Piezoelectrically induced snap-through buckling in a buckled beam bonded with a segmented actuator

Abstract

In this article, a mathematical model is developed to analyze piezoelectrically induced deformations of bistable smart beams with various geometric configurations and boundary conditions. The model delineates a straight beam bonded with a segmented piezoelectric material. Three types of support conditions are considered, namely, simple, clamped–clamped, and clamped–pinned supports. The beam is buckled into two possible stable curved shapes by means of edge shortening compression. A sudden change in transverse deflection from one to the other stable shape, so-called snap-through action, can be stimulated by electrical activation given to the piezoelectric material. The minimum potential energy principle associated with the modified Ritz method is used to predict developing shapes of the smart beam and the snap-through voltage. Principal minors of bordered Hessian matrix are calculated to determine the stability of the shapes obtained. Experiments were also conducted to corroborate the computational results in the case of the simply-supported smart beam. Comparisons between the two approaches reveal very good agreements in both mid-span displacements of buckled shapes and snap-through voltages. Finally, size and location of the segmented piezoelectric actuator are varied to search for the minimum critical electrical field for each support condition.

Keywords

Snap-through buckling piezoelectric segmented actuator critical voltage stability mode shape

Get full access to this article

View all access options for this article.

References

Atsushi

Hiroshi

Hiromi

et al . (2010) A compact jumping robot utilizing snap-through buckling with bend and twist. In: IEEE/RSJ international conference on intelligent robots and systems. Taipei, Taiwan, 18–22 October, pp. 389–394. New York: IEEE.

Beharic

Lucas

Harnett

(2014) Analysis of a compressed bistable buckled beam on a flexible support. Journal of Applied Mechanics 81(8): 081011.

Camescasse

Fernandes

Pouget

(2013) Bistable buckled beam: elastica modeling and analysis of static actuation. International Journal of Solids and Structures 50(19): 2881–2893.

Camescasse

Fernandes

Pouget

(2014) Bistable buckled beam and force actuation: experiment validations. International Journal of Solids and Structures 51(9): 1750–1757.

Cazottes

Fernandes

Pouget

et al . (2008) Actuation of bistable buckled beams with macro-fiber composites. In: IEEE/RSJ international conference on intelligent robots and systems, Nice, 22–26 September, pp. 564–569. New York: IEEE.

Cazottes

Fernandes

Pouget

et al . (2009) Bistable buckled beam: modeling of actuating force and experimental validations. Journal of Mechanical Design 131(10): 101001.

Charlot

Sun

Yamashita

et al . (2008) Bistable nanowire for micromechanical memory. Journal of Micromechanics and Microengineering 18(4): 045005.

Chen

Hung

(2012) Exact snapping loads of a buckled beam under a midpoint force. Applied Mathematical Modelling 36(4): 1776–1782.

Chiang

Wright

(2004) Fundamental Methods of Mathematical Economics. New York: McGraw-Hill.

10.

Cleary

(2015) Modeling and experimental validation of actuating a bistable buckled beam via moment input. Journal of Applied Mechanics 82(5): 051005.

11.

Deraemaeker

Nasser

Benjeddou

et al . (2009) Mixing rules for the piezoelectric properties of macro fiber composites. Journal of Intelligent Material Systems and Structures 20(12): 1475–1482.

12.

Giannopoulos

Monreal

Vantomme

(2007a) Snap-through buckling behavior of piezoelectric bimorph beams: I. Analytical and numerical modeling. Smart Materials and Structures 16(4): 1148–1157.

13.

Giannopoulos

Monreal

Vantomme

(2007b) Snap-through buckling behavior of piezoelectric bimorph beams: II. Experimental verification. Smart Materials and Structures 16(4): 1158–1163.

14.

Hyer

(1997) Stress Analysis of Fiber-Reinforced Composite Materials. Singapore: WCB/McGraw-Hill.

15.

Lee

et al . (2002) Development and application of a laterally driven electromagnetic microactuator. Applied Physics Letters 81(3): 547–549.

16.

Maurin

Pouget

Stefano

(2007) Distributed piezoelectric actuation of a bistable buckled beam. European Journal of Mechanics: A/Solids 26(5): 837–853.

17.

Nan

Rigoberto

(2015) Buckling-induced smart applications: recent advances and trends. Smart Materials and Structures 24(6): 063001.

18.

Plaut

(2015) Snap-through of arches and buckled beams under unilateral displacement control. International Journal of Solids and Structures 63: 109–113.

19.

Reddy

(1993) An Introduction to the Finite Element Method. New York: McGraw Hill.

20.

Smart Material Cooperation (2018) Macro fiber composite—MFC properties. Available at: https://www.smart-material.com/MFC-product-properties.html (accessed 20 January 2018).

21.

Tsuda

Mochiyama

Fujimoto

(2012) Quick stair-climbing using snap-through buckling of closed elastica. In: International symposium on micro-nanomechatronics and human science (MHS), Nagoya, Japan, 4–7 November, pp. 368–373. New York: IEEE.