Electromechanical model and simple numerical analysis for a piezoelectric vibration energy harvester considering nonlinear piezoelectricity,nonlinear damping,and self-powered synchronized switch circuit

Establishment of an analytical technique that considers nonlinear piezoelectricity, nonlinear damping, and the connections to the self-powered synchronized switch circuit represents a challenging but practical issue in the development of piezoelectric vibration energy harvesters. The two-way coupled analysis method, which combines numerical software with a circuit simulator, can simulate the performance of the harvester, but it imposes a high computational load. We develop a numerical analysis technique that is more readily implemented to allow us to produce accurate predictions of the output power, displacement, and frequency response characteristics of this harvester with the switch circuit. First, we derive the electromechanical equation required for the miniature harvester, and we then determine the parameters in this equation using the harmonic balance method. Finally, the governing equation coupling the piezoelectric vibration energy harvester with the self-powered synchronized switch circuit is simplified, taking the form of a quartic equation with respect to the displacement. The simulation replicated a reduction in the displacement at higher resistive loads, wider variations in the resonance frequency, and the nonlinear stiffness softening characteristics that were observed experimentally. This paper provides a practical method for predicting the performance of the nonlinear piezoelectric vibration energy harvester with the synchronized switch circuit.