An extended Hill’s lemma is provided for non-Cauchy continua satisfying the modified couple stress theory in the bulk and the surface elasticity theory in the surface layer. Based on the Hill–Mandel condition, four sets of boundary conditions (BCs) are identified. It is shown that each of these four sets of BCs satisfies the admissibility and average field requirements. In addition, the set of kinetic BCs meets the force and moment balance conditions, and the set of modified kinematic BCs satisfies the displacement and micro-rotation compatibility constraint. By applying the newly extended Hill’s lemma, a homogenization analysis of a two-phase composite is performed, in which the average strain energy of the composite is computed using a finite element model constructed using COMSOL. The effective elastic constants obtained in this analysis are found to satisfy the Voigt and Reuss bounds.
NicotFKruytNPMilletO. On Hill’s lemma in continuum mechanics. Acta Mech2017; 228: 1581–1596.
6.
ForestSDendievelRCanovaGR. Estimating the overall properties of heterogeneous Cosserat materials. Model Simul Mat Sci Eng1999; 7: 829–840.
7.
YuanXTomitaY. Effective properties of Cosserat composites with periodic microstructure. Mech Res Commun2001; 28: 265–270.
8.
LiXLiuQ. A version of Hill’s lemma for Cosserat continuum. Acta Mech Sinica2009; 25: 499–506.
9.
Ostoja-StarzewskiM. Macrohomogeneity condition in dynamics of micropolar media. Arch Appl Mech2011; 81: 899–906.
10.
LiuQ. Hill’s lemma for the average-field theory of Cosserat continuum. Acta Mech2013; 224: 851–866.
11.
LiuQ. A new version of Hill’s lemma for Cosserat continuum. Arch Appl Mech2015; 85: 761–773.
12.
GadAIGaoX-LLiK. A strain energy-based homogenization method for 2-D and 3-D cellular materials using the micropolar elasticity theory. Compos Struct2021; 265: 113594-1–113594-18.
13.
GaoX-L. Extended Hill’s lemma for non-Cauchy continua based on the simplified strain gradient elasticity theory. J Micromech Mol Phys2016; 3: 1640004-1–1640004-13.
14.
GadAIGaoX-L. Extended Hill’s lemma for non-Cauchy continua based on a modified couple stress theory. Acta Mech2020; 231: 977–997.
15.
GadAIGaoX-L. Two versions of the extended Hill’s lemma for non-Cauchy continua based on the couple stress theory. Math Mech Solids2021; 26: 244–262.
16.
CammarataR. Surface and interface stress effects in thin-films. Prog Surf Sci1994; 46: 1–38.
RuCQ. Simple geometrical explanation of Gurtin-Murdoch model of surface elasticity with clarification of its related versions. Sci China Ser G2010; 53: 536–544.
19.
GadAIMahmoudFFAlsohorbagyA, et al. Finite element modeling for elastic nano-indentation problems incorporating surface energy effect. Int J Mech Sci2014; 84: 158–170.
20.
ZhouS-SGaoX-L. Solutions of the generalized half-plane and half-space Cerruti problems with surface effects. Z Angew Math Phys2015; 66: 1125–1142.
21.
GaoX-LZhangGY. A microstructure-and surface energy-dependent third-order shear deformation beam model. Z Angew Math Phys2015; 66: 1871–1894.
22.
SharmaPGantiSBhateN. Effect of surfaces on the size-dependent elastic state of nano-inhomogeneities. Appl Phys Lett2003; 82: 535–537.
23.
DuanHWangJHuangZ, et al. Size-dependent effective elastic constants of solids containing nano-inhomogeneities with interface stress. J Mech Phys Solids2005; 53: 1574–1596.
24.
GurtinMEMurdochAI. A continuum theory of elastic material surfaces. Arch Ration Mech Anal1975; 57: 291–323.
25.
GurtinMEMurdochAI. Surface stress in solids. Int J Solids Struct1978; 14: 431–440.
26.
SteigmannDJOgdenRW. Plane deformations of elastic solids with intrinsic boundary elasticity. Proc R Soc Lond A1997; 453: 853–877.
DuanHWangJKarihalooB, et al. Nanoporous materials can be made stiffer than non-porous counterparts by surface modification. Acta Mater2006; 54: 2983–2990.
29.
YangFChongACMLamDCC, et al. Couple stress based strain gradient theory for elasticity. Int J Solids Struct2002; 39: 2731–2743.
30.
ParkSKGaoX-L. Variational formulation of a modified couple stress theory and its application to a simple shear problem. Z Angew Math Phys2008; 59: 904–917.
KoiterWT. Couple-stresses in the theory of elasticity. Proc K Ned Akad Wet B1964; 67: 17–44.
33.
MindlinRD. Influence of couple-stresses on stress concentrations. Exp Mech1963; 3: 1–7.
34.
ParkSKGaoX-L. Bernoulli-Euler beam model based on a modified couple stress theory. J Micromech Microeng2006; 16: 2355–2359.
35.
ZhangGYGaoX-LWangJZ. A non-classical model for circular Kirchhoff plates incorporating microstructure and surface energy effects. Acta Mech2015; 226: 4073–4085.
36.
GurtinMEWeissmüllerJLarcheF. A general theory of curved deformable interfaces in solids at equilibrium. Philos Mag A1998; 78: 1093–1109.
37.
COMSOL Multiphysics®, version 5.4. Stockholm: COMSOL Inc., 2018.
38.
LamDCCYangFChongACM, et al. Experiments and theory in strain gradient elasticity. J Mech Phys Solids2003; 51: 1477–1508.
39.
ZhangGYGaoX-L. Band gaps for flexural elastic wave propagation in periodic composite plate structures based on a non-classical Mindlin plate model incorporating microstructure and surface energy effects. Contin Mech Thermodyn2019; 31: 1911–1930.
40.
LiuCRajapakseRKND. Continuum models incorporating surface energy for static and dynamic response of nanoscale beams. IEEE Trans Nanotechnol2010; 9: 422–431.
41.
GaoX-LMahmoudFF. A new Bernoulli-Euler beam model incorporating microstructure and surface energy effects. Z Angew Math Phys2014; 65: 393–404.
42.
GaoX-L. A new Timoshenko beam model incorporating microstructure and surface energy effects. Acta Mech2015; 226: 457–474.
AiLGaoX-L. Evaluation of effective elastic properties of 3-D printable interpenetrating phase composites using the meshfree radial point interpolation method. Mech Adv Mater Struct2018; 25: 1241–1251.
