Synthesis and characterization of novel flake-shaped carbonyl iron and water-based magnetorheological fluids using laponite and oleic acid with enhanced sedimentation stability
Restricted accessResearch articleFirst published online August, 2021
Synthesis and characterization of novel flake-shaped carbonyl iron and water-based magnetorheological fluids using laponite and oleic acid with enhanced sedimentation stability
In this study, micron-sized flake shaped carbonyl iron (CI) water-based MR fluids were prepared with adding laponite and oleic acid as an additive and surfactant, respectively. The MR suspensions are comprised of the fixed CI particles and water weight %, while weight % of laponite and oleic acid changes from 1 to 3 wt% and 0.5 to 1.5 wt%, respectively. The remarkable enhancement in magnetorheological properties was obtained with improved sedimentation stability for CI/water MR suspensions with the addition of laponite and oleic acid. It was found that at the lowest magnetic field strength, the higher laponite concentration is effective, while at the highest magnetic field strength, the smaller concentration was effective. It was because of the combined effect of the field-induced CI chains and the laponite clay gel network. Its storage moduli showed a stable plateau area for whole angular frequencies, suggesting distinguished solid-like behavior of the MR fluid. Finally, a novel correlation was obtained between the initial settling rate of the CI particles and magnetorheological behavior of CI/laponite/OA MR suspensions with 1 wt% laponite and 0.5 wt% oleic acid, which has less zero-field, high on-state shear stress with enhanced sedimentation stability. The prepared MR fluids are a reliable industrial application vibration-isolation, clutch, and brake.
BicaDVekasLAvdeevM V, et al. (2007) Sterically stabilized water based magnetic fluids: Synthesis, structure and properties. Journal of Magnetism and Magnetic Materials311: 17–21.
2.
BrunierBSheibat-OthmanNChniguirM, et al. (2016) Investigation of four different laponite clays as stabilizers in pickering emulsion polymerization. Langmuir32: 6046–6057.
3.
CarlsonJDJollyMR (2000) MR fluid, foam and elastomer devices. Mechatronics10: 15.
4.
ChenBHuangDLiC, et al. (2019) Design and modeling for 2D plate type MR damper. Frontiers in Materials6: 2296–8016.
5.
ChengHBWangJMMaHR, et al. (2008) Stability and anti-oxidization of aqueous MR fluids improved by modifying iron particle surface with organic molecule. Wuli Huaxue Xuebao/Acta Physico – Chimica Sinica24: 1869–1874.
6.
ChinBDParkJHKwonMH, et al. (2001) Rheological properties and dispersion stability of magnetorheological (MR) suspensions. Rheologica Acta40: 211–219.
7.
ChuahWHZhangWLChoiHJ, et al. (2015) Magnetorheology of core-shell structured carbonyl iron/polystyrene foam microparticles suspension with enhanced stability. Macromolecules48: 7311–7319.
8.
De VicenteJKlingenbergDJHidalgo-AlvarezR (2011) Magnetorheological fluids: A review. Soft Matter7: 3701–3710.
9.
De VicenteJLópez-LópezMTDuránJDG, et al. (2005) A slender-body micromechanical model for viscoelasticity of magnetic colloids: Comparison with preliminary experimental data. Journal of Colloid and Interface Science282: 193–201.
10.
De VicenteJLópez-LópezMTGonzález-CaballeroF, et al. (2003) Rheological study of the stabilization of magnetizable colloidal suspensions by addition of silica nanoparticles. Journal of Rheology47: 1093–1109.
11.
De VicenteJVeredaFSegovia-GutiérrezJP, et al. (2010) Effect of particle shape in magnetorheology. Journal of Rheology54: 1337–1362.
12.
DorostiAHGhateeMNorouziM (2020) Preparation and characterization of water-based magnetorheological fluid using wormlike surfactant micelles. Journal of Magnetism and Magnetic Materials498: 166193.
13.
DykeSJSpencerBFJrSainMK, et al. (1996) Modeling and control of magnetorheological dampers for seismic response reduction. Smart Materials and Structures5: 565.
14.
EspínMJDelgadoAVMartinJE (2004) Effects of electric fields and volume fraction on the rheology of hematite/silicone oil suspensions. Rheologica Acta44: 71–79.
15.
GencSPhulePP (2002) Rheological properties of magnetorheological fluids. Smart Materials and Structures140: 140–146.
16.
GhaffariAHashemabadiSHAshtianiM (2014) A review on the simulation and modeling of magnetorheological fluids. Journal of Intelligent Material Systems and Structures26: 881–904.
17.
GinderJMDavisLCElieLD (1996) Rheology of magnetorheological fluids: Models and measurements. International Journal of Modern Physics B10: 3293–3303.
18.
