Analysis of the Air-damping Effect on a Micromachined Beam Resonator

Abstract

An analysis of the air-damping effect on the frequency response of a micromachined beam resonator is presented. The motion of the beam is analyzed based on the linear elastic beam theory. The air drag to the beam vibration is characterized based on the Oseen solution of the drag force acting on an infinite long cylinder that moves in incompressible viscous fluids at low Reynolds numbers. The conditions for the validation of this characterization are discussed. The analytical results show that air-damping generally shifts the resonant frequency downward and degrades the quality factor, and that this effect increases as the dimension of the beam decreases. The dependence of this effect on the dimension of the beam is illustrated. The presented analysis provides a simplified analytical approach to estimate the length-scale-dependent air-damping effect for designing high-performance micromachined beam resonators.

Get full access to this article

View all access options for this article.

References

[1] Cleland, A. N. and Roukes, M. L.: Fabrication of high frequency nanometer scale mechanical resonators from bulk Si crystals . Appl. Phys. Lett., 69, 2653-2655 (1996).

[2] Cleland, A. N. and Roukes, M. L.: External control of dissipation in a nanometer-scale radio-frequency mechanical resonator . Sensors Actuators, 72, 256-261 (1999).

[3] Tang, W. C., Nguyen, T.-C. H., and Howe, R. T.: Laterally driven polysilicon resonator microstructures . Sensors Actuators, 20, 25-32 (1989).

[4] Nguyen, C. T.-C. and Howe, R. T.: An integrated CMOS micromechanical resonator high-Q oscillator . IEEE J. Solid-State Circuits, 34, 440-455 (1999).

[5] Cleland, A. N. and Roukes, M. L.: A nanometre-scale mechanical electrometer . Nature, 392, 160-162 (1998).

[6] Yasumura, K. Y., Stowe, T. D., Chow, E. M., Pfafman, T., Kenny, T., Sttipe, B. C., and Rugar, D.: Quality factor in micro- and submicron-thick cantilevers . J. Microelectromech. Syst., 9, 117-125 (2000).

[7] Burns, D. W., Zook, J. D., Horning, R. D., Herb, W. R., and Guckel, H.: Sealed-cavity resonant microbeam pressure sensor . Sensors Actuators, 48, 179-186 (1995).

[8] Burns, D. W., Horning, R. D., Herb, W. R., Zook, J. D., and Guckel, H.: Sealed-cavity resonant microbeam accelerometer . Sensors Actuators, 53, 249-255 (1996).

[9] Newell, W. E.: Miniturization of tuning forks . Science, 161, 1320-1326 (1968).

10.

[10] Zook, J. D., Burns, D. W., Herb, W. R., Guckel, H., Kang, J. W., and Ahn, Y.: Optically excited self-resonant microbeams . Sensors Actuators, 52, 92-98 (1996).

11.

[11] Blom, F. R., Bouwstra, S., Elwenspoek, M., and Fluitman, J. H. J.: Dependence of the quality factor of micromachined silicon beam resonators on pressure and geometry . J. Vac. Sci. Technol., B10, 19-26 (1992).

12.

[12] Timoshenko S. P. and Weaver, W.: Vibration Problems in Engineering, 4th edn, Wiley, New York (1974).

13.

[13] White, F. M.: Viscous Fluid Flow, 2nd, edn, McGraw-Hill, New York (1991).

14.

[14] Tomotika, S. and Aoi, T.: An expansion formula for the drag on a circular cylinder moving through a viscous fluid at small Reynolds number . Q. J. Mech. Appl. Math., 4, 401-406 (1951).

15.

[15] Nayfeh, A. H. and Mook, D. T.: Nonlinear Oscillations, Wiley, New York (1979).

16.

[16] Beatty, M.: Finite amplitude vibration of a neo-Hookean oscillator . Q. Appl. Math., 44, 19-34 (1986).