Trajectory Tracking for the End-effector of a Class of Flexible Link Manipulators

Abstract

A new controller for the end-effector trajectory tracking (EETT) of a class of flexible link manipulators which consists of a chain of rigid links with a flexible end-link (CRFE) is introduced. To design this new controller, a dynamic model of the CRFE is expressed in the singularly perturbed form; that is, decomposed into slow and fast subsystems. The states of the slow subsystem are the joints’ rotations and their time derivative, while the states of the fast subsystem are the flexible variables, which model the lateral deflection of the end-link, and their time derivative. For the slow subsystem, the new controller requires only ‘‘one’’ corrective torque in addition to the computed torque command of the rigid link counterpart of the CRFE for the reduction of the EETT error. This corrective torque is derived based on the concept of the integral manifold of the singularly perturbed differential equations. The need for only one corrective torque and its derivation are among the contributions of the new controller. To stabilize the fast subsystem, an observer-based controller is designed according to the gain-scheduling technique. Due to the application of the observer-based controller there is no need for the measurement of the time derivative of the flexible link’s lateral deflection, in which its measurement is difficult if not impossible in practice. This feature of the new controller is an advantage for it. To facilitate the derivation and implementation of this controller, several properties of the matrices in the dynamic model of the CRFE are introduced and used which are other contributions of this research. The effectiveness and feasibility of the new controller are shown by simulation and experimental studies.

Keywords

End-effector trajectory tracking flexible multi-link manipulator integral manifold concept

Get full access to this article

View all access options for this article.

References

Asada, H. and Slotine, J.J.E. , 1986, Robot Analysis and Control, Wiley, New York.

Bensman, M. and Le Vey, G. , 2004, ‘‘Control of flexible manipulators: A survey,’’ Robotica 22(5), 533-545.

Bigras, P. , Saad, M. , and O’Shea, J. , 1998, ‘‘Exponential trajectory tracking control in the workspace of a class of flexible robots,’’ Journal of Robotic Systems 15(9), 487-504.

Book, W.J. , 1984, ‘‘Recursive Lagrangian dynamics of flexible manipulator arms,’’ International Journal of Robotics Research 3(3), 87-101.

De Luca, A. , Iannitti, S. , Mattone, R. , and Oriolo, G. , 2001, ‘‘Control problems in underactuated manipulators,’’ in Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Como, Italy, pp. 855- 861, July 8-12.

de Wit, C.C. , Olsson, H. , Astrom, K.J. , and Lischinsky, P. , 1995, ‘‘A new model for control of systems with friction,’’ IEEE Transactions on Automatic Control 40(3), 419-425.

Dupont, P. , Hayward, V. , Armstrong, F. , and Altpeter, F. , 2002, ‘‘Single state elastoplastic friction models ,’’ IEEE Transactions on Automatic Control 47(5), 787-792.

Gandhi, P.S. , Ghorbel, F.H. , and Dabney, J. , 2002, ‘‘Modeling, identification and compensation of friction in harmonic drives,’’ in Proceedings of the IEEE Conference on Decision and Control, Las Vegas, NV, pp. 160-166, December 10-13.

Gandhi, P.S. and Ghorbel, F.H. , 2002, ‘‘Closed-loop compensation of kinematic error in harmonic drives for precision control application,’’ IEEE Transactions on Control Systems Technology 10(6), 759-768.

10.

Ghorbel, F. and Spong, M.W. , 2000, ‘‘Integral manifold of singularly perturbed systems with application to rigid-link flexible-joint multibody system, ’’ International Journal of Non-Linear Mechanics 35, 133-155.

11.

Green, A. and Sasiadek, J. , 2004, ‘‘Dynamics and trajectory tracking control of a two-link robot manipulator,’’ Journal of Vibration and Control 10(10), 1415-1440.

12.

Khalil, H.K. , 2002, Nonlinear Systems, Prentice Hall, New Jersey.

13.

Kokotovic, P.V. , Khalil, H.K. , and O’Reilly, J. , 1999, Singular Perturbation Methods in Control: Analysis and Design, Academic, New York.

14.

Moallem, M. , Khorasani, K. , and Patel, R.V. , 1997, ‘‘An integral manifold approach for flexible link manipulators,’’ IEEE Transactions on Robotics and Automation 13(6), 823-837.

15.

Modi, V.J. , Cao, Y. , de Silva, C.W. , and Misra, A.K. , 2001, ‘‘A class of novel space platform-based manipulators with slewing and deployable links: analyses and experiments,’’ Journal of Vibration and Control 7(8), 1111-1161.

16.

Prezemienechi, J.S. , 1967, Theory of Matrix Structural Analysis, McGraw Hill, New York.

17.

Shahruz, S.M. and Behtash, S. , 1992, ‘‘Design of controllers for linear parameter-varying system by gain scheduling technique,’’ Journal of Mathematical Analysis and Application 168, 195-217.

18.

Siciliano, B. , Prasad, J.V.R. , and Calise, A.J. , 1992, ‘‘Output feedback two-time scale control of multi-link flexible arms,’’ Journal of Dynamic systems, Measurement and Control 114, 70-77.

19.

Sobolev, V.A. , 1984, ‘‘Integral manifolds and decomposition of singularly perturbed systems,’’ Systems and Control Letters 5, 169-179.

20.

Swevers, J. , Al-Bender, F. , Ganseman, C.G. , and Prajogo, T. , 2000, ‘‘An integrated friction model structure with improved presliding behaviour for accurate friction compensation, ’’ IEEE Transactions on Automatic Control 45(4), 675-686.

21.

Vakil, M. , 2008, ‘‘Dynamics and control of flexible manipulators,’’ Ph.D. thesis, University of Saskatchewan, Saskatoon, Canada.

22.

Vakil, M. , Fotouhi, R. , and Nikiforuk, P.N. , 2007, ‘‘Application of the integral manifold concept for the end-effector trajectory tracking of a flexible link manipulator,’’ in Proceedings of the American Control Conference , New York, pp. 741-747, July 11-13.

23.

Vakil, M. , Fotouhi, R. , and Nikiforuk, P.N. , 2008, ‘‘A constrained Lagrange formulation of multi-link planar flexible manipulator,’’ ASME Journal of Vibration and Acoustics 130 (3) (031007), 1-16.

24.

Vakil, M. , Fotouhi, R. , and Nikiforuk, P.N. , 2009, ‘‘Causal end-effector inversion of a flexible link manipulator ,’’ Mechatronics, 19, 1197-1210.