Computational modeling of shear deformation and failure of nanoscale hydrated calcium silicate hydrate in cement paste: Calcium silicate hydrate Jennite

Abstract

Calcium silicate hydrate Jennite is a molecular structure commonly accepted as a representation of the complex calcium silicate hydrate gel formed during the hydration of typical Portland cement. In this paper, the behavior of nanoscale calcium silicate hydrate Jennite under shear deformation was investigated using molecular dynamics simulations. Computational samples representing the nanoscale structure of calcium silicate hydrate Jennite were subjected to shear deformation in order to investigate not only their mechanical properties but also their deformation behavior. The simulation results indicated that the nanoscale calcium silicate hydrate Jennite under shear deformation displays a linear elastic behavior up to shear stress of approximately 1.0 GPa, and shear deformation of about 0.08 radians, after which point yielding and plastic deformation occurs. The shear modulus determined from the simulations was 11.2 ± 0.7 GPa. The deformation-induced displacements in molecular structures were analyzed dividing the system in regions representing calcium oxide layers. The displacement/deformation of the layers of calcium oxide forming the structure of nanoscale calcium silicate hydrate Jennite was analyzed. The non-linear stress–strain behavior in the molecular structure was attributed to a non-linear increase in the displacement due to sliding of the calcium oxide layers on top of each other with higher shearing. These results support the idea that by controlling the chemical reactions, the tailored morphologies can be used to increase the interlinking between the calcium oxide layers, thus minimizing the shearing of the layers and leading to molecular structures that can withstand larger deformation and have improved failure behavior.

Keywords

Material chemistry level modeling cement molecular dynamics multi-scale modeling deformation and failure calcium silicate hydrate

Get full access to this article

View all access options for this article.

References

Al-Ostaz

Cheng

AH-D

(2010) A molecular dynamics and microporomechanics study on the mechanical properties of major constituents of hydrated cement. Composites Part B: Engineering 41(7): 543–549.

Bentz DP (June, 2005) CEMHYD3D: A Three-Dimensional Cement Hydration and Microstructure Development Modeling Package. Version 3.0. National Institute of Standards and Technology. Internal Report 7232. Technology Administration, U.S. Department of Commerce.

Bernard

Ulm

F-J

Lemarchand

(2003) A multiscale micromechanics-hydration model for the early-age elastic properties of cement-based materials. Cement and Concrete Research 33(9): 1293–1309.

Bonaccorsi

Merlino

Taylor

HFW

(2004) The crystal structure of jennite, Ca9Si6O18(OH)6·8H2O. Cement and Concrete Research 34(9): 1481–1488.

Chandler

Peters

Pelessone

(2010) Modeling nanoindentation of calcium silicate hydrate. Transportation Research Record(214267–74.

Chandler MQ, Peters JF and Pelessone D (2012) Modeling Nanomechanical Behavior of Calcium-Silicate-Hydrate. U.S.A. ERDC Editor: Vicksburg, MS.

Chandler

Peters

Pelessone

(2013) Discrete element modeling of calcium-silicate-hydrate. Modelling and Simulation in Materials Science and Engineering 21(5): . DOI: 10.1088/0965-0393/21/5/055010.

Chen

Sorelli

Vandamme

(2010) A coupled nanoindentation/SEM-EDS study on low water/cement ratio Portland cement paste: Evidence for C-S-H/Ca(OH)(2) nanocomposites. Journal of the American Ceramic Society 93(5): 1484–1493.

Garboczi EJ and Bentz DP (October, 1996) Multi-Scale Picture of Concrete and its Transport Properties: Introduction for Non-Cement Researchers. National Institute of Standards and Technology Internal Report 5900. Technology Administration, U.S. Department of Commerce.

10.

Girão

Richardson

Porteneuve

(2007) Morphology and nanostructure C–S–H in white Portland cement–fly ash hydrated at 85℃. Advances in Applied Ceramics 106(6): 283–293.

11.

Haecker

Garboczi

Bullard

(2005) Modeling the linear elastic properties of Portland cement paste. Cement and Concrete Research 35(10): 1948–1960.

12.

Hunashyal

Tippa

Quadri

(2011) Experimental investigation on effect of carbon nanotubes and carbon fibres on the behavior of plain cement mortar composite round bars under direct tension. ISRN Nanotechnology 2011: 1–6.

13.

Jennings HM, Jeffrey JT, Gevrenov JS, et al. (2005) Relating the nanostructure of concrete to engineering properties. In: 2nd International symposium on nanotechnology in construction. Bilbao, Spain, 13–16 November 2005.

14.

