Design of Shape Memory Alloy Actuators

Abstract

This paper describes the design of shape memory alloy force and displacement actuators based upon the thermomechanical constitutive relations previously developed by the authors. Numerical simulations and design case studies are presented which show the utility and advantages of this method over design methods currently being used. The types of actuators described and analyzed include bias spring actuators, differential force actuators, and their hybrid systems. The design approach includes coupling between the one-dimensional thermomechanical constitutive relations and a lumped capacitance transient thermal analysis. The design approach described herein will provide a practical and convenient method for use in the design of shape memory alloy actuators.

Get full access to this article

View all access options for this article.

References

1987. Biometal Company, Biometal, Tokyo, Japan.

Buehler, W. J. and R. C. Wiley. 1965. Nickel-Based Alloys, U.S. Patent 3,174,851.

Duerig, T. W. and K. N. Melton . 1989. "Design with the Shape Memory Effect", Shape Memory Materials, Materials Research Society. Pittsburgh, PA, Proc. of MRS int'l. Mtg. on Adv. Mats., June, 1988. pp. 581-597.

Dye, E. T. 1990. "An Experimental Investigation of the Behavior of Nitinol", Master's thesis, Department of Mechanical Engineering. Virginia Polytechnic Institute and State University, Blacksburg, VA.

Funakubo, K. 1984. Shape Memory Alloy. Gordon and Breach Science Publishers.

Furuya. Y. , H. Shimada . Y. Goto and R. Honda . 1989. "An Extreme Operation Submarine Robot Actuator by Shape Memory Alloy"' Shape VMemory Materials, Materials Research Society, Pittsburgh, PA. Proc. of AIRS Int'l. Mtg. on Adv. Mats., June, 1988, Japan, pp. 599-604.

Hodgson, D. E. 1988. Using Shape Memory Alloys. Shape Memory Applications, Inc.

Jackson, C. M., H. J. Wagner and R. J. Wasilewski. 1972. "55-Nitinol-The Alloy with a Memory: Its Physical Metallurgy. Properties. and Applications", Technical Report SP-51 10, NASA.

Liang, C. 1990. "The Constitutive Modeling of Shape Memory Alloys", Ph.D. dissertation, Virginia Polytechnic Institute and State University. Blacksburg, VA.

10.

Liang, C. and C. A. Rogers . 1990. "One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials". Journal of Intelligent Material Systems and Structure, 2(1).

11.

Liang, C. and S. C. Rogers . 1991. "The Multi-Dimensional Constitutive Relations of Shape Memory Alloys". Proceedings of AIAA ASME/ ASCE/AHS/ASC 32nd Structures, Structural Dynamics, and Materials Conference, AIAA-91-1 165-CP, Baltimore, April 8-10. 1991.

12.

Perkins, J. 1975. Shape Memory Effects in Alloys. New York: Plenum Press.

13.

Tanaka, Y. 1986. "A Thermomechanical Sketch of Shape Memory Effects: One-Dimensional Tensile Behavior", Res. Mechanica, 18:251-263.

14.

Tanaka, Y. and 0. Nagaki . 1982. "A Thermomechanical Description of Materials with Internal Variables in the Process of Phase Transitions", Ingenieur-Archiv., 51:287-299.

15.

Wayman, C. M. 1980. "Some Applications of Shape-Memory Alloys", Journal of Aletals.

16.

Wayman, C. M. and K. Shimizu . 1972. "The Shape Memory Effect in Alloys", Metal Science Journal, 6:175-175.