 2014 IEEE/ASME 10th international conference on mechatronic and embedded systems and applications (MESA), Senigallia, 10–12 September, pp. 1–7. New York: IEEE.

13.

Ning

Sun

et al . (2016) Active control of an innovative seat suspension system with acceleration measurement based friction estimation. Journal of Sound and Vibration 384: 28–44.

14.

Paddan

Griffin

(2002) Effect of seating on exposures to whole-body vibration in vehicles. Journal of Sound and Vibration 253: 215–241.

15.

Sun

Ning

Yang

et al . (2016) A seat suspension with a rotary magnetorheological damper for heavy duty vehicles. Smart Materials and Structures 25: 105032.

16.

Türkay

Akçay

(2008) Aspects of achievable performance for quarter-car active suspensions. Journal of Sound and Vibration 311: 440–460.

17.

Yang

et al . (2013) Experimental study and modeling of a novel magnetorheological elastomer isolator. Smart Materials and Structures 22: 117001.

18.

Zhao

Sun

Gao

(2010) Robust control synthesis for seat suspension systems with actuator saturation and time-varying input delay. Journal of Sound and Vibration 329: 4335–4353.

19.

Zhu

Jing

Cheng

(2012) Magnetorheological fluid dampers: a review on structure design and analysis. Journal of Intelligent Material Systems and Structures 23: 839–873.