In this paper, we apply a numerical integration strategy recently developed for determining the deformation shapes of structures constituted by Cosserat rods, to predict the behavior of panto-cylinders. Panto-cylinders have, as microstructure, a set of two families of helicoidal beams interconnected by perfect or elastic joints. The pivot’s free rotation axis is, in the reference configuration, orthogonal to the cylindrical surfaces spanned by the beams. We perform a series of numerical simulations looking for the mechanical parameters which exalt the chirality effects in the structure. For the performed compression, extensions, shear, and torsion tests, we find chiral deformation patterns with a dependence on the type of joint and its length.
AlibertJJSeppecherPdell’IsolaF. Truss modular beams with deformation energy depending on higher displacement gradients. Math Mech Solids2003; 8: 51–73.
2.
BarchiesiEdell’IsolaFLaudatoM, et al. A 1D continuum model for beams with pantographic microstructure: asymptotic micro-macro identification and numerical results. In: dell’IsolaFEremeyevVAPorubovA (eds.) Advances in mechanics of microstructured media and structures, vol. 87. Cham: Springer International Publishing, 2018, pp. 43–74, http://link.springer.com/10.1007/978-3-319-73694-5_4
3.
BarchiesiEEugsterSRPlacidiL, et al. Pantographic beam: a complete second gradient 1D-continuum in plane. Z Angew Math Phys2019; 70(5): 135.
dell’IsolaFGiorgioIPawlikowskiM, et al. Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium. Proc R Soc A Eng Sci2016; 472(2185): 20150790http://rspa.royalsocietypublishing.org/lookup/doi/10.1098/rspa.2015.0790
6.
TurcoEGolaszewskiMCazzaniA, et al. Large deformations induced in planar pantographic sheets by loads applied on fibers: experimental validation of a discrete Lagrangian model. Mech Res Commun2016; 76: 51–56, http://www.sciencedirect.com/science/article/pii/S0093641316300702
TurcoEdell’IsolaFCazzaniA, et al. Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models. Z Angew Math Phys2016; 67(4): 85.
9.
YildizdagMEBarchiesiEdell’IsolaF. Three-point bending test of pantographic blocks: numerical and experimental investigation. Math Mech Solids2020; 25(10): 1965–1978.
StilzMPlappertDGutmannF, et al. A 3D extension of pantographic geometries to obtain metamaterial with semi-auxetic properties. Math Mech Solids2022; 27(4): 673–686.
ToupinRA. Theories of elasticity with couple-stress. Arch Ration Mech Anal1964; 17(2): 85–112.
15.
MindlinRDTierstenHF. Effects of couple-stresses in linear elasticity. Arch Ration Mech Anal1962; 11(1): 415–448.
16.
dell’IsolaFCorteADGiorgioI. Higher-gradient continua: the legacy of Piola, Mindlin, Sedov and Toupin and some future research perspectives. Math Mech Solids2017; 22(4): 852–872.
dell’IsolaFEugsterSRFedeleR, et al. Second-gradient continua: from Lagrangian to Eulerian and back. Math Mech Solids2022; 27(12): 2715–2750.
19.
FedeleR. Approach à la Piola for the equilibrium problem of bodies with second gradient energies. Part II: variational derivation of second gradient equations and their transport. Continuum Mech Thermodyn2022; 34: 1087–1111.
20.
BarchiesiEGanzoschGLieboldC, et al. Out-of-plane buckling of pantographic fabrics in displacement-controlled shear tests: experimental results and model validation. Continuum Mech Thermodyn2019; 31(1): 33–45.
21.
TurcoEMisraASarikayaR, et al. Quantitative analysis of deformation mechanisms in pantographic substructures: experiments and modeling. Continuum Mech Thermodyn2019; 31(1): 209–223.
EremeyevVAdell’IsolaFBoutinC, et al. Linear pantographic sheets: existence and uniqueness of weak solutions. J Elast2018; 132(2): 175–196.
24.
EremeyevVAAlzahraniFSCazzaniA, et al. On existence and uniqueness of weak solutions for linear pantographic beam lattices models. Continuum Mech Thermodyn2019; 31(6): 1843–1861.
