This study explores the effects of strain rate on the irreversible deformation and damage evolution in carbon fiber reinforced polymers (CFRPs) during dynamic tensile loading. Experiments conducted on T700/M21 CFRP specimens at varying strain rates (10−4 to 1 m.s−1) indicate that macroscopic irreversible deformation is invariant with strain rate, while viscoelasticity significantly influences the material’s nonlinear behavior. By differentiating between reversible and irreversible strains, we find that damage accumulation does not exhibit a clear strain rate dependency, contrary to some existing literature. This work emphasizes the need for advanced analysis techniques beyond macroscopic observations to fully understand the complex, rate-dependent mechanisms governing CFRP behavior under dynamic conditions.
AITM-1-0002 (1998) AITM 1-0002 determination of in-plane shear properties (+/− 45 tensile test).
Toulouse:
Airbus Industrie Engineering Directorate.
2.
BattamsGDulieu-BartonJ (2016)
Data rich characterisation of damage propagation in composite materials. Composites Part A: Applied Science and Manufacturing91: 420– 435.
3.
BertheJChaibiSPortemontG, et al. (2023)
High-speed infrared thermography for in-situ damage monitoring during impact test. Composite Structures314: 116934.
4.
BertheJRagonetM (2018)
Passive infrared thermography measurement of transverse cracking evolution in cross-ply laminates. Strain54(6): e12293.
5.
BertonJ (2022) Effets de la vitesse de sollicitation sur le comportement irréversible de composites à matrice organique. PhD Thesis. Thèse de doctorat dirigée par Deletombe, Éric et Brieu, Mathias Mécanique des solides, des matériaux, des structures et des surfaces Centrale Lille Institut 2022.
6.
BertonJCoussaFBertheJ, et al. (2022a)
Definition of specimen geometry to characterize CFRP non linear shear behavior in dynamic loading. Composites Communications30: 101096.
7.
BertonJCoussaFBertheJ, et al. (2022b)
Experimental protocol for nonlinear behavior characterization of CFRP materials under dynamic loadings. Physical Sciences Forum4(1): 6.
8.
CastresMBertheJDeletombeE, et al. (2017)
Experimental evaluation of the elastic limit of carbon-fibre reinforced epoxy composites under a large range of strain rate and temperature conditions. Strain53(6): e12248.
9.
CoussaF (2017) Du comportement dynamique de matériaux composites tissés à matrice polyamide. PhD Thesis, Paris Sciences et Lettres.
10.
CoussaFBertheJRagonetM (2022)
Rate dependency and ply thickness influence on transverse cracking evolution in cross-ply laminates. Journal of Theoretical, Computational and Applied Mechanics May 5, 2022. https://doi.org/10.46298/jtcam.7062
11.
CoussaFRenardJJoannesS, et al. (2017)
A consistent experimental protocol for the strain rate characterization of thermoplastic fabrics. Strain53(3): e12220.
12.
DIN-EN-ISO-14129 (1997) Determination of the in-Plane Shear Stress/Shear Strain Response, Including the in-Plane Shear Modulus and Strength, by the 45 Tension Test Method.
Brussels:
European Committee for Standardization.
13.
DongfangMDanianCShanxingW, et al. (2010)
An interrupted tensile testing at high strain rates for pure copper bars. Journal of Applied Physics108(11): 114902.
14.
EssaYESLópez-PuenteJPérez-CastellanosJL (2007)
Numerical simulation and experimental study of a mechanism for Hopkinson bar test interruption. The Journal of Strain Analysis for Engineering Design42(3): 163–172.
15.
FitoussiJMeraghniFJendliZ, et al. (2005)
Experimental methodology for high strain-rates tensile behaviour analysis of polymer matrix composites. Composites Science and Technology65(14): 2174–2188.
16.
LadèvezePLubineauG (2002)
An enhanced mesomodel for laminates based on micromechanics. Composites Science and Technology62(4): 533–541.
17.
LatailladeJDelaetMCollombetF, et al. (1996)
Effects of the intralaminar shear loading rate on the damage of multi-ply composites. International Journal of Impact Engineering18(6): 679–699.
18.
LemaitreJ (1985)
A continuous damage mechanics model for ductile fracture. Journal of Engineering Materials and Technology107(1): 83–89.
19.
LemaitreJChabocheJ (1985) Mécanique Des Matériaux Solides.
Malakoff:
Dunod.
20.
ParrySFletcherLPierronF (2021)
The off-axis IBII test for composites. Journal of Dynamic Behavior of Materials7(1): 127–155.
21.
PearsonRAYeeAF (1993)
Toughening mechanisms in thermoplastic-modified epoxies: 1. modification using poly(phenylene oxide). Polymer34(17): 3658–3670.
22.
Pernas-Sánchez J, et al., DAMAGE INCEPTION OF COMPOSITE UNDER DYNAMIC LOADINGS, 11 th International Conference on Composites Testing and Model Identification, Girona, 2023. https://dugi-doc.udg.edu/handle/10256/23689
23.
PipesRBPaganoN (1970)
Interlaminar stresses in composite laminates under uniform axial extension. Journal of Composite Materials4(4): 538–548.
24.
PotterK (2002)
Bias extension measurements on cross-plied unidirectional prepreg. Composites Part A: Applied Science and Manufacturing33(1): 63–73.
25.
RackALukićBChapmanDJ, et al. (2024)
Dynamic loading platforms coupled to ultra-high speed x-ray imaging at beamline id19 of the European synchrotron ESRF. High Pressure Research44(3): 400–417.
26.
RosenBW (1972)
A simple procedure for experimental determination of the longitudinal shear modulus of unidirectional composites. Journal of Composite Materials6(4): 552–554.
27.
Miranda-Guede AtmacR (1998)
Analytical and experimental evaluation of nonlinear viscoelastic-viscoplastic composite laminates under creep, creep-recovery, relaxation and ramp loading. Mechanics of Time-Dependent Materials2: 113–128.
28.
SchaperyRA (1969)
On the characterization of nonlinear viscoelastic materials. Polymer Engineering & Science9(4): 295–310.
29.
SongPChapmanDJGrahamAM, et al. (2024)
Thermomechanical characterisation of a thermoplastic polymer and its short glass fibre reinforced composite: Influence of fibre, fibre orientation, strain rates and temperatures. Composites Part A: Applied Science and Manufacturing180: 108099.
30.
SunXSoryDLiuK, et al. (2024)
Effect of temperature on high strain-rate damage evolving in CFRP studied by synchrotron-based mhz X-ray phase contrast imaging. Composites Part B: Engineering279: 111445.
31.
TilbrookDBlairDBoyleM, et al. (2010)
Composite materials with blend of thermoplastic particles. US Patent7: 322, 754.
32.
WiegandJ (2009) Constitutive modelling of composite materials under impact loading. PhD Thesis, Oxford University, UK.
33.
WisnomMR (1995)
The effect of fibre rotation in tension tests on measured shear properties. Composites26(1): 25–32.
34.
YangXXiongXYinZ, et al. (2014)
Interrupted test of advanced high strength steel with tensile split Hopkinson bar method. Experimental Mechanics54(4): 641–652.
