The effects of the partial replacement of maltodextrin by native agave fructans on the characteristics of spray-dried pineapple and mango powder were evaluated in this study. An experimental 33 design, three concentrations of maltodextrin (5, 7, and 10%), three concentrations of native agave fructans (0, 2, and 4%), and three feed temperatures (110, 115, and 120 ℃) were used. The results using the treatment in which only maltodextrin was used as a reference indicated that an increment in the inlet temperature decreases the moisture content, aw, and solubility. Likewise, an increase (more than 2%) in fructans concentration generates products with increased aw, moisture, hygroscopicity, wettability, and greater solubility. Additionally, no modification of storage stability was observed. Mango and pineapple powder color were affected mainly by the inlet temperature, causing an increase in luminosity (L*) and a decrease in parameter (a*). A scanning electron microscopy showed spherical powder particles with certain contractions; powder stability in treatments with native agave fructans was not modified in the treatment at 2%. Finally, the addition of 2% agave fructans as carrier material was able to reduce the maltodextrin concentration of the spray drying process.
AbadioFDBDominguesAMBorgesSVOliveiraVM (2004) Physical properties of powdered pineapple (Ananas comosus) juice – Effect of malt dextrin concentration and atomization speed. Journal of Food Engineering64(3): 285–287.
2.
AhmedMAkterMSEunJB (2010) Impact of α-amylase and maltodextrin on physicochemical, functional and antioxidant capacity of spray-dried purple sweet potato flour. Journal of the Science of Food and Agriculture90(3): 494–502.
3.
Al-kahtaniHAHassanBH (1990) Spray drying of Roselle (Hibiscus sabdariffa L.) extract. Journal of Food Science55(4): 1073–1076.
4.
Araujo-DíazSBLeyva-PorrasCAguirre-BañuelosPÁlvarez-SalasCSaavedra-LeosZ (2017) Evaluation of the physical properties and conservation of the antioxidants content, employing inulin and maltodextrin in the spray drying of blueberry juice. Carbohydrate Polymers167: 317–325.
5.
ArrazolaGHerazoIAlvisA (2014) Microencapsulación de Antocianinas de Berenjena (Solanum melongena L.) mediante secado por aspersión y evaluación de la estabilidad de su color y capacidad antioxidante. Información Tecnológica25(3): 31–42.
6.
AvaltroniFBouquerandPENormandV (2004) Maltodextrin molecular weight distribution influence on the glass transition temperature and viscosity in aqueous solutions. Carbohydrate Polymers58(3): 323–334.
7.
Behboudi-JobbehdarSSoukoulisCYonekuraLFiskI (2013) Optimization of spray-drying process conditions for the production of maximally viable microencapsulated L. acidophilus NCIMB 701748. Drying Technology31(11): 1274–1283.
8.
BhandariBRDattaNHowesT (1997) Problems associated with spray drying of sugar-rich foods. Drying Technology15(2): 671–684.
9.
BhandariBRSenoussiADumoulinEDLebertA (1993) Spray drying of concentrated fruit juices. Drying Technology11(5): 1081–1092.
10.
BizotHLe BailPLerouxBDavyJRogerPBuleonA (1997) Calorimetric evaluation of the glass transition in hydrated, linear and branched polyanhydroglucose compounds. Carbohydrate Polymers32(1): 33–50.
11.
BorgesSVReisALSHJorgeECPintoPROliveieraVM (2002) Jugo de frutas tropicales deshidratado por “spray drying”. Alimentaria334: 125–130.
12.
CaiYZCorkeH (2000) Production and properties of spray-dried amaranthus betacyanin pigments. Journal of Food Science65(7): 1248–1252.
13.
CaliskanGDirimSN (2016) The effect of different drying processes and the amounts of maltodextrin addition on the powder properties of sumac extract powders. Powder Technology287: 308–314.
14.
Cano-ChaucaMStringhetaPCRamosAMCal-VidalJ (2005) Effect of the carriers on the microstructure of mango powder obtained by spray drying and its functional characterization. Innovative Food Science and Emerging Technologies6(4): 420–428.
15.
