This study studies the performance of an integral force feedback controller for increasing the damping of lightweight flexible structures. Both methods of maximum damping and optimization are used to tune the parameters of the control system. Two modifications of the integral force feedback are proposed to compensate the effects of a soft stiffness to increase the authority of the actuator. Higher damping values are obtained by adding feedback terms to the integral force feedback. Optimal tuning, required actuator force, and stability are also discussed based on an academic model of a single-degree-of-freedom cable structure.
AchkireY (1997) Active tendon control of cable-stayed bridges. PhD Dissertation, Active Structures Laboratory, Université Libre de Bruxelles, Belgium.
2.
BazARoJ (1991) Active control of flow-induced vibrations of a flexible cylinder using direct velocity feedback. Journal of Sound and Vibration146(1): 33–45.
3.
BossensF (2001) Amortissement actif des structures cablées: de la théorie à l’implémentation. Doctoral Dissertation, PhD Thesis, Université Libre de Bruxelles, Brussels, Belgium.
4.
ChesnéSMilhomemAColletteC (2016) Enhanced damping of flexible structures using force feedback. Journal of Guidance, Control, and Dynamics39(7): 1654–1658.
5.
GohCJ (1983) Analysis and control of quasi distributed parameter systems. Doctoral Dissertation, California Institute of Technology, Pasadena, CA.
6.
GohCJCaugheyTK (1985) On the stability problem caused by finite actuator dynamics in the collocated control of large space structures. International Journal of Control41(3): 787–802.
7.
MohammadshahiD (2013) Dynamics and control of cables in cable-actuated systems. Doctoral Dissertation, McGill University Libraries, Montreal, Quebec.
8.
PaknejadAZhaoGOséeM, et al. (2020) A novel design of positive position feedback controller based on maximum damping and H 2 optimization. Journal of Vibration and Control26(15–16): 1155–1164.
9.
PreumontA (2018) Tendon control of cable structures. In: Vibration Control of Active Structures. Cham: Springer, 377–415.
10.
PreumontAFrançoisABossensF, et al. (2002) Force feedback versus acceleration feedback in active vibration isolation. Journal of sound and vibration257(4): 605–613.
11.
PreumontAVoltanMSangiovanniA, et al. (2016) Active tendon control of suspension bridges. Smart Structures and Systems18(1): 31–52.
12.
TeoYRFlemingAJ (2015) Optimal integral force feedback for active vibration control. Journal of Sound and Vibration356: 20–33.
13.
ZhaoGPaknejadADeraemaekerA, et al. (2019) H∞ optimization of an integral force feedback controller. Journal of vibration and control25(17): 2330–2339.
