The effects of the pseudoelastic hysteresis of shape memory alloy springs on the aeroelastic behavior of a typical airfoil section are numerically investigated for six different sets of alloy constitutive properties. A two-degree-of-freedom (namely, plunge and pitch) typical section is modeled. Shape memory alloy helical springs are considered in the pitch degree-of-freedom based on classical phenomenological models modified by the pure shear assumption. Tension–compression asymmetry and nonhomogeneous distributions of shear strain, shear stress and martensitic fraction in the cross-sectional area of the coiled shape memory alloy wire are considered. A linear model is used to determine the unsteady aerodynamic loads. Attractive alloy characteristics, which can enhance the aeroelastic behavior of the typical section at the flutter boundary and at the post-flutter regime, are identified and discussed in detail.
AguiarRAASaviMAPachecoPMCL (2010) Experimental and numerical investigations of shape memory alloy helical springs. Smart Materials and Structures19(2): 025008.
2.
AguiarRAASaviMAPachecoPMCL (2013) Experimental investigation of vibration reduction using shape memory alloys. Journal of Intelligent Material Systems and Structures24(2): 247–261.
3.
ArenaALacarbonaraWMarzoccaP (2013) Nonlinear aeroelastic formulation and post flutter analysis of flexible high-aspect-ratio wings. Journal of Aircraft50(6): 1748–1764.
4.
BachmannFOliveiraRSiggAet al. (2012) Passive damping of composite blades using embedded piezoelectric modules or shape memory alloy wires. Smart Materials and Structures21(7): 075027.
5.
BarbarinoSSaavedra FloresEIAjajRMet al. (2014) A review on shape memory alloys with applications to morphing aircraft. Smart Materials and Structures23(6): 063001.
6.
BarzegariMMDardelMFathiAet al. (2012) Aeroelastic characteristics of cantilever wing with embedded shape memory alloys. Acta Astronautica79: 189–202.
7.
BarzegariMMDardelMFathiA (2015) Control of aeroelastic characteristics of cantilever wing with smart materials using state-dependent Riccati equation method. Journal of Intelligent Material Systems and Structures26(8): 988–1005.
8.
BhowmickSMishraSK (2016) FNCATB Superelastic damper for seismic vibration mitigation. Journal of Intelligent Material Systems and Structures. Epub ahead of print 21 December 2015. DOI: 10.1177/1045389X15620039.
BrinsonLC (1993) One-dimensional constitutive behavior of shape memory alloys: Thermomechanical derivation with non-constant material functions and redefined martensite internal variable. Journal of Intelligent Material Systems and Structures4(2): 229–242.
11.
BucchiFElahiniaMHFortePet al. (2014) A passive magneto-thermo-mechanical coupling actuated by SMA springs and MR fluid. International Journal of Structural Stability and Dynamics14(8): 1440031.
12.
CarboniBLacarbonaraWAuricchioF (2015) Hysteresis of multiconfiguration assemblies of nitinol and steel strands: Experiments and phenomenological identification. Journal of Engineering Mechanics141(3): 04014135.
13.
ConnerMDTangDMDowellEHet al. (1997) Nonlinear behavior of a typical airfoil section with control surface freeplay. Journal of Fluids and Structures11(1): 89–109.
14.
Dowell EH (2015) A Modern Course in Aeroelasticity. 5th ed. Springer. 700 p. Chapter 11: Nonlinear Aeroelasticity. pp. 487–529. DOI: 10.1007/978-3-319-09453-3.
15.
DowellEHTangD (2002) Nonlinear aeroelasticity and unsteady aerodynamics. AIAA Journal40(9): 1697–1707.
ElahiniaMHHashemiMTabeshMet al. (2012) Manufacturing and processing of NiTi implants: A review. Progress in Materials Science57(5): 911–946.
18.
FrenzelJGeorgeEPDlouhyAet al. (2010) Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Materialia58(9): 3444–3458.
19.
FrostMSedlákPKadeřávekLet al. (2015) Modeling of mechanical response of NiTi shape memory alloy subjected to combined thermal and non-proportional mechanical loading: A case study on helical spring actuator. Journal of Intelligent Material Systems and Structures. Epub ahead of print 26 October 2015. DOI: 10.1177/1045389X15610908.
20.
GallKSehitogluHChumlyakovYIet al. (1999) Tension-compression asymmetry of the stress-strain response in aged single crystal and polycrystalline NiTi. Acta Materialia47(4): 1203–1217.
21.
GandhiFChapuisG (2002) Passive damping augmentation of a vibrating beam using pseudoelastic shape memory alloy wires. Journal of Sound and Vibration250(3): 519–539.
22.
GilletYPatoorEBerveillerM (1998) Calculation of pseudoelastic elements using a non-symmetrical thermomechanical transformation criterion and associated rule. Journal of Intelligent Material Systems and Structures9(5): 366–378.
23.
HaberlandCElahiniaMHWalkerJMet al. (2014) On the development of high quality NiTi shape memory and pseudoelastic parts by additive manufacturing. Smart Materials and Structures23(10): 104002.
24.
Hartl DJ and Lagoudas DC (2007) Aerospace applications of shape memory alloys. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 221(4): 535–552.
