In this study, free in-plane and out-of-plane bending vibrations of frame structures have been analyzed together with torsional vibration. Axial extension, rotational inertia and shear effects have also been considered. The frame structure has been designed to have two beams with doubly symmetric cross sections that are connected at various angles to each other. Natural frequencies have been obtained analytically by solving simultaneous linear equations of complex coefficients. Finite element and experimental modal analysis have also been conducted to verify the analytical results. The agreement among the results from the various methods has been found to be good.
AlbarracinCMGrossiRO (2005) Vibration of elastically restrained frames. Journal of Sound and Vibration285: 467–476.
2.
AnsellA (2005) The dynamic element method for analysis of frame and cable type structures. Engineering Structures27: 1906–1915.
3.
AntesHSchanzMAlvermannS (2004) Dynamic analysis of frames by integral equations for bars and Timoshenko beams. Journal of Sound and Vibration276(3–5): 807–836.
4.
BirkhoffGRotaGC (1978) Ordinary Differential Equations, New York: John Wiley and Sons.
5.
BokaianA (1990) Natural frequencies of beams under tensile axial loads. Journal of Sound and Vibration142: 481–498.
6.
GeradinMChenSL (1995) An exact model reduction technique for beam structures: combination of transfer and dynamic stiffness matrices. Journal of Sound and Vibration185: 431–440.
7.
HepplerGROguamanamDCDHansenJS (2003) Vibration of two-member open frames. Journal of Sound and Vibration263: 299–317.
8.
HowsonWPWilliamsFW (1973) Natural frequencies of frames with axially loaded Timoshenko members. Journal of Sound and Vibration26: 503–515.
9.
LinHPRoJ (2003) Vibration analysis of planar serial-frame structures. Journal of Sound and Vibration262: 1113–1131.
10.
LinHPWuJD (2005) Dynamic analysis of planar closed-frame structures. Journal of Sound and Vibration282: 249–264.
11.
MeadJD (2002) Free vibrations of self-strained assemblies of beams. Journal of Sound and Vibration249: 101–127.
12.
MoonDHChoiMS (2000) Vibration analysis for frame structures using transfer of dynamic stiffness coefficient. Journal of Sound and Vibration234: 725–736.
13.
OhgaMShigematsuTHaraT (1983) Structural analysis by a combined finite element transfer matrix method. Computers and Structures17: 321–326.
14.
OvuncBA (1974) Dynamics of frameworks by continuous mass method. Computers and Structures4: 1061–1089.
15.
RafezyBZareAHowsonWP (2007) Coupled lateral-torsional frequencies of asymmetric three-dimensional frame structures. International Journal of Solids and Structures44: 128–144.
16.
SehmiNS (1989) Large Order Structural Eigenanalysis Techniques Algorithm for Finite Element Systems, New York: Ellis Horwood.
17.
WangXWangYZhouY (2004) Application of new differential quadrature element method to free vibrational analysis of beams and frame structures. Journal of Sound and Vibration269(3–5): 1133–1141.
18.
YuanSYeKWilliamsFW (2003) Recursive second order convergence method for natural frequencies and modes when using dynamic stiffness matrices. International Journal for Numerical Methods in Engineering56: 1795–1814.
