Analysis of Selected Water Absorption Coefficient Measurements

Abstract

For isotropic materials with a significant fraction of micro-pores, the cumulative water intake per unit of inflow surface area typically yields a linear function of the square root of time elapse. The authors postulate that this dependence has a limited range of validity. The validity of this approximation starts from an initial period that is inversely proportional to the rate of water intake and ends much before the material reaches the capillary moisture content.

Experimental investigation presented here uses a differential presentation of the cumulative water inflow and clearly indicates that material such as calcium silicate or brick belong to a broad class of materials characterized by a constant water absorption coefficient (A-coefficient). Initial period varies from ½ to 4 minutes. On the other hand, materials with a multiple pore-system such as an Aerated Autoclaved Concrete (AAC) may display a systematically varying A-coefficient. Authors propose a test procedure limited to 1-hour duration that can be used to derive a practical and reproducible value of A-coefficient.

Keywords

free water intake water intake test cumulative water intake water absorption coefficient A-coefficient imbibition process capillary water flows capillary moisture content

Get full access to this article

View all access options for this article.

References

Alexanderson, J. (1979). Relations Between Structure and Mechanical Properties of Autoclave Aerated Concrete , Cem. Concr. Res., 9: 507–514 .

Bomberg, M.T. (1990). Scaling Factors in Aging of Gas-filled Cellular Plastics , J. Therm. Insul., 13: 149–159 .

Descamps, F. (1997). Continuum and Discrete Modelling of Isothermal Water and Air Transfer in Porous Media, PhD-dissertation, K.U.LEUVEN, Belgium.

Hamilton, A. and Hall, C. (2003). Composition and Additional Characterisation of Calcium Silicate Material: Revision with New Data, HAMSTAD-project, Work Document, University of Edinburgh, UK .

Huang, Y. (2003). Ruggedness Test of Water Absorption in AAC, Project in Building Materials Class B 6221 (Prof. Bomberg), Concordia University .

Kooi, J.v.d. (1971). Moisture Transport in Cellular Concrete Roofs, PhD Thesis, TU Eindhoven, The Netherlands.

Liu, Ch. (2003). Ruggedness Test of Water Absorption in AAC, Project in Building Materials Class B 6221 (Prof. Bomberg), Concordia University .

Pazera, M. (2004), Determination of Absorption Coefficient and Capillary Water Content from Free Water Intake Tests, Project for Class in Modeling Indoor Environment (Prof. Zhang), Syracuse University .

Prim, P. and Witmann, F.H. (1983). Structure and Water Absorption of Aerated Concrete, In: Wittmann, F.H. (ed.), Autoclaved Aerated Concrete, Moisture and Properties, pp. 55–69, Elsevier, Amsterdam .

10.

Roels, S. , Sermijn, J. and Carmeliet, J. (2002). Modelling Unsaturated Moisture Transport in Autoclaved Aerated Concrete: A Microstructural Approach , In: Gustavsen, A. and Thue, J.V. (eds), Building Physics in the Nordic Countries. Proceedings of the 6th Symposium, Trondheim, 2002, Norwegian Building Res. Inst. and Norwegian U. of Science and Technology, Norway, June 17–19.

11.

Roels, S. , Carmeliet, J. and Hens, H. (2003). HAMSTAD, WP1: Final Report Moisture Transfer Properties and Materials Characterisation, February 2003, K.U.LEUVEN , Belgium .

12.

Roels, S. , Carmeliet, J. , Hens, H. , Adan, O. , Brocken, H. , Cerny, R. , Pavlik, Z. , Hall, C. , Kumaran, K. , Pel, L. and Plagge, R. (2004). Interlaboratory Comparison of Hygric Properties of Porous Building Materials , Journal of Th. Env. and Bld. Sci., 27(4): 307–325 .

13.

Tada, S. and Nakano, S. (1983). Microstructural Approach to Properties of Moist Cellular Concrete, In: Wittmann, F.H. (ed.), Autoclaved Aerated Concrete, Moisture and Properties, pp. 71–89, Elsevier, Amsterdam .