25.
HodgesDHPierceGA (2011) Introduction to Structural Dynamics and Aeroelasticity (Cambridge Aerospace Series, Vol. 15), 2nd ed. New York, NY: Cambridge University Press.
26.
HuangW (2002) On the selection of shape memory alloys for actuators. Materials and Design23(1): 11–19.
27.
JankeLCzaderskiCMotavalliMet al. (2005) Applications of shape memory alloys in civil engineering structures – Overview, limits and new ideas. Materials and Structures38(5): 578–592.
28.
LagoudasDC (2008) Shape Memory Alloys: Modeling and Engineering Applications, New York: Springer.
29.
LeishmanJGBeddoesTS (1989) A semi-empirical model for dynamic stall. Journal of the American Helicopter Society34(3): 3–17.
30.
LiangCRogersCA (1997) Design of shape memory alloy springs with applications in vibration control. Journal of Intelligent Material Systems and Structures8(4): 314–322.
31.
ManiYSenthilkumarM (2015) Shape memory alloy-based adaptive-passive dynamic vibration absorber for vibration control in piping applications. Journal of Vibration and Control21(9): 1838–1847.
32.
MehrabiRKadkhodaeiMElahiniaMH (2014) Constitutive modeling of tension-torsion coupling and tension-compression asymmetry in NiTi shape memory alloys. Smart Materials and Structures23(7): 075021.
33.
MeltonKN (1990) Ni-Ti based shape memory alloys. In: DuerigTWMeltonKNStöckelD (eds) Engineering Aspects of Shape Memory Alloys, London: Butterworth-Heinemann, pp. 21–35.
34.
MishraSKGurSChakrabortyS (2013) An improved tuned mass damper (SMA-TMD) assisted by a shape memory alloy spring. Smart Materials and Structures22(9): 095016.
35.
Mozaffari-JovinSFirouz-AbadiRDRoshanianJ (2015) Flutter of wings involving a locally distributed flexible control surface. Journal of Sound and Vibration357: 377–408.
36.
OzbulutOEHurlebausSDesRochesR (2011) Seismic response control using shape memory alloys. Journal of Intelligent Material Systems and Structures22(14): 1531–1549.
37.
PoorasadionSArghavaniJNaghdabadiRet al. (2014) An improvement on the Brinson model for shape memory alloys with application to two-dimensional beam element. Journal of Intelligent Material Systems and Structures25(15): 1905.
38.
RaoASrinivasaAR (2015) A three-species model for simulating torsional response of shape memory alloy components using thermodynamic principles and discrete Preisach models. Mathematics and Mechanics of Solids20(3): 345–372.
39.
RavariMRKKadkhodaeiMGhaeiA (2016) Effects of asymmetric material response on the mechanical behavior of porous shape memory alloys. Journal of Intelligent Material Systems and Structures27(12): 1687–1701.
40.
RezaeiDAHKadkhodaeiMNahviH (2012) Analysis of nonlinear free vibration and damping of a clamped-clamped beam with embedded prestrained shape memory alloy wires. Journal of Intelligent Material Systems and Structures23(10): 1107–1117.
41.
SameallahSKadkhodaeiMLegrandVet al. (2014) Direct numerical determination of stabilized dissipated energy of shape memory alloys under cyclic tensile loadings. Journal of Intelligent Material Systems and Structures26(16): 2137–2150.
42.
SaviMASáMANPaivaAPachecoPMCL (2008) Tensile-compressive asymmetry influence on shape memory alloy system dynamics. Chaos, Solitons and Fractals36(4): 828–842.
43.
SaviMAPachecoPMCLGarciaMSet al. (2015) Nonlinear geometric influence on the mechanical behavior of shape memory alloy helical springs. Smart Materials and Structures24(3): 035012.
44.
SousaVCAnicézioMMDe MarquiCJret al. (2011) Enhanced aeroelastic energy harvesting by exploiting combined nonlinearities: Theory and experiment. Smart Materials and Structures20(9): 094007.
45.
SousaVCDe MarquiCJr (2016) Effect of pseudoelastic hysteresis of shape memory alloy springs on the aeroelastic behavior of a typical airfoil section. Journal of Intelligent Material Systems and Structures27(1): 117–133.
46.
TangDMDowellEH (2004) Effects of geometric structural nonlinearity on flutter and limit cycle oscillations of high-aspect-ratio wings. Journal of Fluids and Structures19(3): 291–306.
47.
TawfikMRoJ-JMeiC (2002) Thermal post-buckling and aeroelastic behaviour of shape memory alloy reinforced plates. Smart Materials and Structures11(2): 297–307.
48.
TokudaMYeMTakakuraMet al. (1999) Thermomechanical behavior of shape memory alloy under complex loading conditions. International Journal of Plasticity15(2): 223–239.
49.
Van HumbeeckJ (2003) Damping capacity of thermoelastic martensite in shape memory alloys. Journal of Alloys and Compounds355(1–2): 58–64.
50.
VasconcellosRAbdelkefiAMarquesFDet al. (2012) Representation and analysis of control surface freeplay nonlinearity. Journal of Fluids and Structures31: 79–91.
