The application of repetitive control to the problem ofattenuation of vibration in a class of engineer ing structures excited by periodic disturbances occurring at a fundamental frequency and its integer multiples is examined. The internal model principle is employed to design controllers for a single degree of freedom structure as well as for a Euler-Bernoulli beam. The beam system is examined experimentally.
Den Hartog, J.P., 1956, Mechanical Vibrations, 4th ed., McGraw-Hill, New York.
2.
Francis, B.A. and Wonham, W.M., 1975, "The internal model principle for linear multivariable regulators," Applied Mathematics and Optimization2, 170-194.
3.
Hac, A., 1995, "Repetitive control of bilinear systems with application to semi-active isolation of vibration," International Journal of Control6, 1265-1296.
4.
Hara, S., Yamamoto, Y., Omata, T., and Nakano, M., 1988, "Repetitive control system: A new type servo system for periodic exogenous signals," IEEE Transactions on Automatic Control33, 659-667.
5.
Hillerström, G., 1996, "Adaptive suppression of vibrations—A repetitive control approach," IEEE Transactions on Control Systems Technology4, 72-78.
6.
Inman, D.J., 1989, Vibration With Control, Measurement, and Stability , Prentice Hall, Englewood Cliffs, NJ.
7.
Kempf, C., Messner, W., Tomizuka, M., and Horowitz, R., 1993, "Comparison of Four Discrete-Time Repetitive Control Algorithms ," IEEE Control Systems Magazine13, 48-54.
8.
Meirovitch, L., 1986, Elements of Vibration Analysis, 2d ed., McGraw-Hill, New York.
9.
Messner, W., Horowitz, R., and Kao, W., 1991, "A new adaptive learning rule," IEEE Transactions on Automatic Control36}, 188-197.
10.
Olgac, N., Elmali, H., and Vijayan, S., 1996, "Introduction to the dual frequency fixed delayed resonator ," Journal of Sound and Vibration189, 355-368.
11.
Olgac, N. and Holm-Hansen, B., 1994, "A novel active vibration absorption technique: Delayed resonator," Journal of Sound and Vibration176, 93-104.
12.
Olgac, N. and Holm-Hansen, B., 1995, "Design considerations for delayed-resonator vibration absorbers,"ASCE Journal ofEngineeringMechanics121, 80-89.
13.
Olgac, N. and Hosek, N., 1995, "Active vibration absorption using delayed resonator with relative position measurement," in Vibration Control, Analysis, and Identification: Structural Vibration Control and Isolation, K.-W Want, B. Yang, and J. Q. Sun, eds., DE-Vol. 84-3, ASME, New York, 59-65.
14.
Sidman, M.D., 1988, "Adaptive runout correction system for disk drives ," in Proceedings of the Second International Symposium on Robotics and Manufacturing: Research, Education, and Applications; Albuquerque, NM.
15.
Tomizuka, M., Chew, K., and Yang, W., 1990, "Disturbance rejection through an external model ," ASME Journal of Dynamic Systems, Measurement and Control112, 559-564.
16.
Tomizuka, M., Tsao, T-C., and Chew, K.-K., 1989, "Analysis and synthesis of discrete-time repetitive controller ," ASME Journal of Dynamic Systems, Measurement, and Control111, 353-358.
17.
Tsao, T-C., 1988, Digital Tracking Control and Its Application to Noncircular Machining, Ph.D. dissertation, University of California , Berkeley
18.
Tsao, T-C. and Tomizuka, M., 1994, "Robust adaptive and repetitive digital tracking control and application to a hydraulic servo for noncircular machining," ASME Journal of Dynamic System, Measurement and Control116, 24-32.