Lee

Willam

(2009) A multiscale model for modulus of elasticity of concrete at high temperatures. Cement and Concrete Research 39(9): 754–762.

15.

Manzano

Dolado

Ayuela

(2009) Elastic properties of the main species present in Portland cement pastes. Acta Materialia 57(5): 1666–1674.

16.

Manzano

Dolado

Guerrero

(2007) Mechanical properties of crystalline calcium-silicate-hydrates: comparison with cementitious C-S-H gels. Physica Status Solidi (a) 204(6): 1775–1780.

17.

Manzano

Masoero

Arbeloa-LI (2013) Shear deformations in calcium silicate hydrates. Soft Matter 9(30): 7333–7341.

18.

Mehta

Monteiro

PJM

(2006) Concrete: Microstructure, Properties, and Materials, 3rd ed. New York: McGraw-Hill.

19.

Murray

Subramani

Selvam

(2010) Molecular dynamics to understand the mechanical behavior of cement paste. Transportation Research Record 2142: 75–82.

20.

Pellenq RJ, Kushima K, Shahsavari R, et al. (2009) A realistic molecular model of cement hydrates. Proceedings of the National Acadamey of Sciences of the United States of America 106(38): 16102–16107.

21.

Powers

Brownyard

(1948) Studies of the Physical Properties of Hardened Portland Cement Paste: [In Nine Parts], Chicago: Portland Cement Association, Research Laboratories. Bulletin 22, pp. 101–992.

22.

Prince

Jemimah

(2011) Effect of nano–fly ash on strength of concrete. International Journal of Civil & Structural Engineering 2(2): 475–482.

23.

Richardson

(2002) Electron microscopy of cements. In: Barnes

Bensted

(eds) Structure and Performance of Cements, London: Spon Press, pp. 500–556.

24.

Richardson

(2004) Tobermorite/jennite- and tobermorite/calcium hydroxide-based models for the structure of C-S-H: Applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaolin, or silica fume. Cement and Concrete Research 34(9): 1733–1777.

25.

Richardson

(2008) The calcium silicate hydrates. Cement and Concrete Research 38(2): 137–158.

26.

Richardson

Groves

(1992) Models for the composition and structure of calcium silicate hydrate (C-S-H) gel in hardened tricalcium silicate pastes. Cement and Concrete Research 22(6): 1001–1010.

27.

Šmilauer

Bittnar

(2006) Microstructure-based micromechanical prediction of elastic properties in hydrating cement paste. Cement and Concrete Research 36(9): 1708–1718.

28.

Shahzamanian

Tadepalli

Rajendran

(2014) Representative volume element based modeling of cementitious materials. Journal of Engineering Materials and Technology-Transactions of the ASME 136(1): . DOI: 10.1115/1.4025916.

29.

Sun

(1998) COMPASS: An ab initio force-field optimized for condensed-phase applications – Overview with details on alkane and benzene compounds. Journal of Physical Chemistry B 102(38): 7338–7364.

30.

Taylor

HFW

(1997) Cement Chemistry, 2nd ed. London: T. Telford.

31.

Taylor

Richardson

Brydson

RMD

(2007) Nature of C–S–H in 20 year old neat ordinary Portland cement and 10% Portland cement–90% ground granulated blast furnace slag pastes. Advances in Applied Ceramics 106(6): 294–301.

32.

Taylor

Richardson

Brydson

RMD

(2010) Composition and microstructure of 20-year-old ordinary Portland cement–ground granulated blast-furnace slag blends containing 0 to 100% slag. Cement and Concrete Research 40(7): 971–983.

33.

Ulm

F-J

Pellenq

RJ-M

Vandamme

(2010) Concrete: From atoms to concrete structures. In: Bićanić

(eds) Computational Modelling of Concrete Structures, Leiden, The Netherlands: CRC Press/Balkema, pp. 69–74.

34.

Wang

Han

Pan

(2013) Mechanical and morphological properties of highly dispersed carbon nanotubes reinforced cement based materials. Journal of Wuhan University of Technology-Mater. Sci. Ed 28(1): 82–87.

35.

Ostaz-Al

Cheng

AH-D

(2010) Concrete as a hierarchical structural composite material. International Journal for Multiscale Computational Engineering 8(6): 585–595.

36.

Ostaz-Al

Cheng

(2011) Computation of elastic properties of Portland cement using molecular dynamics. Journal of Nanomechanics and Micromechanics 1(2): 84–90.

37.

Yazdanbakhsh

Zachary

Bryan

(2012) Challenges and benefits of utilizing carbon nanofilaments in cementitious materials. Journal of Nanomaterials 2012: 1–8.