A magnetorheological elastomer rail damper for wideband attenuation of rail noise and vibration

Abstract

The noise and vibration effects of rails can have a significant impact on the environment surrounding the railways. Rail dampers are elements that are attached to the sides of the rail and can improve the track decay rate of rail and then enhance the rails’ ability to attenuate noises and vibrations. However, in practical applications, the most efficient rail damper design still cannot adjust its own parameters to adapt to different requirements because their stiffness and damping are fixed after designed. In this work, a tunable magnetorheological elastomer rail damper that works on the principle of a dynamic vibration absorber has been designed, analysed, characterised, and experimentally tested for the suppression of railway noise and vibration. The new rail damper incorporates variable stiffness magnetorheological elastomer layers, whose stiffness can be controlled by an externally applied magnetic field, to realise adaptive characteristics. Experimental characterisations of the magnetorheological elastomer rail damper were performed with an electromagnetic shaker. Subsequently, theoretical predictions of the track decay rate of a UIC-60 rail with different rail dampers and without rail damper were conducted; simulation results verified that magnetorheological elastomer rail dampers can improve the track decay rate of rail over a wider frequency range compared to conventional rail dampers and thus the performance of the magnetorheological elastomer rail damper outperforms other conventional rail dampers on rail noise reduction.

Keywords

Magnetorheological elastomer rolling noise rail damper vibration and noise attenuation tunable frequency

Get full access to this article

View all access options for this article.

References

Aziz

Mazlan

Ismail

, et al. (2016) Effects of multiwall carbon nanotubes on viscoelastic properties of magnetorheological elastomers. Smart Materials and Structures 25: 077001.

Bai

Wereley

(2015) Maximizing semi-active vibration isolation utilizing a magnetorheological damper with an inner bypass configuration. Journal of Applied Physics 117: 17C711.

Behrooz

Wang

Gordaninejad

(2014) Modeling of a new semi-active/passive magnetorheological elastomer isolator. Smart Materials and Structures 23: 045013.

Deng

Gong

(2008) Application of magnetorheological elastomer to vibration absorber. Communications in Nonlinear Science and Numerical Simulation 13: 1938–1947.

Deng

Gong

Wang

(2006) Development of an adaptive tuned vibration absorber with magnetorheological elastomer. Smart Materials and Structures 15: N111.

Dong

Huang

, et al. (2005) Half car magnetorheological suspension system accounting for nonlinearity and time delay. International Journal of Modern Physics B 19: 1381–1387.

Ginder

Clark

Schlotter

, et al. (2002) Magnetostrictive phenomena in magnetorheological elastomers. International Journal of Modern Physics B 16: 2412–2418.

Hoang

Zhang

(2009) A dynamic absorber with a soft magnetorheological elastomer for powertrain vibration suppression. Smart Materials and Structures 18: 074009.

Jones

CJC

Thompson

Diehl

(2006) The use of decay rates to analyse the performance of railway track in rolling noise generation. Journal of Sound and Vibration 293: 485–495.

10.

Lerner

Cunefare

(2007) Performance of MRE-based vibration absorbers. Journal of Intelligent Material Systems and Structures 19: 551–563.

11.

, et al. (2013) Development and characterization of a magnetorheological elastomer based adaptive seismic isolator. Smart Materials and Structures 22: 035005.

12.

Liu

(2009) Reducing the rail component of rolling noise by vibration absorber: theoretical prediction. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 223: 473–483.

13.

Oertli

(2003) The STAIRRS project, work package 1: a cost-effectiveness analysis of railway noise reduction on a European scale. Journal of Sound and Vibration 267: 431–437.

14.

Ryue

Thompson

White

, et al. (2009) Decay rates of propagating waves in railway tracks at high frequencies. Journal of Sound and Vibration 320: 955–976.

15.

Schubert

Harrison

(2016) Magnetic induction measurements and identification of the permeability of magneto-rheological elastomers using finite element simulations. Journal of Magnetism and Magnetic Materials 404: 205–214.

16.

Sun

Chen

Yang

, et al. (2014) The development of an adaptive tuned magnetorheological elastomer absorber working in squeeze mode. Smart Materials and Structures 23: 075009.

17.

Sun

Deng

Yang

, et al. (2015a) An adaptive tuned vibration absorber based on multilayered MR elastomers. Smart Materials and Structures 24: 045045.

18.

Sun

Yang

, et al. (2015b) Development of a novel variable stiffness and damping magnetorheological fluid damper. Smart Materials and Structures 24: 085021.

19.

Talotte

Gautier

Thompson

, et al. (2003) Identification, modelling and reduction potential of railway noise sources: a critical survey. Journal of Sound and Vibration 267: 447–468.

20.

Thompson

Gautier

(2006) Review of research into wheel/rail rolling noise reduction. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 220: 385–408.

21.

Thompson

Jones

CJC

(2000) A review of the modelling of wheel/rail noise generation. Journal of Sound and Vibration 231: 519–536.

22.

Thompson

Jones

CJC

Waters

, et al. (2007) A tuned damping device for reducing noise from railway track. Applied Acoustics 68: 43–57.

23.

Thompson

Jones

CJC

, et al. (1999) The influence of the non-linear stiffness behaviour of rail pads on the track component of rolling noise. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 213: 233–241.

24.

(2008) On the railway track dynamics with rail vibration absorber for noise reduction. Journal of Sound and Vibration 309: 739–755.

25.

Yang

, et al. (2015) A new magnetorheological elastomer isolator in shear–compression mixed mode. Journal of Intelligent Material Systems and Structures 26: 1290–1300.