25.
GutmannFStilzMPatilS, et al. Miniaturization of non-assembly metallic pin-joints by LPBF-based additive manufacturing as perfect pivots for pantographic metamaterials. Materials2023; 16(5): 1797, https://www.mdpi.com/1996-1944/16/5/1797
26.
CiallellaASteigmannDJ. Unusual deformation patterns in a second-gradient cylindrical lattice shell: Numerical experiments. Math Mech Solids2022; 28(1): 141–153.
GiorgioIRizziNAndreausU, et al. A two-dimensional continuum model of pantographic sheets moving in a 3D space and accounting for the offset and relative rotations of the fibers. Math Mech Complex Syst2019; 7: 311–325.
30.
GiorgioI. Lattice shells composed of two families of curved Kirchhoff rods: an archetypal example, topology optimization of a cycloidal metamaterial. Continuum Mech Thermodyn2021; 33: 1063–1082, https://ui.adsabs.harvard.edu/abs/2021CMT....33.1063G
31.
CiallellaAD’AnnibaleFDel VescovoD, et al. Deformation patterns in a second-gradient lattice annular plate composed of “Spira mirabilis” fibers. Continuum Mech Thermodyn2022; 35: 1561–1580.
32.
SteigmannDJ. Equilibrium of elastic lattice shells. J Eng Math2018; 109(1): 47–61.
33.
ShiraniMLuoCSteigmannDJ. Cosserat elasticity of lattice shells with kinematically independent flexure and twist. Continuum Mech Thermodyn2019; 31(4): 1087–1097.
GiorgioI. Numerical identification procedure between a micro-Cauchy model and a macro-second gradient model for planar pantographic structures. Z Angew Math Phys2016; 67(4): 95.
36.
ShekarchizadehNAbaliBEBersaniAM. A benchmark strain gradient elasticity solution in two-dimensions for verifying computational approaches by means of the finite element method. Math Mech Solids2022; 27(10): 2218–2238.
37.
MaurinFGrecoFDesmetW. Isogeometric analysis for nonlinear planar pantographic lattice: discrete and continuum models. Continuum Mech Thermodyn2019; 31(4): 1051–1064, http://link.springer.com/10.1007/s00161-018-0641-y
38.
GrecoL. An iso-parametric G1 -conforming finite element for the nonlinear analysis of Kirchhoff rod. Part I: the 2D case. Continuum Mech Thermodyn2020; 32: 1473–1496, https://ui.adsabs.harvard.edu/abs/2020CMT....32.1473G
LaudatoMManzariLGiorgioI, et al. Dynamics of pantographic sheet around the clamping region: experimental and numerical analysis. Math Mech Solids2021; 26(10): 1515–1537.
BedoyaJMeyerCATimminsLH, et al. Effects of stent design parameters on normal artery wall mechanics. J Biomech Eng2006; 128(5): 757–765.
43.
LewisG. Materials, fluid dynamics, and solid mechanics aspects of coronary artery stents: a state-of-the-art review. J Biomed Mater Res B Appl Biomater2008; 86(2): 569–590.
44.
ZhaoSGuLFroemmingSR. On the importance of modeling stent procedure for predicting arterial mechanics. J Biomech Eng2012; 134(12): 121005.
45.
CianchettiMRanzaniTGerboniG, et al. Soft robotics technologies to address shortcomings in today’s minimally invasive surgery: the STIFF-FLOP approach. Soft Robot2014; 1(2): 122–131, https://www.liebertpub.com/doi/10.1089/soro.2014.0001
GéradinMCardonaA. Flexible multibody dynamics: a finite element approach. 1st ed. New York: Wiley, 2001.
51.
SpagnuoloMScerratoD. The mechanical diode: on the tracks of James Maxwell employing mechanical–electrical analogies in the design of metamaterials. In: AbaliBEGiorgioI (eds) Developments and novel approaches in biomechanics and metamaterials (Advanced structured materials). Cham: Springer International Publishing, pp. 459–469.