CaparinoOATangJNindoCISablaniSSPowersJRFellmanJK (2012) Effect of drying methods on the physical properties and microstructures of mango (Philippine ‘Carabao’ var.) powder. Journal of Food Engineering111(1): 135–148.
16.
ChangMCMorrisWC (1990) Effect of heat treatments on chemical analysis of dietary fiber. Journal of Food Science55(6): 1647–1650.
17.
Chávez-RodríguezAFarias-CervantesVSLuna-SolanoGChávez-RodríguezAMOrtíz-BasultoRIAndrade-GonzálezI (2016) Quality attributes and particles deposition of spray dried fructans of blue agave juice. Revista Mexicana de Ingeniería Química15(2): 493–502.
18.
Chávez-RodríguezALópez-MurairaIGGoméz-LeyvaJFLuna-SolanoGOrtíz-BasurtoRIAndrade-GonzálezI (2014) Optimization of Agave tequilana weber var. Azul juice spray drying process. Journal of Chemistry2014(915941): 1–10.
19.
Crispín-IsidroGLobato-CallerosCEspinosa-AndrewsHAlvarez-RamirezJVernon-CarterEJ (2015) Effect of inulin and agave fructans addition on the rheological, microstructural and sensory properties of reduced-fat stirred yogurt. LWT – Food Science and Technology62(1): 438–444.
20.
DesaiKGHParkHJ (2004) Solubility studies on valdecoxib in the presence of carriers, cosolvents, and surfactants. Drug Development Research62(1): 41–48.
21.
DesobrySANettoFMLabuzaTP (1997) Comparison of spray-drying, drum-drying and freeze-drying for β-carotene encapsulation and preservation. Journal of Food Science62(6): 1158–1162.
22.
Dib Taxi MCA, Santos AB, Menezes HC and Grosso CRF. (2000). Efeito da temperatura de secado e da percentagem de encapsulante no rendimento del jugo de camu-camu (Mirciaria dubia). In: Anais do XVII Congresso Brasileiro de Ciencia e Tecnología de Alimentos, pp.6–113. Fortaleza: SBCTA.
23.
EastmanJEMooreCO. U.S. patent no. 4,465,702.1984Washington, DC: U.S. Patent and Trademark Office.
24.
Espinosa-AndrewsHUrias-SilvasJE (2012) Thermal properties of agave fructans (Agave tequilana Weber var. Azul). Carbohydrate Polymers87(4): 2671–2676.
25.
Farías-CervantesVSDelgado-LinconESolís-SotoAMedrano-RoldanHAndrade-GonzálezI (2016) Effect of spray drying temperature and agave fructans concentration as carrier agent on the quality properties of blackberry powder. International Journal of Food Engineering12(5): 451–459.
26.
FazaeliMEmam-DjomehZAshtariAKOmidM (2012) Effect of spray drying conditions and feed composition on the physical properties of black mulberry juice powder. Food and Bioproducts Processing90(4): 667–675.
27.
FernandesRVDBBorgesSVBotrelDA (2013) Influence of spray drying operating conditions on microencapsulated rosemary essential oil properties. Food Science and Technology33: 171–178.
28.
FernandesRVDBBorgesSVBotrelDASilvaEKCostaJMGDQueirozF (2013) Microencapsulation of rosemary essential oil: Characterization of particles. Drying Technology31(11): 1245–1254.
29.
FreudigBHogekampSSchubertH (1999) Dispersion of powders in liquids in a stirred vessel. Chemical Engineering and Processing: Process Intensification38(4): 525–532.
30.
FuchsMTurchiuliCBohinMCuvelierMEOrdonnaudCPeyrat-MaillardMNet al.(2006) Encapsulation of oil in powder using spray drying and fluidised bed agglomeration. Journal of Food Engineering75(1): 27–35.
31.
FurlánLTRHerreraPAPadillaAPBasurtoRIOCampderrósME (2014) Assessment of agave fructans as lyoprotectants of bovine plasma proteins concentrated by ultrafiltration. Food Research International56: 146–158.
32.
