Effect of Microballoon Radius Ratio on Syntactic Foam Core Sandwich Composites

Abstract

Hollow particles, called microballoons, are commonly used in the fabrication of syntactic foams, which are used as core materials in sandwich composites. The present experimental investigation aims at characterizing five different types of syntactic foam core sandwich composites for their edgewise compressive strength. The microballoon volume fraction is maintained at 0.65 in each type of syntactic foams. The five types of microballoons used in the study have the same mean outer diameter of about 40 mm but different wall thickness causing a difference in their densities and strengths. The differences in the compressive strength and modulus of sandwich composites are related to the microballoon radius ratio, which is defined as the ratio of the internal to the external radii of the microballoons. It is observed that the compressive strength and modulus of syntactic foams increase with a decrease in the microballoon radius ratio. The specimen fracture features are also discussed.

Keywords

syntactic foam microballoon sandwich composite radius ratio compression

Get full access to this article

View all access options for this article.

References

Shutov, F.A. (1991). Syntactic Polymeric Foam, In: Handbook of Polymeric Foams and foam Technology, pp. 355–374, Carl Hanser Verlag, New York .

Gupta, N. , Karthikeyan, C.S. , Sankaran, S. and Kishore (1999). Correlation and Processing Methodology to the Physical and Mechanical Properties of Syntactic Foams with and without Fibers , Mater. Charact., 43(4): 271–277 .

Ishai, O. , Hiel, C. and Luft, M. (1995). Long Term Hygrothermal Effects on Damage Tolerance of Hybrid Composite Sandwich Panels , Composites, 26(1): 47–55 .

Karthikeyan C.S. , Kishore and Sankaran S. (2001). Effect of Absorption in Aqueous and Hygrothermal Media on the Compressive Properties of Glass Fiber Reinforced Syntactic Foam , J. Reinf. Plast. Compos., 20(11): 982–993 .

Hodge, A.J. , Kaul, R.K. and McMahon, W.M. (2000). Sandwich Composite, Syntactic Foam Core Based Applications for Space Structures , In: 45th Int. SAMPE Symposium, pp. 2293–2304 .

Gupta, N. , Kishore and Sankaran, S. (1999). On the Characterization of Syntactic Foam Core Sandwich Composites for Compressive Properties , J. Reinf. Plast. Compos., 18(14): 1347–1357 .

Gupta, N. , Woldesenbet, E. , Kishore and Sankaran S. (2002). Response of Syntactic Foam Core Sandwich Structured Composites to Three-point Bending , J. Sand. Struct. Mater., 4(3): 249–272 .

Bardella, L. and Genna, F. (2001). Elastic Design of Syntactic Foamed Sandwiches Obtained by Filling of Three-dimensional Sandwich Fabric Panels , Int. J. Solids Struct., 38: 307–333 .

Corigliano, A. , Rizzi, E. and Papa, E. (2000). Experimental Characterization and Numerical Simulation of a Syntactic Foam/Glass-fiber Composite Sandwich , Compos. Sci. Technol., 60: 2169–2180 .

10.

Gupta, N. , Kishore , Woldesenbet, E. and Sankaran, S. (2001). Studies on Compressive Failure Features in Syntactic Foam Material , J. Mater. Sci., 36(18): 4485–4491 .

11.

Karthikeyan, C.S. , Sankaran S. , Jagdish Kumar, M.N. and Kishore (2001). Processing and Compressive Strengths of Syntactic Foams with and without Fibrous Reinforcements , J. Appl. Poly. Sci., 81: 405–411 .

12.

Rizzi, E. , Papa, E. and Corigliano, A. (2000). Mechanical Behavior of a Syntactic Foam: Experiments and Modeling , Int. J. Solids Stru., 37: 5773–5794 .

13.

Kim, H.S. and Khamis, M.A. (2001). Fracture and Impact Behaviors of Hollow Microsphere/Epoxy Resin Composites , Composites: Part A, 32: 1311–1317 .

14.

Kim, H.S. and Oh, H.H. (2000). Manufacturing and Impact Behavior of Syntactic Foam , J. Appl. Poly. Sci., 76: 1324–1328 .

15.

Wouterson, E.M. , Boey, F.Y.C. , Hu, X. and Wong, S.C. (2004). Fracture and Impact Toughness of Syntactic Foams , J. Cellular Plast., 40: 145–154 .

16.

Gupta, N. , Woldesenbet, E. and Kishore (2002). Compressive Fracture Features of Syntactic Foams – Microscopic Examination , J. Mater. Sci., 37(15): 3199–3209 .

17.

Gupta, N. and Woldesenbet, E. (2002). Microscopic Studies of Syntactic Foams Tested Under Three-point Bending Conditions , In: Proceedings of ETCE-2002, Houston, TX.

18.

d'Almeida, J.R.M. (1999). An Analysis of the Effect of the Diameter of Glass Microspheres on the Mechnical Behavior of Glass Microsphere/Epoxy-resin Composites , Compos. Sci. Technol., 59: 2087–2091 .

19.

Gupta, N. and Woldesenbet, E. (2004). Compression Properties of Syntactic Foams: Effect of Cenosphere Radius Ratio and Specimen Aspect Ratio , Composites: Part A, 35: 103–111 .

20.

Torquato, S. , Turskett, T.M. and Debenedetti, P.G. (2000). Is Random Close Packing of Spheres Well Defined? Phy. Rev. Let., 84(10): 2064–2067 .

21.

Gupta, N. and Woldesenbet, E. (2001). Stress Concentration Factor Approach to Analyze the Deformation and Fracture Behavior of Particulate Composites , In: Proceedings of ASC 16th Annual Conference, American Society for Composites, Blacksburg, VA.

22.

Gupta, N. and Woldesenbet, E. (2002). Effect of Radius Ratio Parameter of Cenospheres on the Compressive Properties of the Syntactic Foams , In: Proceedings of ASC 17th Annual Conference, American Society for Composites, West Lafayette, IN.