In open pit mines, the blasting operation should be effectively optimized at the lowest possible total cost, providing technical specifications and the required safety norms. The optimization demand measurement (ODM) value of blast should be evaluated by considering blast results and other mine unit operations, comprehensively. The present research proceeds by taking into consideration seven blast results including degree of fragmentation, muckpile, overbreak, boulders, bench floor and toe conditions, environmental considerations and misfires. Consequently, these results have been rated and classified. In the ODM, a value could be assigned to each blast, with lower values corresponding to better results of the blasting operation. The ODM procedure indicates a relationship between blasting results, drilling and loading performances. The specific mine unit operations index and the blast block situation rating are introduced in order to determine the ODM value. The blast results evaluation and its effects on the mining operation are analyzed by utilizing the blast results matrix [ζ], the performance matrix [P] and the ODM matrix [O]. Based on the results as well as considering optimization, blasts are classified into five modes: very good, good, relatively weak, weak and very weak. Thereafter, the ODM procedure is applied to the blasting operation at an Iranian iron ore open pit mine (Chador Malu), with nine blast blocks. In summary, this approach could help design engineers to recognize the optimization demand of the blasting operation at different mining conditions.
AdlerJDu MouzaJArnouldM (1996a) Measurement of the fragmentation efficiency of rock mass blasting and its mining applications. International Journal of Rock Mechanics and Mining Sciences. 33: 125–139.
2.
AdlerJDu MouzaJArnouldM (1996b) Evaluation of blast fragmentation efficiency and its prediction by multivariate analysis procedures. International Journal of Rock Mechanics and Mining Sciences and Geomechanics. 33: 189–196.
3.
AOG, 2007, AOG Workshop: Blast Fragmentation and Mining Cost, Quebec, Canada, 18–19 August 2007, Available online 21 July 2008, http://www.AOG.com/.
BremerDEthierRLillyD (2007) Factors driving continuous blasting improvement at the Lafarge Ravena Plant. International Society of Explosives Engineers – 33rd Annual Conference on Blasting Technique.
6.
CalderWorkman, 2008, An Analysis of Blasting Profitability and Productivity, Hunter Valley, NSW, 28–31 October 2008, pp. 41-45, http://www.calderworkman.com/.
CunninghamCVB (2005) The Kuz–Ram fragmentation model – 20 years. Proceedings 3rd EFEE World Conference on Explosives and Blasting: Brighton, UK, 2005, September201–210.
9.
Da GamaCD (1990) Reduction of costs and environmental impacts in quarry rock blasting. Proceedings of the 3rd International Symposium on Rock Fragmentation by Blasting: 26–31 August 1990, Brisbane5–8.
10.
Da GamaCDLopez JimenoC (1993) Rock fragmentation control for blasting cost minimization and environmental impact abatement. Proceedings of FRAGBLAST 4, Fragmentation by Blasting: 1993.
11.
ElorantaJ (1997) The efficiency of blasting versus crushing and grinding. Proceedings of the Twenty Third Annual Conference on Explosives and Blasting Technique: February 1997, Las Vegas, NVCleveland, OH: International Society of Explosive Engineers, pp. 157–163.
12.
ElorantaJ (2007) The effect of fragmentation on mining costs, a literature review. Workshop on the Measurement of Blast Fragmentation-Cost: Quebec, Canada.
13.
ElorantaJW (1993) Practical blast evaluation at the Minntac mine. Proceedings of the Nineteenth Conference of Explosives and Blasting Technique: 31 January–4 February 1993, San Diego, CACleveland, OH: International Society of Explosives Engineers, pp. 101–107.
14.
ElorantaJW (1995) The effect of fragmentation on downstream processing costs. Proceedings of Explo95 Conference: 4–7 September 1995, Brisbane, Queensland, Australia25–28.
15.
ElorantaJW (2001a) Improve milling through better powder distribution. Proceedings of the twenty-seventh conference of Explosives and Blasting Technique: 28–31 January, Orlando, FLCleveland, OH: International Society of Explosives Engineers.
16.
ElorantaJW (2001b) Optimized iron ore blast designs for SAG/AG Mills. 1, Proceedings of the International Conference on Autogenous and Semiautogenous Grinding Technology: 30 September–3 October, Vancouver, BC, Canada262–270.
17.
FrimpongMKabongoKDaviesC (1996) Diggability in a measure of dragline effectiveness and productivity. In: Proceedings of 22nd Annual Conference on Explosives and Blasting Techniques95–104.
18.
FuerstenauMCChiGBradtRC (1995) Optimization of energy utilization and production costs in mining and ore preparation. XIX International Mineral Processing Congress: October 1995, San Francisco, CA161–164.
19.
GrundstromCKanchibotlaSSJankovicAThorntonD (2001) Blast fragmentation for maximising the sag mill throughput at Porgera Gold Mine. Proceedings of the Twenty-Seventh Annual Conference on Explosives and Blasting Technique: Orlando.
20.
HamdiEdu MouzaJ (2005) A methodology for rock characterization and classification to improve blast results. International Journal of Rock Mechanics and Mining Sciences. 42: 177–194.
21.
Hammes J K (1966) The economics of producing and delivering iron ore pellets from North American taconite type resources. In: Proceedings of the 27th Annual Mining Symposium, University of Minnesota. pp.9–16.
22.
Harris GW, Mousset JP and Daemen JK (2001) Measurement of blast induced rock movement in surface mines by application of magnetic geophysics. Transactions of the Institution of Mining and Metallurgy (Section A: Mining Industry) 108: AI72–A180.
23.