GabasALTelisVRNSobralPJATelis-RomeroJ (2007) Effect of maltodextrin and arabic gum in water vapor sorption thermodynamic properties of vacuum dried pineapple pulp powder. Journal of Food Engineering82(2): 246–252.
33.
González-HerreraSMRutiaga-QuiñonesOMAguilarCNOchoa-MartínezLAContreras-EsquivelJCLópezMGet al.(2016) Dehydrated apple matrix supplemented with agave fructans, inulin, and oligofructose. LWT – Food Science and Technology65: 1059–1065.
34.
GoulaAMAdamopoulosKG (2004) Influence of spray drying conditions on tomato powder properties. Drying Technology22(5): 1129–1151.
35.
GoulaAMAdamopoulosKG (2005) Stability of lycopene during spray drying of tomato pulp. LWT – Food Science and Technology38(5): 479–487.
36.
GoulaAMAdamopoulosKG (2008) Effect of maltodextrin addition during spray drying of tomato pulp in dehumidified air: II. Powder properties. Drying Technology26(6): 726–737.
37.
GoulaAMAdamopoulosKG (2010) A new technique for spray drying orange juice concentrate. Innovative Food Science and Emerging Technologies11(2): 342–351.
38.
GoulaAMKarapantsiosTDAdamopoulosKG (2007) Characterization of tomato pulp stickiness during spray drying using a contact probe method. Drying Technology25(4): 591–598.
39.
HallGMIglesiasO (1997) Functional properties of dried milk whey Propiedades funcionales de suero de leche deshidratado. Food Science and Technology International3(5): 381–383.
40.
JayaSDasH (2004) Effect of maltodextrin, glycerol monostearate and tricalcium phosphate on vacuum dried mango powder properties. Journal of Food Engineering63(2): 125–134.
41.
KawaiKFukamiKThanatuksornPViriyarattanasakCKajiwaraK (2011) Effects of moisture content, molecular weight, and crystallinity on the glass transition temperature of inulin. Carbohydrate Polymers83(2): 934–939.
42.
KilburnDClaudeJMezzengaRDlubekGAlamAUbbinkJ (2004) Water in glassy carbohydrates: Opening it up at the nanolevel. The Journal of Physical Chemistry B108(33): 12436–12441.
43.
Kilian S, Kritzinger S, Rycroft C, Gibson G and Du Preez J. (2002). The effects of the novel bifidogenic trisaccharide, neokestose, on the human colonic microbiota. World Journal of Microbiology and Biotechnology 18(7): 637–644.
44.
Kongsuwan A, Suthiluk P, Theppakorn T, Srilaong V and Setha S. (2009). Bioactive compounds and antioxidant capacities of phulae and nanglae pineapple. Asian Journal Food Agro-Industry 2(Special Issue): S44–S50.
45.
KonopackaD (2006) The effect of enzymatic treatment on dried vegetable color. Drying Technology24(9): 1173–1178.
46.
MaiaABRGolgherM (1983) Parâmetros para avaliação da qualidade de reconstituição do leite em pó desidratado em secador de aspersão (“Spray-Drier”). Boletim SBCTA17(3): 235–254.
47.
Mancilla-MargalliNALópezMG (2006) Water-soluble carbohydrates and fructan structure patterns from agave and dasylirion species. Journal of Agricultural and Food Chemistry54(20): 7832–7839.
48.
Masters K. (1985). Spray Drying Handbook. London: George Godwin Ltd.
49.
MesteMLChampionDRoudautGBlondGSimatosD (2002) Glass transition and food technology: A critical appraisal. Journal of Food Science67(7): 2444–2458.
50.
Morales-Guzmán J, Medina-Torres MG, Andrade-Esquivel E, Guzmán-Maldonado SH and Hernández-López D. (2010). Evaluación de los efectos del secado por aspersión sobre los compuestos fitoquímicos-funcionales y características fisicoquímicas en encapsulados de zarzamora (Rubus spp). In: XII Congreso Nacional de Ciencia y Tecnología de Alimentos, FH1191–FH11923.
51.
NathSSatpathyGR (1998) A systematic approach for investigation of spray drying processes. Drying Technology16(6): 1173–1193.
