This paper presents the results of an extensive series of experimental tests to identify the mechanical characteristics of a recently-proposed seismic isolation device known as the Roll- In-Cage (RNC) isolator. Several 1/10 reduced-scale experimental prototypes are examined considering different configurations, characteristics and construction materials. Cyclic horizontal displacement tests, varying the test parameters of shear displacement amplitude, axial load, and loading frequency are performed. The RNC isolator’s force-displacement relationship, shear stiffness and damping properties are investigated in terms of different test parameters. In addition, vertical cyclic displacement is applied to examine the RNC isolator’s capability to withstand vertical axial tension. Furthermore, tests at the ultimate-level consisting of an increasing monotonic shear loading beyond the bearing’s design displacement are also carried out to investigate its behavior after activating its self-stopping or buffer mechanism. Some experimentally obtained results are verified using numerical simulation models. A comparative analysis of the results is then performed to allow for highlighting the main features of the RNC isolator.
Al-Hussaini T, Zayas V and Constantinou M (1994) Seismic isolation of a multi-story frame structure using spherical sliding isolation systems. Technical report, NCEER-94-0007, National Center of Earthquake Engineering Research, Buffalo, NY.
2.
ANSYS Inc. (2014) ANSYS release 16 documentation, Canonsburg, USA: ANSYS Inc.
3.
ArnoldC (2001) Architectural considerations. In: NaeminF (ed.) The Seismic Design Handbook, 2nd ed, New York: Chapman and Hall, pp. 275–326.
4.
BuckleIMayesR (1990) Seismic isolation history: application and performance - a world review. Earthquake Spectra6: 161–201.
Ismail M (2009) An innovative isolation device for aseismic design. PhD Thesis. Technical University of Catalonia, Barcelona, Spain. Available at: http://www.tdx.cat/handle/10803/6265 (accessed 1 December 2009).
7.
Ismail M and Rodellar J (2013) A mechanical extension for Stewart platform (Hexapod). Patent No. P201331348, Spanish Office of Patents and Marks.
8.
Ismail M and Rodellar J (2014a) Experimental mechanical characterization of a rolling-based seismic isolation system. In: 6th World Conference on Structural Control and Monitoring (eds J Rodellar, A Güemes and F Pozo), Barcelona, Spain, 15-17 July 2014, pp. 1148-1157.
9.
Ismail M and Rodellar J (2014b) A multi-purpose mechanical testing platform using hexapod. In: 6th World Conference on Structural Control and Monitoring (eds J Rodellar, A Güemes and F Pozo), Barcelona, Spain, 15-17 July 2014, pp. 1045-1056.
10.
Ismail M, Rodellar J and Ikhouane F (2008) Method for the seismic isolation of a supported object. Patents No. WO2010000897A1, ES20080002043, P200802043, Spanish Office of Patents and Marks.
11.
IsmailMRodellarJIkhouaneF (2009a) Performance of structure-equipment systems with a novel roll-n-cage isolation bearing. Computers and Structures87: 1631–1646.
12.
IsmailMRodellarJIkhouaneF (2009b) An innovative isolation bearing for motion-sensitive equipment. Journal of Sound and Vibration326: 503–521.
13.
IsmailMRodellarJIkhouaneF (2010) An innovative isolation device for aseismic design. Engineering Structures32: 1168–1183.
14.
IsmailMRodellarJIkhouaneF (2012) Seismic protection of low- to moderate-mass buildings using RNC isolator. Structural Control and Health Monitoring19: 22–42.
15.
IsmailMCasasJRRodellarJ (2013a) Near-fault isolation of cable-stayed bridges using RNC isolator. Engineering Structures56: 327–342.
16.
IsmailMRodellarJCarusoneGDomaneschiMMartinelliL (2013b) Characterization, modeling and assessment of roll-n-cage isolator using the cable-stayed bridge benchmark. Acta Mechanica224: 525–547.
17.
JangidR (2000) Stochastic seismic response of structure isolated by rolling rods. Engineering Structures22: 937–946.
18.
JangidRLondheY (1998) Effectiveness of elliptical rolling rods for base isolation. Journal of Structural Engineering ASCE124: 469–472.
19.
Jurukovski D and Rakicevic Z (1995) Vibration base isolation development and application. In: 10th European Conference on Earthquake Engineering (ed G Duma), Vienna, Austria, 28 August–2 September 1994, pp. 667–676. Rotterdam: AA Balkema.
20.
KellyJ (1986) Aseismic base isolation: Review and bibliography. Soil Dynamics and Earthquake Engineering5: 202–216.
21.
KellyJ (1997) Earthquake Resistance Design with Rubber, London: Springer.
22.
KellyJ (1999) The role of damping in seismic isolation. Earthquake Engineering and Structural Dynamics28: 3–20.
23.
KundeMJangidR (2003) Seismic behavior of isolated bridges: a state-of-the-art review. Electronic Journal of Structural Engineering3: 140–170.
24.
LinTHoneC (1993) Base isolation by free rolling rods under basement. Earthquake Engineering and Structural Dynamics22: 261–273.
25.
LinTChernCHoneC (1995) Experimental study of base isolation by free rolling rods. Earthquake Engineering and Structural Dynamics24: 1645–1650.
26.
MostaghelNHejaziMTanbakuchiJ (1983) Response of sliding structures to harmonic support motion. Earthquake Engineering and Structural Dynamics11: 355–366.
27.
MurnalPSinhaR (2004) Aseismic design of structure–equipment systems using variable frequency pendulum isolator. Nuclear Engineering and Design231: 129–139.
28.
NaeimFKellyJ (1999) Design of Seismic Isolated Structures . From Theory to Practice, New York: John Wiley and Sons.
29.
RobinsonWTuckerA (1977) A lead-rubber shear damper. Bulletin of the New Zealand National Society for Earthquake Engineering10: 151–153.
30.
RobinsonWTuckerA (1983) Test results for lead-rubber bearings for the William M. Clayton building, Toe Toe bridge, and Waiotukupuna bridge. Bulletin of the New Zealand National Society for Earthquake Engineering14: 21–33.
31.
SoongTConstantinouM (1994) Passive and Active Structural Vibration Control in Civil Engineering, Vienna: Springer.
32.
StaudacherK (1982) Integral earthquake protection of structures IV: full base isolation and seismic mass analogy. Technical Report, Eidgenossische Technische Hochschule (Zurich), Inst. für Baustatikund Konstruktion, Basel, Switzerland.
33.
TylerRRobinsonW (1984) High-strain tests on lead-rubber bearings for earthquake loadings. Bulletin of the New Zealand National Society for Earthquake Engineering17: 90–105.
34.
WarnGRyanK (2012) A review of seismic isolation for buildings: Historical development and research needs. Buildings2: 300–325.
35.
ZhouQLuXWangQFengDYaoQ (1998) Dynamic analysis on structures base-isolated by a ball system with restoring property. Earthquake Engineering and Structural Dynamics27: 773–791.
