Based on the nonlinear characteristics of permanent magnet synchronous motor (PMSM), a nonlinear speed and direct torque control (DTC) using sliding mode backstepping method for PMSM is presented in this paper. The sliding mode speed controller is implemented with exponential reaching law to improve the robustness of the system, and further a step-by-step recursive design for backstepping torque and flux controllers is presented. The system stability with proposed scheme is mathematically proved using Lyapunov stability criteria. At the same time, the load torque is observed with the extended state observer (ESO), and is fed-forward to the controller for rejecting the load disturbance and to mitigate the chattering affect due to the sliding mode controller. Finally, simulation test results are demonstrated to support the effectiveness and feasibility of the proposed strategy.
AdhavanBJagannathanV (2014) Performance comparison of hysteresis pulse width modulation and space vector pulse width modulation techniques for torque ripple reduction in permanent magnet synchronous motor using iterative learning control. Journal of Vibration and Control20: 698–712.
2.
AnanthamoorthyNPBaskaranK (2015) Speed and torque control of permanent magnet synchronous motor using hybrid fuzzy proportional plus integral controller. Journal of Vibration and Control21: 563–579.
3.
ChoYLeeKBSongJHLeeYI (2015) Torque-ripple minimization and fast dynamic scheme for torque predictive control of permanent-magnet synchronous motors. IEEE Transactions on Power Electronics30: 2182–2190.
4.
ChoiHHVuNTTJungJW (2012) Design and implementation of a Takagi–Sugeno fuzzy speed regulator for a permanent magnet synchronous motor. IEEE Transactions on Industrial Electronics59: 3069–3077.
5.
FallahaCJSaadMKanaanHYAl-HaddadK (2011) Sliding-mode robot control with exponential reaching law. IEEE Transactions on Industrial Electronics58: 600–610.
6.
Foo G and Rahman MF (2008) A novel speed sensorless direct torque and flux controlled interior permanent magnet synchronous motor drive. In Power Electronics Specialists Conference, Rhodes, Greece, 15–19 June, pp. 50–56.
7.
FooGRahmanMF (2009) Direct torque and flux control of an IPM synchronous motor drive using a backstepping approach. IET electric power applications3: 413–421.
8.
GaoWHungJC (1993) Variable structure control of nonlinear systems: a new approach. IEEE Transactions on Industrial Electronics40: 45–55.
9.
HanJ (2009) From PID to active disturbance rejection control. IEEE Transactions on Industrial Electronics56: 900–906.
10.
InoueYMorimotoSSanadaM (2010) Examination and linearization of torque control system for direct torque controlled IPMSM. IEEE Transactions on Industry Applications46: 159–166.
11.
LiXLiS (2014) Speed Control for a PMSM Servo System Using Model Reference Adaptive Control and an Extended State Observer. Journal of Power Electronics14: 549–563.
12.
LiuTHPuHTLinCK (2010) Implementation of an adaptive position control system of a permanent-magnet synchronous motor and its application. IET electric power applications4: 121–130.
13.
MarinoRTomeiP (1995) Nonlinear Control Design: Geometric, Adaptive and Robust, New York: Prentice Hall.
14.
Miklosovic R and Gao Z (2004) A robust two-degree-of-freedom control design technique and its practical application. In 39th IAS Annual Meeting Industry Applications Conference, Seattle, America, 3–7 October, pp. 1495–1502.
15.
MorawiecM (2013) The adaptive backstepping control of permanent magnet synchronous motor supplied by current source inverter. IEEE Transactions on Industrial Informatics9: 1047–1055.
16.
RahmanMAVilathgamuwaDMUddinMNTsengKJ (2003) Nonlinear control of interior permanent-magnet synchronous motor. IEEE Transactions on Industry Applications39: 408–416.
17.
RahmanMFZhongLLimKW (1998) A direct torque-controlled interior permanent magnet synchronous motor drive incorporating field weakening. IEEE Transactions on Industry Applications34: 1246–1253.
18.
SivaprakasamAManigandanT (2015) An alternative scheme to reduce torque ripple and mechanical vibration in direct torque controlled permanent magnet synchronous motor. Journal of Vibration and Control21: 855–871.
19.
TangLZhongLRahmanMFHuY (2004) A novel direct torque controlled interior permanent magnet synchronous machine drive with low ripple in flux and torque and fixed switching frequency. IEEE Transactions on Power Electronics19: 346–354.
20.
TrabelsiRKhedherAMimouniMFM'sahliF (2012) Backstepping control for an induction motor using an adaptive sliding rotor-flux observer. Electric Power Systems Research93: 1–15.
21.
WangAJiaXDongS (2013) A new exponential reaching law of sliding mode control to improve performance of permanent magnet synchronous motor. IEEE Transactions on Magnetics49: 2409–2412.
22.
WeiQWangXYHuXP (2014) Optimal control for permanent magnet synchronous motor. Journal of Vibration and Control20: 1176–1184.
23.
YaoJJiaoZMaD (2014) Adaptive robust control of DC motors with extended state observer. IEEE Transactions on Industrial Electronics61: 3630–3637.
24.
YuJChenBYuH (2010) Position tracking control of induction motors via adaptive fuzzy backstepping. Energy Conversion and Management51: 2345–2352.
25.
ZhangYZhuJ (2011) Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency. IEEE Transactions on Power Electronics26: 235–248.
26.
ZhangXSunLZhaoKSunL (2013) Nonlinear speed control for PMSM system using sliding-mode control and disturbance compensation techniques. IEEE Transactions on Power Electronics28: 1358–1365.
27.
ZhuHXiaoXLiY (2012) Torque ripple reduction of the torque predictive control scheme for permanent-magnet synchronous motors. IEEE Transactions on Industrial Electronics59: 871–877.