GinderJMNicholsMEElieLD, et al. (1999) Magnetorheological elastomers: Properties and applications. In: Smart structures and materials 1999: Smart materials technologies, vol. 3675, Newport Beach, CA, United States, pp. 131–138. International Society for Optics and Photonics.
19.
HatoMJChoiHJSimHH, et al. (2011) Magnetic carbonyl iron suspension with organoclay additive and its magnetorheological properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects377: 103–109.
20.
JangDSLiuYDKimJH, et al. (2015) Enhanced magnetorheology of soft magnetic carbonyl iron suspension with hard magnetic γ-Fe2O3 nanoparticle additive. Colloid and Polymer Science293: 641–647.
21.
JatavSJoshiYM (2014) Applied clay science chemical stability of laponite in aqueous media. Applied Clay Science98: 72–77.
22.
JohnSYooJHWereleyNM, et al. (2002) Magnetorheological fluids exploiting nanometer-sized particles. In: Smart structures and materials 2002: Active materials: Behavior and mechanics, vol. 4699, San Diego, California, United States, pp. 473–484.
23.
JollyMRBenderJWCarlsonJD (1999) Properties and applications of commercial magnetorheological fluids. Journal of Intelligent Material Systems and Structures10: 5–13.
24.
KimMWHanWJKimYH, et al. (2016) Effect of a hard magnetic particle additive on rheological characteristics of microspherical carbonyl iron-based magnetorheological fluid. Colloids and Surfaces A: Physicochemical and Engineering Aspects506: 812–820.
25.
KimYJLiuYDSeoY, et al. (2013) Pickering-emulsion-polymerized polystyrene/Fe2O3 composite particles and their magnetoresponsive characteristics. Langmuir29: 4959–4965.
26.
KlingenbergDJZukoskiCFIV (1990) Studies on the steady-shear behavior of electrorheological suspensions. Langmuir6: 15–24.
27.
KordonskiWIGoliniDHoganS, et al. (1999) System for abrasive jet shaping and polishing of a surface using magnetorheological fluid. U.S. Patent 5: 971,835.
28.
KwonSHJungHSChoiHJ, et al. (2018) Effect of octahedral typed iron oxide particles on magnetorheological behavior of carbonyl iron dispersion. Colloids and Surfaces A: Physicochemical and Engineering Aspects555: 685–690.
29.
LaunHMKormannCWillenbacherN (1996) Rheometry on magnetorheological (MR) fluids: I. Steady shear flow in stationary magnetic fields. Rheologica Acta35: 417–432.
30.
LeeJYKwonSHChoiHJ (2019) Magnetorheological characteristics of carbonyl iron microparticles with different shapes. Korea-Australia Rheology Journal31: 41–47.
31.
LeeSNLeeJIKimYJ, et al. (2007) Low-loss thin film microstrip lines and filters based on magnetorheological finishing. IEEE Transactions on Components and Packaging Technologies30: 849–854.
32.
LeongSANSaminPMIdrisA, et al. (2016) Synthesis, characterization and magnetorheological properties of carbonyl iron suspension with superparamagnetic nanoparticles as an additive. Smart Materials and Structure25: 025025.
33.
LiWHYaoGZChenG, et al. (2000) Testing and steady state modeling of a linear MR damper under sinusoidal. Smart Materials and Structures9: 95–102.
34.
LimSTChoMSJangIB, et al. (2004) Magnetorheological characterization of carbonyl iron based suspension stabilized by fumed silica. Journal of Magnetism and Magnetic Materials282: 170–173.
35.
López-LópezMTDe VicenteJGonzález-CaballeroF, et al. (2005) Stability of magnetizable colloidal suspensions by addition of oleic acid and silica nanoparticles. Colloids and Surfaces A: Physicochemical and Engineering Aspects264: 75–81.
36.
López-LópezMTGomez-RamirezADuránJD, et al. (2008) Preparation and characterization of iron-based magnetorheological fluids stabilized by addition of organoclay particles. Langmuir: The ACS Journal of Surfaces and Colloids24: 7076–7084.
37.
López-LópezMTKuzhirPDuránJD, et al. (2010) Normal stresses in a shear flow of magnetorheological suspensions: Viscoelastic versus Maxwell stresses. Journal of Rheology54: 1119–1136.
38.
López-LópezMTZugaldíaAGonzález-CaballeroF, et al. (2006) Sedimentation and redispersion phenomena in iron-based magnetorheological fluids. Journal of Rheology50: 543–560.
39.
Martínez-PedreroFTirado-MirandaMSchmittA, et al. (2007) Structure and stability of aggregates formed by electrical double-layered magnetic particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects306: 158–165.
40.
MauryaCSSarkarC (2020) Magnetic and transient temperature field simulation of plate–plate magnetorheometer using finite-element method. IEEE Transactions on Magnetics56: 1–9.
41.
MazlanSAEkreemNBOlabiAG (2008) Apparent stress-strain relationships in experimental equipment where magnetorheological fluids operate under compression mode. Journal of Physics D: Applied Physics41: 1–12.