52.
NolletLMToldráF (2015) Handbook of Food Analysis, 3rd ed. Two Volume Set. New York: CRC Press.
53.
Ochoa-MartínezLAGonzález-HerreraSMMorales-CastroJRocha-GuzmánNETrancoso-ReyesNUrbina-MartinezMJ (2011) Propiedades de rehidratación y funcionales de un producto en polvo a base de jugo de granada y manzana. Ciencia@ UAQ4(2): 19–25.
54.
Ortiz-BasurtoRIRubio-IbarraMERagazzo-SánchezJABeristainCIJimenez-Fernandez (2017) Microencapsulation of Eugenia uniflora L. juice by spray drying using fructans with different degrees of polymerization. Carbohydrate Polymers175: 603–609.
55.
Perkins-VeaziePCollinsJKPairSDRobertsW (2001) Lycopene content differs among red-fleshed watermelon cultivars. Journal of the Science of Food and Agriculture81(10): 983–987.
56.
PhanindrakumarHSRadhakrishnaKMaheshSJagannathJHBawaAS (2005) Effect of pretreatments and additives on the thermal behavior and hygroscopicity of freeze-dried pineapple juice powder. Journal of Food Processing and Preservation29(5–6): 307–318.
57.
Pisecky J. (1980). Bulk density of milk powders. Australian Journal of Dairy Technology 35(3): 106–111.
58.
Rodríguez-HernándezGRGonzález-GarcíaRGrajales-LagunesARuiz-CabreraMAAbud-ArchilaM (2005) Spray-drying of cactus pear juice (Opuntia streptacantha): Effect on the physicochemical properties of powder and reconstituted product. Drying Technology23(4): 955–973.
59.
Roos Y. (2003). Thermal analysis, state transitions and food quality. Journal of Thermal Analysis and Calorimetry 71(1): 197–203.
60.
RosenbergMKopelmanIJTalmonY (1985) A scanning electron microscopy study of microencapsulation. Journal of Food Science50(1): 139–144.
61.
Ruiz-MontañezGRagazzo-SánchezJACalderón-SantoyoMVelazquez-De La CruzGde LeónJRNavarro-OcañaA (2014) Evaluation of extraction methods for preparative scale obtention of mangiferin and lupeol from mango peels (Mangifera indica L.). Food Chemistry159: 267–272.
62.
SablaniSSShresthaAKBhandariBR (2008) A new method of producing date powder granules: Physicochemical characteristics of powder. Journal of Food Engineering87(3): 416–421.
63.
Schaller-PovolnyLASmithDELabuzaTP (2000) Effect of water content and molecular weight on the moisture isotherms and glass transition properties of inulin. International Journal of Food Properties3(2): 173–192.
64.
TelisVRNMartínez-NavarreteN (2009) Collapse and color changes in grapefruit juice powder as affected by water activity, glass transition, and addition of carbohydrate polymers. Food Biophysics4(2): 83–93.
65.
TongHHWongSYLawMWChuKKChowAH (2008) Anti-hygroscopic effect of dextrans in herbal formulations. International Journal of Pharmaceutics363(1): 99–105.
66.
TononRVBrabetCHubingerMD (2008) Influence of process conditions on the physicochemical properties of açai (Euterpe oleraceae Mart.) powder produced by spray drying. Journal of Food Engineering88(3): 411–418.
67.
ValdugaELimaLdo PradoRPadilhaFFTreichelH (2008) Extração, secagem por atomização e microencapsulamento de antocianinas do bagaço da uva isabel (Vitis labrusca). Ciência e Agrotecnologia32(5): 1568–1574.
68.
Zamora-GasgaVMBello-PérezLAOrtíz-BasurtoRITovarJSáyago-AyerdiSG (2014) Granola bars prepared with agave tequilana ingredients: Chemical composition and in vitro starch hydrolysis. LWT – Food Science and Technology56(2): 309–314.
69.
Zimeri JE and Kokini JL. (2002). The effect of moisture content on the crystallinity and glass transition temperature of inulin. Carbohydrate Polymers 48(3): 299–304.
