Dynamic Taguchi Methods and Parameter Design as Applied in Barcode Scanning and Scanners

Abstract

In this article, the dynamic Taguchi methodology is applied to the design of a barcode scanner. The concurrent engineering process involves a team of design and manufacturing engineers engaged in both hardware and software aspects of the product. The purpose of this experimental study is to determine the correlation between the outcomes of the conventional design and Taguchi optimization. The main contribution of this work in the design of scanners include: (a) application of the Taguchi methodology to yield an optimum design for scanning and comparing it to the analytical design, and (b) proving the existing opto-mechanical design to be optimum, within the signal processing capabilities. Experimental design using orthogonal arrays is established, and experiments of scanning on different barcode designs are conducted. The ideal function of the dynamic methodology is identified and the control and noise factors are chosen for the experimental design. The signal-to-noise (S/N) ratios and sensitivity are calculated using the equations of dynamic Taguchi methodology. Missing data in experiments, due to the combination of extreme ranges of design parameters, are treated by the sequential approximation method. A theoretical optimum unit is assembled and tested as confirmation of the experimental design, based on the response charts for both S/N ratio and sensitivity. The results of the confirmation experiment show that the performance of the scanner design, based on the criterion of the S/N ratios, has improved.

Keywords

Taguchi methods dynamic S/N ratios ideal function barcode scanner parameter design sequential approximation

Get full access to this article

View all access options for this article.

References

Miura, Y. and Ueno, K. (1992). NC Machining Technology Development—NC Machining for High Frequency Heat Treatment , In: Tenth Annual Taguchi Symposium, ASI, Oct. 12–14, pp. 345–352 .

Wu, Y. (1993). Robust Technology Development: Can We Reduce R&D Cycle Time to One-third?, American Supplier Institute, Technical Report.

Pack, J. , Kovch, I. , Machin, R. , Zhou, J.H. and Riley, S. (1993). Systematic Design of Automotive Weatherstrips using Taguchi Robust Design Methods , In: Eleventh Annual Taguchi Symposium, ASI, November 1993, pp. 103–123 .

Gong, C. and Kao, I. (1997). Design for Accuracy and Repeatability for Robots using Taguchi Methods , The Journal of Concurrent Engineering Research and Applications, 5: 263–278 .

Wu, Y. and Wu, A. (2000). Taguchi Methods for Robust Design, ASME Press .

Taguchi, G. , Chowdhury, S. and Wu, Y. (2001). The Mahalanobis-Taguchi System, McGraw Hill .

Taguchi, G. and Jugulum, R. (2002). The Mahalanobis-Taguchi Strategy: A Pattern Technology System, Wiley .

Taguchi, G. (1993). Taguchi on Robust Engineering, ASME Press .

Taguchi, G. (1995). Difference between Science and Engineering, Signal-to-noise Ratio, ASI, Tech. Report.

10.

Prasad, B. (1996). Concurrent Engineering Fundamentals, Integrated Product and Process Organization, Vol. 1, Upper Saddle River, New Jersey: Prentice Hall .

11.

Taguchi, G. (1991). System of Experimental Design, Vols. 1 and 2, Dearborn, Michigan: Quality Resources .

12.

Taguchi, G. and Konishi, S. (1992). Taguchi Methods Research and Development, Quality Engineering Series, Vol. 1, ASI Press .

13.

Cai, Z. (1994). A New Decode Algorithm for Binary Bar Codes , Pattern Recognition Letters, 15: 1191–1199 .