Experimental Damage Investigation of a SiC-Ti Aluminide Metal Matrix Composite

Abstract

Experimental investigations and procedures for the determination of damage are presented for the macro- and micro-analysis of SiC-Titanium Aluminide metal matrix composite (MMC). Uniaxial tension tests are performed on laminate specimens of two different layups. The layups are balanced symmetrically and given as (0/90)_s and (±45)_s, each containing four plies. Dogbone shaped flat plate specimens are fabricated from each of the layups. Specimens for the different layups are loaded to various load levels ranging from rupture load down to 70% of the rupture load at room temperature. By loading specimens to various load levels damage evolution is experimentally evaluated through a quantitative micro-analysis technique. Micro-analysis is performed using scanning electron microscopy (SEM) on three mutually perpendicular representative cross sections of all specimens for the qualitative and quantitative determination of damage. Together these representative cross sections form a representative volume element (RVE) defined for the theoretical development of damage evolution. Results from the micro-analysis are used in evaluating the damage parameters defined in a previously developed damage theory [1]. This theory uses a second order damage tensor of which it is proposed will have non-zero off diagonal terms only if the load applied to the laminate is in a direction other than parallel to the fibers. Damage parameters are evaluated for each of the load levels below the rupture load, since damage features present at this load level are beyond the range of valid damage mechanics. Two types of damage evaluations are performed for the RVE, one for the overall quantification of damage and the other quantifying damage in the matrix and fibers separately. Damage as a result of delamination is excluded in this investigation for both types of damage evaluation, but may be included if needed. The damage curves presented show graphically a consistent evolution of damage, which validates the methods used in evaluating the damage parameter. Curves for the different laminate layups show that damage profile curves are similar for different laminate layups and orientations. The off diagonal terms of the damage tensors as evaluated by the proposed scheme are found to be significant and should be included in any constitutive damage relation. Numerical verification of these observations are to be presented in a subsequent paper.

Get full access to this article

View all access options for this article.

References

1. Voyiadjis, G. Z. and P. I. Kattan . 1993. "Micromechanical Characterization of Damage-Plastic in Metal Matrix Composites." In George Z. Voyiadjis , ed., Studies in Applied Mechanics: Damage in Composite Materials, Vol. 34, pp. 67-102, Elsevier Science.

2. Lemaitre, J. 1985. "A Continuous Damage Mechanics Model for Ductile Fracture," J. Eng. Mater. Tech., January, 107:83-89.

3. Chaboche, J. L. 1988. "Continuum Damage Mechanics: Part I-General Concepts," J. Appl. Mech., March, 55:59-64.

4. Chaboche, J. L. 1988. "Continuum Damage Mechanics: Part 11-Damage Growth, Crack Initiation, and Crack Growth," J. Appl. Mech., March, 55:65-72.

5. Dvorak, G. J. , Y. A. Bahei-El-Din and L. C. Bank . 1989. "Fracture of Fibrous Metal Matrix Composites—I. Experimental Results," Eng. Frac. Mech., 34(1):87-104.

6. Bahei-El-Din, Y. A. , G. J. Dvorak and J.-F. Wu . 1989. "Fracture of Fibrous Metal Matrix Composites-U. Modeling and Numerical Analysis," Eng. Frac. Mech., 34(1):105-123.

7. Dvorak, G. J. 1991. "Platicity Theories for Fibrous Composite Materials," In R. K. Everett and R. J. Arsenault , eds., Metal Matrix Composites: Mechanism and Properties, Academic Press Limited. pp. 1-77.

8. Voyiadjis, G. Z. and P. I. Kattan . 1992. "A Continuum-Micromechanics Damage Model for Metal Matrix Composites," In D. Hui , T. J. Kozik and O. O. Ochoa , eds., Composite Material Technology, Vol. PD-45. ASME, PD-Vol. 45. January, pp. 83-95.

9. Voyiadjis, G. Z. and P. I. Kattan . 1991. "Ductile Fracture of Fiber-Reinforced Metal Matrix Laminates Using an Anisotropic Coupled Model of Damage and Finite-Platicity," in L. Schwer , J. N. Reddy and A. Mal , eds., Enhancing Analysis Techniques for Composite Materials, Vol. NDE-10, ASME, pp. 251-259.

10.

10. Voyiadjis, G. Z. and P. I. Kattan . 1992. "A Plasticity Damage Theory for Large Deformation of Solids, Part I: Theoretical Formulations," Inte. J. Eng. Sci., 30(9):1089-1108.

11.

