Toward development of a testbed for sustainable manufacturing

Abstract

A growing number of manufacturing companies are treating sustainability as a strategic objective that will increase both their global competitiveness and their market share. To implement this objective, these companies must first assess, and then evaluate, their current sustainability performance. Assessments and evaluations are carried out by choosing among a variety of existing sustainability metrics, assessment tools, and related standards. To help companies make the best choice, the National Institute of Standards and Technology is establishing a Smart Manufacturing Testbed, with an initial emphasis on sustainable manufacturing. The sustainable manufacturing testbed will provide (1) the infrastructure to demonstrate, test, and validate assessment methods and tools; (2) the ability to test conformance to current and future assessment-related standards; (3) the capability needed by the manufacturing industries to perform sustainability assessments; and (4) a repository for storing sustainability data related to products, resources, and processes from case studies describing real manufacturing scenarios. This article summarizes testbed requirements and functions, proposes an architecture that meets those requirements and implements those functions, and introduces a prototype system that enables companies to use the testbed.

Keywords

testbed testbed development sustainability sustainable manufacturing smart manufacturing

Get full access to this article

View all access options for this article.

References

Arinez

Biller

Lyons

. (2010) Benchmarking production system, process energy, and facility energy performance using a systems approach. In: Proceedings of the 2010 performance metrics for intelligent systems (PerMIS) workshop, Baltimore, MD, 28–30 September, pp. 88–96. Baltimore, MD: NIST.

Bushby

Galler

Ferretti

. (2010) The virtual cybernetic building testbed—a building emulator. ASHRAE Transactions 116(1): 37.

Engineering Research Center for Collaborative Adaptive Sensing of the Atmosphere (n.d.) Urban testbed. Available at: http://www.casa.umass.edu/main/research/urbantestbed/ (accessed 10 October 2013).

Gacek

Abd-Allah

Clark

. (1995) On the definition of software system architecture. In: Proceedings of the first international workshop on architectures for software systems, Seattle, WA, 24–25 April, pp. 85–94.

Gal’an

L’opez de Vergara

Fern’andez

. (2008) A model-driven configuration management methodology for testbed infrastructures. In: NOMS 2008: IEEE network operations and management symposium, Salvador, Brazil, 7–11 April, pp. 747–750. New York: IEEE.

Wang

Seliger

(2012) Sustainable consumption of water by NEGA-resources approach. In: Matsumoto

Umeda

Masui

(eds) Design for Innovative Value towards a Sustainable Society. Dordrecht: Springer, pp. 27–32.

Kipp

Jiang

Liu

. (2011) Testbed architecture for generic, energy-aware evaluations and optimizations. In: Proceedings of the first international conference on advanced communications and computation (INFOCOMP 2011), Barcelona, 23–29 October, pp. 103–108.

Paulson

. (2011) The development of a smart distribution grid testbed for integrated information management systems. In: Innovative smart grid technologies (ISGT), 2011 IEEE PES, Anaheim, CA, 17–19 January, pp. 1–8. New York: IEEE.

Luqi (1989) Software evolution through rapid prototyping. Computer 22(5): 13–25.

10.

Madan

Mani

Lyons

(2013) Characterizing energy consumption of the injection molding process. In: Proceedings of the ASME 2013 international manufacturing science and engineering conference (MSEC2013), Madison, WI, 10–14 June.

11.

Martin

Nigel

(2002) User requirement analysis—a review of supporting methods. In: Proceedings of IFIP 17th world computer congress, Montreal, QC, Canada, 25–30 August, pp. 133–148. Dordrecht: Kluwer Academic Publishers.

12.

National Institute of Standards and Technology (n.d.) Advanced manufacturing testbed. Available at: http://www.nist.gov/el/isd/ps/manutestbed.cfm (accessed 15 September 2013).

13.

Nunamaker

Jr Chen

(1990) Systems development in information systems research. In: Proceedings of the twenty-third annual Hawaii international conference on system sciences, Kailua, HI, 2–5 January, pp. 631–640. New York: IEEE.

14.

OMG (2011) OMG unified modeling language (OMG UML), superstructure. Version 2.4.1. Available at: http://www.omg.org/spec/UML/2.4.1/Superstructure/PDF/ (accessed 22 January 2014).

15.

Smith

Ball

(2012) Steps towards sustainable manufacturing through modelling material, energy and waste flows. International Journal of Production Economics 140(1): 227–238.

16.

Smith

(1991) Software Prototyping: Adoption, Practice and Management. London: McGraw-Hill.

17.

Taplin

DMR

Spedding

Khoo

(2006) Use of simulation and modelling to develop a sustainable production system. Sustainable Development 14(3): 149–161.

18.

U.S. Department of Commerce (n.d.) How does commerce define sustainable manufacturing? Available at: http://www.trade.gov/index.asp (accessed 20 September 2013).

19.

Vergnano

Thorstensson

Lennartson

. (2012) Modeling and optimization of energy consumption in cooperative multi-robot systems. IEEE Transactions on Automation Science and Engineering 9(2): 423–428.

20.

Watkins

Lyons

Mani

. (2013) Sustainability characterization for die casting process. In: Proceedings of the ASME 2013 international design engineering technical conferences and computers and information in engineering conference, Portland, OR, 4–7 August.

21.

Wewiór

Swat

Seliger

. (2013) Planning energy efficiency in manufacturing process chains-an innovative approach for an industrial product-service system. In: Shimomura

Kimita

(eds) The Philosopher’s Stone for Sustainability. Heidelberg: Springer, pp. 197–202.

22.

Whiteside

Pancerella

Klevgard

(1997) A CORBA-based manufacturing environment. In: Proceedings of the thirteen annual Hawaii international conference on system sciences, IEEE, Wailea, HI, 7–10 January, vol. 1, pp. 34–43. New York: IEEE.

23.

Zhou

Pan

Chen

. (2011) Simulation based analysis for selection and evaluation of green manufacturing strategies. In: Proceedings of 8th international conference on service systems and service management (ICSSSM11), Tianjin, China, 25–27 June, pp. 1–6. New York: IEEE.