High-output piezoelectric energy harvester using tapered beam with cavity

Abstract

Energy harvesting using cantilever-based piezoelectric structure is most popular for harvesting electrical energy from ambient vibrations. Efforts are also made to maximize the harvester power by means of tailoring the structural parameters of the cantilever beam. This article proposes a method to maximize the harvester voltage from the cantilever-based piezoelectric energy harvester by means of tailoring the structure of the cantilever, to have a tapering in width, thickness and in both width and thickness (double taper). It is also proposed to introduce rectangular and trapezoidal cavities in the tapered energy harvesters to further maximize the harvester voltage. The analytical model of the proposed harvesters is developed using Euler–Bernoulli beam theory, and its free vibration solution is analysed using Bessel functions. The energy harvesters are fabricated and experimentally evaluated for its performance. It is concluded from the results of analytical model and experimentation that width, thickness and double-tapered beam increases the harvester voltage by 35.6%, 84.8% and 126.6%, respectively, as compared to the energy harvester designed with uniform cantilever beam. Among all the energy harvesters proposed in this article, the maximum voltage is generated from the double-tapered beam with trapezoidal cavity. The experimental results are in close agreement with the results obtained from the analytical model.

Keywords

Cantilever beam cavity beam energy harvester piezoelectric tapered beam

Get full access to this article

View all access options for this article.

References

Abdelkefi

Barsallo

(2014) Comparative modeling of low-frequency piezo magnetoelastic energy harvesters. Journal of Intelligent Material Systems and Structures 25(14): 1771–1785.

Abramowitz

Stegun

(1972) Handbook of Mathematical Functions: With Formulas, Graphs, and Mathematical Tables. Mineola, NY: Dover Publications.

Boiangiu

Ceausu

Untaroiu

(2014) A transfer matrix method for free vibration analysis of Euler-Bernoulli beams with variable cross section. Journal of Vibration and Control 22(11): 2591–2602.

Chen

Wang

Chien

(2006) Analytical modeling of piezoelectric vibration-induced micro power generator. Mechatronics 16: 379–387.

Chen

Yang

Wang

et al . (2012) Vibration energy harvesting with a clamped piezoelectric circular diaphragm. Ceramics International 38(Suppl. 1): S271–S274.

Dai

Abdelkefi

Wang

(2014) Piezoelectric energy harvesting from concurrent vortex-induced vibrations and base excitations. Nonlinear Dynamics 77: 967–981.

Erturk

(2009) Electromechanical modeling of piezoelectric energy harvesters. PhD Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.

Erturk

Inman

(2008) A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters. Journal of Vibration and Acoustics 130: 041002.

Erturk

Inman

(2011) Piezoelectric Energy Harvesting. Chichester: John Wiley & Sons.

10.

Juil

Lee

Kwak

(2012) Design optimization of piezoelectric energy harvester subject to tip excitation. Journal of Mechanical Science and Technology 26(1): 137–143.

11.

(2010) Improving power density of a cantilever piezoelectric power harvester through a curved L-shaped proof mass. IEEE Transactions on Industrial Electronics 57(3): 868–876.

12.

Liao

Sodano

(2012) Optimal placement of piezoelectric material on a cantilever beam for maximum piezoelectric damping and power harvesting efficiency. Smart Materials and Structures 21(10): 105014.

13.

Matova

Renaud

Jambunathan

et al . (2013) Effect of length/width ratio of tapered beams on the performance of piezoelectric energy harvesters. Smart Materials and Structures 22(7): 075015.

14.

Muthalif

AGA

Nordin

NHD

(2015) Optimal piezoelectric beam shape for single and broadband vibration energy harvesting: modeling, simulation and experimental results. Mechanical System and Signal Processing 54–55: 417–426.

15.

Chen

Gutschmidt

et al . (2012) An experimentally validated double-mass piezoelectric cantilever model for broadband vibration-based energy harvesting. Journal of Intelligent Material Systems and Structures 23(2): 117–126.

16.

Priya

(2007) Advances in energy harvesting using low profile piezoelectric transducers. Journal of Electroceramics 19: 165–182.

17.

Raju

Umapathy

Uma

(2015) Cantilever piezoelectric energy harvester with multiple cavities. Smart Materials and Structures 24: 115023.

18.

Reddy

Umapathy

Ezhilarasi

et al . (2014) Improved energy harvesting from vibration by introducing cavity in a cantilever beam. Journal of Vibration and Control 22(13): 3057–3066.

19.

Salmani

Rahimi

Kordkheili

SAH

(2015) An exact analytical solution to exponentially tapered piezoelectric energy harvester. Shock and Vibration 2015: 426876.

20.

Sanger

(1968) Transverse vibration of a class of non-uniform beams. Journal of Mechanical Engineering Science 10(2): 111–120.

21.

Santhosh Kumar

BVMP

Suresh

Kumar

et al . (2012) Resonance based DC current sensor. Measurement 45: 369–374.

22.

Sodano

Inman

(2004) A review of power harvesting from vibration using piezoelectric materials. The Shock and Vibration Digest 36(3): 197–205.

23.

Wang

(2012) Optimal design of a piezoelectric coupled beam for power harvesting. Smart Materials and Structures 21: 085013.

24.

Wang

(2007) Vibration energy harvesting device based on air-spaced piezoelectric cantilevers. Applied Physics Letters 90: 263512–263513.

25.

Zhou

Chen

Malakooti

et al . (2016) Design and modeling of a flexible longitudinal zigzag structure for enhanced vibration energy harvesting. Journal of Intelligent Material Systems and Structures 28(3): 367–380.

26.

Zhu

Worthington

Tiwari

(2010) Design study of piezoelectric energy harvesting devices for generation of higher electrical power using a coupled piezoelectric-circuit finite element method. IEEE Transactions on Ultrasonics Ferroelectrics, and Frequency Control 57(2): 427–437.