11. Kattan, P. I. and G. Z. Voyiadjis . 1993. "A Plasticity Damage Theory for Large Deformation on Solids, Part II: Applications to Finite Simple Shear," Int. J. Eng. Sci., 31(1):183-199.

12.

12. Allix, O. , P. Ladeveze , D. Gilleta and R. Ohayon . 1989. "A Damage Prediction Method for Composite Structure, Int. J. Num. Meth. Eng., 27(2):271-283.

13.

13. Poursatip, A. , M. F. Ashby and P. W. R. Beaumont . 1982. "Damage Accumulation during Fatigue of Composites," In Tsuyoshi Hayashi , Kozo Kawata and Sokichi Umekawa , eds., Progress in Science and Engineering of Composites: Proceedings of the Fourth International Conference on Composite Materials, Vol. 1, Japan Society for Composite Materials, pp. 693-700.

14.

14. Ladeveze, P. , M. Poss and L. Proslier . 1982. "Damage and Fracture of Tridirectional Composites," In Tsuyoshi Hayashi , Kozo Kawata and Sokichi Umekawa , eds., Progress of Engineering of Composites: Proceedings of the Fourth International Conference on Composite Materials, Japan Society for Composite Materials, Vol. 1, pp. 649-658.

15.

15. Wang, S. S. , H. Suemasu and E. S. M. Chim . 1987. "Analysis of Fatigue Damage Evolution and Associated Anisotropic Elastic Property Degradation in Random Short-Fiber Composites," J. Composite Mater., December, 21:1084-1105.

16.

16. Majumdar, B. S. , G. M. Newaz and J. R. Ellis . 1993. "Evolution of Damage and Plasticity in Titanium-Based, Fiber-Reinforced Composites," Metall. Trans. Ser. A., July, 24A:1597-1610.

17.

17. Breunig, T. M. , S. R. Stock , J. H. Kinney , A. Guvenilir and M. C. Nichols . 1991. "Impact of X-ray Tomographic Microscopy on Deformation Studies on a SiC/Al MMC. In Material Research Society Synposium Proceedings, Materials Research Society, pp. 135-141.

18.

18. Baumann, K. J. , W. H. Kennedy and D. L. Hebert . 1984. "Computed Tomography X-ray Scanning nde of Graphite/Epoxy Coupons," J. Composite Mater., 18:537-544.

19.

19. Benci, J. E. and D. P. Pope . 1988. "Measuring Creep Damage Using Microradiography," Metall. Trans. Ser. A., April, 19A:837-847.

20.

20. Lemaitre, J. and J. Dufailly . 1987. "Damage Measurement," Eng. Frac. Mech., 28(5/6):643-661.

21.

21. Lemaitre, J. and J.-L. Chaboche . 1990. Mech. Solids Mater., pp. 69-120, 346-450, Cambridge University Press.

22.

22. Carlsson, L. A. and R. B. Pipes . 1987. Experimental Characterization of Advanced Composites Materials, Prentice-Hall, Inc.

23.

Errata: Vol. 26, No. 2 June 1986, 153-154.

24.

24. Brindley, P. K. 1987. "SiC Reinforced Aluminide Composites." In N. S. Stoloff , C. C. Koch , C. T. Liu and O. Imuzi , eds., Symposia Proc: High-Temperature Ordered Intermetallic Alloys II, Vol. 81, Materials Research Society.

25.

25. MacKay, R. A. , P. K. Brindley and F. H. Froes . 1991. "Continuous Fiber-Reinforced Titanium Aluminide Composites," J. Miner., Metals & Mater. Soc., May, 43(5):23-29.

26.

26. Viyiadjis, G. Z. and P. I. Kattan . 1993. "Damage of Fiber-Reinforced Composite Materials with Micromechanical Characterization," Int. J. Solids Struc., 30(20):2757-2778.

27.

27. Voyiadjis, G. Z. , P. I. Kattan and A. R. Venson . 1993. "Evolution of a Damage Tensor for Metal Matrix Composites," In MECAMAT 93 International Seminar on Micromechanics of Materials, Vol. 84, pp. 406-417. Moret-sur-Loing, France, July.

28.

28. Voyiadjis, G. Z. , P. I. Kattan , A. R. Venson and T. Park . 1993. "Anisotropic Damage Mechanics Modeling in Metal Matrix Composites," Technical Report, Final Report submitted to Air Force Office of Scientific Research, 141 pages.

29.

29. Voyiadjis, G. Z. and P. I. Kattan . 1993. "Local Approach to Damage in Elasto-Plastic Metal Matrix Composites," Int. J. Damage Mech., 2(1):92-114.