Homogenization and Optimization of Sinusoidal Honeycomb Cores for Transverse Shear Stiffness

Abstract

Fiber-reinforced polymer (FRP) composite sandwich panels with a core of sinusoidal geometry have been recently used in highway bridge and aquaculture tank applications. The selection of geometric shape and size of sinusoidal cores to meet given design requirements is critical in efficient applications of sandwich structures, and their effective transverse shear stiffness properties are important material properties in analysis and design. Based on a combined homogenization and multi-objective optimization technique, the effective transverse shear stiffness properties of sinusoidal cores are studied and optimized. An analytical approach using two-scale homogenization technique is used to predict the effective transverse shear stiffness properties of thin-walled sinusoidal honeycomb cores. The optimization problem is then solved using a sequential quadratic programming algorithm. Two types of optimization problems are presented: the maximization of effective transverse shear stiffness of honeycomb core with a given composite solid volume fraction and the minimization of composite solid volume with prescribed effective transverse shear stiffness. The geometric effects and weighting factors on the optimal design of sinusoidal cores are discussed. An optimization procedure using a response surface method and finite element analysis is also conducted to verify the proposed approach. The present combined homogenization and multi-objective optimization approach can be used to obtain favorable material performance behaviors and meet desired design requirements for honeycomb core structures.

Keywords

fiber-reinforced polymer composites homogenization optimization transverse shear stiffness sinusoidal honeycomb cores thin-walled structures sandwich construction.

Get full access to this article

View all access options for this article.

References

Noor, A. , Burton, W.S. and Bert, C.W. (1994). Computational Models for Sandwich Panels and Shells , Applied Mechanics Review, 49(3): 155-199.

Plunkett, J.D. (1997). Fiber-Reinforcement Polymer Honeycomb Short Span Bridge for Rapid Installation, The National Cooperative Highway Research Program's Innovations Deserving Exploratory Analysis (NCHRP-IDEA) Project Report, November.

Davalos, J.F. , Qiao, P.Z. , Xu , X.F. , Robinson, J. and Barth, K.E. (2001). Modeling and Characterization of Fiber-reinforced Plastic Honeycomb Sandwich Panels for Highway Bridge Applications , Composite Structures , 52(3-4): 441-452.

Xu, X.F. , Qiao, P.Z. and Davalos, J.F. (2001). Transverse Shear Stiffness of Honeycomb Core with General Configurations, Journal of Engineering Mechanics, ASCE, 127(11): 1144-1151.

Qiao, P.Z. and Wang, J.L. (2005). Mechanics of Composite Sinusoidal Honeycomb Cores , Journal of Aerospace Engineering, 18(1): 42-50.

He, Y.H. and Aref, A.J. (2003). An Optimization Design Procedure for Fiber Reinforced Polymer Web-core Sandwich Bridge Deck Systems , Composite Structures, 60(2): 183-195.

Wicks, N. and Hutchinson, J.W. (2001). Optimal Truss Plates, International Journal of Solids and Structures, 38(30-31): 5165-5183.

Liu, T. , Deng, Z.C. and Lu, T.J. (2006). Design Optimization of Truss-cored Sandwiches with Homogenization, International Journal of Solids and Structures , 43(25-26): 7891-7918.

Wei, Z. , Zok, F.W. and Evans, A.G. (2006). Design of Sandwich Panels with Prismatic Cores, Journal of Engineering Materials and Technology - Trans., ASME, 128(2): 186-192.

10.

Davalos, J.F. , Qiao, P.Z. and Barbero, E.J. (1996). Multiobjective Material Architecture Optimization of Pultruded FRP I-Beams , Composite Structures, 35(3): 271-281.

11.

Qiao, P.Z. , Davalos, J.F. and Barbero, E.J. (1998). Design Optimization of Fiber-reinforced Plastic Composite Shapes, Journal of Composite Materials, 32(2): 177-196.

12.

Sigmund, O. and Torquato, S. (1997). Design of Materials with Extreme Thermal Expansion using a Three-Phase Topology Optimization Method , Journal of the Mechanics and Physics of Solids, 45(6): 1037-1067.

13.

Neves, M.M. , Rodrigues, H. and Guedes, J.M. (2000). Optimal Design of Periodic Linear Elastic Microstructures, Computers and Structures, 76(1-3): 421-429.

14.

Nishiwaki, S. , Frecker, M.Z. , Min , S. and Kikuchi, N. (1998). Topology Optimization of Compliant Mechanisms using the Homogenization Method , International Journal of Numerical Methods in Engineering , 42(3): 535-559.

15.

Hassani, B. and Hinton, E. (1998). A Review of Homogenization and Topology Optimization III - Topology Optimization using Optimality Criteria , Computers and Structures, 69(6): 739-756.

16.

Qiao, P.Z. and Wang, J.L. (2005). Transverse Shear Stiffness of Composite Honeycomb Cores and Efficiency of Material, Mechanics of Advanced Materials and Structures, 12(2): 159-172.

17.

Kalamkarov, A.L. (1992). Composite and Reinforced Elements of Construction , Wiley, New York, NY.

18.

Parton, V.Z. and Kudryavtsev, B.A. (1993). Engineering Mechanics of Composite Structures, CRC Press, Boca Raton, FL.

19.

Chen, A. and Davalos, J.F. (2007). Transverse Shear Including Skin Effect for Composite Sandwich with Honeycomb Sinusoidal Core, Journal of Engineering Mechanics, ASCE, 133(3): 247-256.

20.

Jones, R.M. (1975). Mechanics of Composite Materials, Hemisphere Publishing Corporation, New York, NY.

21.

Haftka, R.T. and Gurdal, Z. (1992). Elements of Structural Optimization, Kluwer Academic Publisher, Dordrecht.

22.

Fletcher, R. (1987). Practical Methods of Optimization, John Wiley and Sons, New York, NY.

23.

Abaqus (2007). ABAQUS Analysis User's Manual, Version 6.7. HKS, Inc., Providence, R.I.

24.

Box, G.E.P. and Draper, N.R. (1987). Empirical Model-Building and Response Surfaces, John Wiley & Sons, New York, NY.

25.

Abaqus (2007). ABAQUS Scripting User's Manual, Version 6.7. HKS, Inc. , Providence, R.I.