Vibrostability of a Multidimensional Machine Tool-Workpiece-Tool System,Part I: Modeling the Mechanical Structure and Cutting Process

Abstract

Predicting the vibrostability of machine tools requires mathematical models for the elements that form a multidimensional dynamic machine tool-workpiece-tool system (i.e., mass-damping-spring system, cutting process, friction process, processes of driving motors, and the control system). This article presents the principles of modeling this system using the rigid finite element method. The result is a mathematical model that is useful in analyzing dynamic properties of a machine, including the vibrostability (dynamic stability) analysis. Part I describes the modeling of the multidimensional mass-damping-spring system of a machine tool and cutting process. This enables the designer to construct an entire model of the system and to analyze its dynamic properties during designing, including predicting the vibrostability.

Keywords

Machine tool dynamics vibrostability working processes modeling

Get full access to this article

View all access options for this article.

References

Das, M.K. and Tobias, S.A. , 1967, "The relation between the static and dynamic cutting of metals," International Journal of Machine Tool Design and Research 7, 63-89.

Dolbey, M.P. and Bell, R. , 1971, "The contact stiffness of joints at low apparent interface pressures," Annals of the CIRP 19( 1 ), 67-79.

Grasso, V. , Noto La Diega, S. , and Passananti, A. , 1980, "Dynamic cutting coefficients in three-dimensional cutting ," International Journal of Machine Tool Design and Research 20, 235-249.

Koenigsberger, I. and Tlusty, J. , 1971, Structures of Machine Tools, Pergamon , New York.

Kruszewski, J. , Gawronski, W. , Wittbrodt, E. , Najber, F. , and Grabowski, F. , 1975, Rigid Finite Elements Method, Arkady , Warsaw, Poland (in Polish).

Kudinov, V.A. , 1967, Machine Tool Dynamics, Masinostrojenie, Moskva, Russia (in Russian).

Levina, Z.M. and Resetov, D.N. , 1971, The Contact Stiffness of Machines, Masinostrojenie, Moskva, Russia (in Russian).

Mackowiak, H. , Berczynski, S. , and Marchelek, K. , 1992, "Flexural-torsional vibrations of a multi-speed gear transmission ," Journal of Theoretical and Applied Mechanics 1(30), 155-175.

Marchelek, K. , 1991, Machine Tool Dynamics, Wydawnictwo Naukowo Techniczne, Warsaw, Poland (in Polish).

10.

Pajor, M. , Tomków, J. , and Witek, A. , 1993, "Computing the vibrostability using the DOUNO system ," Archive of Mechanical Engineering and Automation 12, 301-321 (in Polish).

11.

Sridhar, R. , Hohn, R.E. , and Long, G.W. , 1968, "A stability algorithm for the general milling process: Contribution to machine tool chatter research -7," Transactions of ASME B 90(2), 330-334.

12.

Szwengier, G. , 1993, "Load correction method in design calculations of machine elements contact connections, part I—Conception of the method; part II—Modeling of systems with contact connections," Archive of Mechanical Engineering and Automation 12, 423-459 (in Polish).

13.

Szwengier, G. , Berczynski, S. , and Godunski, T. , 1988, "Identifying physical parameters of machine tool slideway joints," Advances in Technology of Machines and Mechanical Equipment 2, 3-22 (in Polish).

14.

Tlusty, J. and Ismail, F. , 1981, "Basis nonlinearity in machining chatter," Annals of the CIRP 30(1), 299-305.

15.

Tobias, S.A. , 1965, Machine Tool Vibration, John Wiley , New York.

16.

Tomków, J. , Marchelek, K. , and Bodnar, A. , 1994, "New method of cutting process transfer function determination ," Second Biennial European Joint Conf. Engineering Systems Design and Research ASME, PD 64-6, pp. 69-75.

17.

Weck, M. , 1985, Handbook of Machine Tools, John Wiley , New York.

18.

Witek, A. and Marchelek, K. , 1988, "Bewegungsgleichungen des Mehrkorpersystems von Werkzeugmschinen mit Verschiebbaren," Baugruppe Umformtechnik 22(5), 205-212.

19.

Wittbrodt, E. , 1978, "Hybrid method of rigid and deformable finite elements ," Mechanics and Computer 1, 101-124 (in Polish).

20.

Wittbrodt, E. , 1983, "Dynamics of system with time-variable configuration using the finite element method," Scientific Works of Technical University of Gdansk 364, 3-128 (in Polish).

21.

Wu, D.W. and Liu, C.R. , 1985, "An analytical model of cutting dynamics: Part I—model building," ASME, Journal of Engineering for Industry B 107, 107-111.

22.

Wu, D.W. and Liu, C.R. , 1985, "An analytical model of cutting dynamics: Part II—verification ," ASME, Journal of Engineering for Industry B 107, 112-118.