42.
NgatuGTWereleyNM (2007) Viscometric and sedimentation characterization of bidisperse magnetorheological fluids. IEEE Transactions on Magnetics43: 2474–2476.
43.
NgatuGTWereleyNMKarliJO, et al. (2008) Dimorphic magnetorheological fluids: Exploiting partial substitution of microspheres by nanowires. Smart Materials and Structures17: 045022.
44.
PadalkaOSongHJWereleyNM, et al. (2010) Stiffness and damping in Fe, Co, and Ni nanowire-based magnetorheological elastomeric composites. IEEE Transactions on Magnetics46: 2275–2277.
45.
ParkBJFangFFChoiHJ (2010) Magnetorheology: Materials and application. Soft Matter6: 5246–5253.
46.
PhuléPPGinderJM (1999) Synthesis and properties of novel magnetorheological fluids having improved stability and redispersibility. International Journal of Modern Physics B13: 2019–2027.
47.
PuHTJiangFJYangZ, et al. (2006) Effects of polyvinylpyrrolidone and carbon nanotubes on magnetorheological properties of iron-based magnetorheological fluids. Journal of Applied Polymer Science102: 1653–1657.
48.
RabinowJ (1948) The magnetic fluid clutch. IEEE Transactions on Magnetics67: 1308–1315.
49.
RankinPJHorvathATKlingenbergDJ (1999) Magnetorheology in viscoplastic media. Rheologica Acta38: 471–477.
50.
RichJPDoylePSMcKinleyGH (2012) Magnetorheology in an aging, yield stress matrix fluid. Rheologica Acta51: 579–593.
51.
RichJPLammerdingJMcKinleyGH, et al. (2011) Nonlinear microrheology of an aging, yield stress fluid using magnetic tweezers. Soft Matter7: 9933–9943.
52.
RosenfeldNWereleyNMRadakrishnanR, et al. (2002) Behavior of magnetorheological fluids utilizing nanopowder iron. International Journal of Modern Physics B16: 2392–2398.
53.
ShahKSeongMSUpadhyayRV, et al. (2014) A low sedimentation magnetorheological fluid based on plate-like iron particles, and verification using a damper test. Smart Materials and Structures23: 027001.
54.
ShenRShafrirSNMiaoC, et al. (2010) Synthesis and corrosion study of zirconia-coated carbonyl iron particles. Journal of Colloid and Interface Science342: 49–56.
55.
SpencerBJrDykeSJSainMK, et al. (1997) Phenomenological model for magnetorheological dampers. Journal of Engineering Mechanics123: 230–238.
56.
TurczynRKciukM (2008) Preparation and study of model magnetorheological fluids. Journal of Achievements in Materials and Manufacturing Engineering27: 131–134.
57.
UlicnyJCSnavelyKSGoldenMA, et al. (2010) Enhancing magnetorheology with nonmagnetizable particles. Applied Physics Letters96: 231903.
58.
UpadhyayRVLaherishethZShahK (2014) Rheological properties of soft magnetic flake shaped iron particle based magnetorheological fluid in dynamic mode. Smart Materials and Structures23: 015002.
59.
VeredaFDe VicenteJSegovia-GutierrezJP, et al. (2011) On the effect of particle porosity and roughness in magnetorheology. Journal of Applied Physics100: 063520.
60.
WangGMaYDongX, et al. (2015) Facile synthesis and magnetorheological properties of superparamagnetic CoFe2O4/GO nanocomposites. Applied Surface Science357: 2131–2135.
61.
WangGMaYTongY, et al. (2017) Development of manganese ferrite/graphene oxide nanocomposites for magnetorheological fluid with enhanced sedimentation stability. Journal of Industrial and Engineering Chemistry48: 142–150.
62.
WangGZhaoDLiN, et al. (2019) Facile synthesis of hierarchically structured flower-like Fe3O4 microspheres for high-performance magnetorheological fluids. Journal of Industrial and Engineering Chemistry79: 217–225.
63.
WereleyNMChaudhuriAYooJH, et al. (2006) Bidisperse magnetorheological fluids using Fe particles at nanometer and micron scale. Journal of Intelligent Material Systems and Structures17: 393–401.
64.
WilsonMJFuchsAGordaninejadF (2002) Development and characterization of magnetorheological polymer gels. Journal of Applied Polymer Science84: 2733–2742.
65.
YangJYanHHuZ, et al. (2016) Viscosity and sedimentation behaviors of the magnetorheological suspensions with oleic acid/dimer acid as surfactants. Journal of Magnetism and Magnetic Materials417: 214–221.
66.
YangPYuMLuoH, et al. (2017) Improved rheological properties of dimorphic magnetorheological gels based on flower-like carbonyl iron particles. Applied Surface Science416: 772–780.
