Behavior of Sandwich Plates Reinforced with Polyurethane/Polyurea Interlayers under Blast Loads

Abstract

In this study, the behavior of conventional and modified sandwich plate designs subjected to blast loads is examined with the finite element method. The conventional sandwich design consists of thin outer (loaded side) and inner facesheets made of fibrous laminates, separated by a layer of structural foam core. In the modified designs, a thin ductile interlayer is inserted between the outer facesheet and the foam core. Two materials are selected for the interlayers; one is rate-independent, hyperelastic (polyurethane, PUR), and the other is rate and pressure-dependent, elastic—plastic (polyurea). A comparison is made between the two enhanced designs and the conventional design during an extended time period of 5.0 ms under an exponential pressure impulse lasting for 0.05 ms, and has a peak pressure of 100 MPa. Results show that utilizing PUR or polyurea to separate the outer facesheet and the foam core leads to a much reduced core compression, facesheet vibration, and overall deflection compared to the conventional design. Similar reductions are found in the kinetic energy and the stored and dissipated strain energy. This is attributed to the ability of the interlayers to store energy and shield the inner foam by exhibiting great stiffness under pressure. Although strain rates as high as 10⁴ s^—1 are produced by the blast pressure impulse in the sandwich plates, the strains in both the PUR and the polyurea interlayers are relatively small. This leads to generally similar responses for the two interlayer types, with the initially stiffer PUR providing a slightly better protection for the foam core.

Keywords

sandwich plates multispan blast load polyurethane polyurea finite elements.

Get full access to this article

View all access options for this article.

References

Dvorak, G.J. and Suvorov, A.P. (2006). Protection of Sandwich Plates from Low-velocity Impact, Journal of Composite Materials (to appear).

Suvorov, A.P. and Dvorak, G.J. (2005). Enhancement of Low-velocity Impact Resistance of Sandwich Plates, International Journal of Solids and Structures, 42: 2323—2344.

Suvorov, A.P. and Dvorak, G.J. (2005). Dynamic Response of Sandwich Plates to Medium-velocity Impact, Journal of Sandwich Structures and Materials, 7: 395—412.

Dvorak, G.J. and Bahei-El-Din, Y.A. (2005). Enhancement of Blast Resistance of Sandwich Plates, In: Proceedings of the 7th International Conference on Sandwich Structures, Aalborg University, Aalborg, Denmark, 29—31 August 2005.

Nemat-Nasser, S. (2004). Experimental Characterization of Polyurea with Constitutive Modeling and Simulation, In: Proceedings of ONR, ERC, ACTD Workshop, MIT, Cambridge, Massachusetts, November 2004.

Yi, J. and Boyce, M. (2004). Stress—Strain Behavior of Polyurea and Polyurethane: Preliminary Experiments and Modeling Results, In: Proceedings of ONR, ERC, ACTD Workshop, MIT, Cambridge, Massachusetts, November 2004.

Sun, C.T. and Wu, C.L. (1991). Low Velocity Impact of Composite Sandwich Panels , In: Proceedings of 32nd AIAA/ASME/ASCE Structures, Structural Dynamics and Materials Conference, pp. 1123—1129.

Blatz, P.J. and Ko, W.L. (1962). Application of Finite Element Theory to the Deformation of Rubbery Materials, Transactions of the Society of Rheology , 6: 223—251.

Fleck, N.A. (2004). Collapse Mechanisms of Sandwich Beams with Composite Faces and Foam Core, Loaded in Three-point Bending. Part II: Experimental Investigation and Numerical Modeling, International Journal of Mechanical Sciences, 46: 585—608.

10.

Low, H.Y. and Hao, H. (2001). Reliability Analysis of Reinforced Concrete Slabs Under Explosive Loading, Structural Safety, 23: 157—178.

11.

Gantes, C.J. and Pnevmatikos, N.G. (2004). Elastic-plastic Response Spectra for Exponential Blast Loading, International Journal of Impact Engineering, 30: 323—343.

12.

Brode, H.L. (1955). Numerical Solution of Spherical Blast Waves, Journal of Applied Physics, 26: 766—775.

13.

Lstc (2003). LS-Dyna 970, Livermore Software Technology Corporation , Livermore, CA 94550.