Abstract
Background:
Subtalar arthritis is a common consequence following calcaneal fracture, and its development is related to the severity of the fracture. Previous calcaneal fracture models have demonstrated altered contact characteristics when a step-off is created in the posterior facet articular surface. Changes in posterior facet contact characteristics have not been previously characterized for calcaneal fracture gap without step-off.
Methods:
The contact characteristics (peak pressure, area of contact, and centroid of pressure) of the posterior facet of the subtalar joint were determined in 6 cadaveric specimens. After creating a calcaneal fracture to simulate a Sanders type II fracture, the contact characteristics were determined with the posterior facet anatomically reduced followed by an incremental increase in fracture gap displacement of 2, 3, and 5 mm without a step-off of the articular surface.
Results:
Peak pressure on the medial fragment was significantly less with a 5-mm gap compared to a 2- or 3-mm gap, or reduced. On the lateral fragment, the peak pressure was significantly increased with a 5-mm gap compared to a 2- or 3-mm gap. Contact area significantly changed with increased gap.
Conclusion:
In this study, there were no significant differences in contact characteristics between a <3-mm gap and an anatomically reduced fracture, conceding the study limitations including limiting axial loading to 50% of donor body weight.
Clinical Relevance:
A small amount of articular incongruity without a step-off can be tolerated by the subtalar joint, in contrast to articular incongruity with a step-off present.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