Hadjigeorgiou J and Scoble M (1988) Prediction of digging performance in mining, Int. Journal of Surface Mining 2: 237–244.
24.
Hunter GC, Sandy DA and Miles NJ (1990) Optimisation of blasting in a large open pit mine, Fragblast '90. In: Proceedings 3rd International Symposium on Fragmentation by Blasting, Inst. Min. Metall., Victoria, Australia, pp.21–30.
25.
HustrulidW (1999) Blasting Principles for Open Pit Mining, Vol.1-General Design Concepts. Rotterdam: A.A. Balkema.
26.
JimenoCJimenoECarcedoF (1995) Drilling and Blasting of Rocks. Rotterdam: A.A. Balkema.
27.
KanchibotlaSSValeryWMorrellS (1999) Modelling fines in blast fragmentation and its impact on crushing and grinding. Proceedings Explo-99 Conference: Kalgoorlie.
28.
KatsabanisTThomasCWorkmanLPalangioTElorantaJ (2005) From drill to mill for mines and quarries. Newsletter of Advanced Optimisation Group. 4(1):
29.
KojovicT (2005) Influence of aggregate stemming in blasting on the SAG mill performance. Minerals Engineering. 18: 1398–1404.
30.
KontoghiorghesEJGatuC (2006) Optimisation, Econometric and Financial Analysis (Advances in Computational Management Science). Rotterdam: A.A. Balkema.
31.
LillyDP (2007) A statistical approach to integrating blasting into the mining process. Oxford Business and Economics Conference: 2007.
32.
MacKenzieAS (1965) Cost of explosives - do you evaluate it properly?In: American Mining Congress. Las Vegas, NV.
33.
McKee DJ, Chitombo GP, Morrell S (1995) The relationship between fragment fragmentation in mining and comminution circuit throughput. Mineral Engineering 18(11), 1265–1274.
34.
MoodyLCunninghamCLourensH (1996) Measuring the effect of blasting fragmentation on hard rock quarrying operations. Proceedings of FRAGBLAST5, Fragmentation by Blasting: 25–29 August 1996, Montreal, Quebec, Canada353–359.
35.
MorinMFicarazzoF (2006) Monte Carlo simulation as a tool to predict blasting fragmentation based on the Kuz–Ram model. Computers and Geosciences. 32: 352–359.
36.
MosherJB (2005) Comminution circuits for gold ore processing developments. Mineral Processing. 15: 253–277.
37.
NGDIR, 2009, Development planning and equipment of Chador Malu Iron ore mine. Technical Report, http://www.NGDIR.org.
38.
NielsenKKristiansenJ(1996) Blasting–crushing–grinding: optimisation of an integrated comminution system. In: MohantyB (eds) Rock Fragmentation by Blasting— Proceedings of Fragblast 5. Rotterdam: A.A. Balkema, pp. 269–277.
39.
NielsenKLowndsCM (1997) Enhancement of taconite crushing and grinding through primary blasting. International Journal of Rock Mechanics and Mining Sciences. 34: 226.e1–226.e14.
40.
Pal RoyP (2005) Rock Blasting Effects and Operations. New Delhi: Oxford & IBH nublishing Co. Pvt. Ltd.
41.
R&D Department of Chador Malu Mine (2009) Guidelines of Mining Operation. T4108 project final report.
42.
Ryu DW, Shim HJ, Han CY, and Ahn SM (2006) Prediction of rock fragmentation and design of blasting pattern based on 3-D spatial distribution of rock factor, International journal of rock mechanics and mining sciences 46(2): 326–332.
43.
SaatyTL (1980) The Analytic Hierarchy Process. New York: McGraw-Hill.
44.
SinghSP (2006) Fragmentation prediction during ring blasting using a discrete Kuz–Ram Model. 16th International Symposium on MPES: 20–22 September, Torino, Italy.
45.
SinghSPYalcinT (2002) Effects of muck size distribution on scooping operations. Proceedings of 28th Annual Conference on Explosives and Blasting Techniques: 315–325.
46.
SinghSPYalcinTGloggerMNarendrulaR (2003) Interaction between the size distribution of the muck and the loading equipment. Proceedings of the 4th International Conference on Computer Applications in Mineral Industries: 1–13.
47.
StaggMSOtternessRESiskindDE (1992) Effects of blasting practices on fragmentation. Proceedings of the 33rd US Symposium on Rock Mechanics: 3–5 June 1992, Santa Fe313–322.
48.
TajiM (2008) The classification of open pit mine blast results by BBSR. Proceedings of the 1th National Symposium on Blasting Engineering and Industrial Explosives, BEIE 2008: Electronic file No. 004.
49.
TaqieddinSA (1989) Evaluation of the efficiency of a blasting operation designed for a dragline strip mining process. International Journal of Rock Mechanics and Mining Science and Geomechanics. 8: 59–64.
50.
WangY-JZhangX-ZQiL-Q (2005) Unconstrained optimization reformulation of the generalized nonlinear complementarity problem and related method. Optimization. 54: 563–577.
51.
Workman L (2001) An analysis of blasting profitability and productivity, Hunter Valley, NSW, 28–31 Oct., pp.41–45.
52.
WorkmanLElorantaJ, 2008, The effects of blasting on Crushing and grinding efficiency and energy consumption, 3 June 2008. Available at: http://www.isee.org/.
53.
Williamson S, Mckenzie C, O'Loughlin H (1983). Electric shovel performance as a measure of blasting efficiency. In: 1th International Symposium on Rock Fragmentation by Blasting, Luleå University of Technology, Vol.1, pp.76–83.
