Thermal sensitivity and relaxation of carbon fibre-foam sandwich composites with fibre optic sensors

Abstract

The increasing use of sandwich composites for structural applications brings with it a need to establish a reliable inspection and monitoring method to ensure structural integrity and safe operation throughout the service life. Since optical fibre-based photonic sensing technologies are increasingly common for structural health monitoring of composite structures, selection of optical fibre Bragg grating sensors could be one possible choice for this purpose. In this paper, performance characterisation of sandwich composite with embedded silica fibre Bragg grating sensor is reported. Experimental tests were performed on a carbon fibre foam core sandwich composite embedded with a silica fibre Bragg grating sensor to extract the structural health monitoring parameters such as strain and temperature. The current study found that sandwich composite exhibits foam relaxation; however, its impact on strain measurement is negligible. Another important finding from the theoretical and the experimental thermal modelling was that although the constituent components of the sandwich composite have entirely different thermal expansion coefficients, its effect on the embedded fibre sensor can be minimal if the sensors are embedded between the face sheets. These results can initiate further research in this area and can lead to the development of state-of-the art structural health monitoring techniques for sandwich composite structures.

Keywords

Sandwich composite laminates fibre Bragg grating structural health monitoring thermal sensitivity foam relaxation

Get full access to this article

View all access options for this article.

References

Kim JK, Wo DZ, Zhou LM, et al. Advances in composite materials and structures. In: 5th Asian-Australasian conference on composite materials. Hong Kong, China, 27–30 November 2006.

Deo RB, Starnes JH and Holzwarth RC. Low-cost composite materials and structures for aircraft applications. In: RTO AVT specialists meeting on low cost composite structures. Norway, 7–11 November 2001.

Sokolinsky

Shen

Vaikhanski

. Experimental and analytical study of nonlinear bending response of sandwich beams. Compos Struct 2003; 60: 219–229.

E.MASTERS

. Damage detection in composite materials, Philadelphia, PA: ASTM, 1992.

Prakash

Mohan

Rajadurai

. Low velocity impact behaviour of glass fabric/epoxy honeycomb core sandwich composites. Sci Eng Compos Mater 2015; 22: 525–538.

Maldague

. Theory and practice of infrared technology for nondestructive testing, 1st ed. New York: John Wiley & Sons, 2001, pp. 684–684.

Méndez A and Graver T. Overview of fiber optic sensors for NDT applications. In: IV NDT Pan American conference, Buenos Aires, Argentina, 22–27 October 2007.

Shadmehri F, Ioachim O, Pahud O, et al. Laser-vision inspection system for automated fiber placement (AFP) process. In: 20th international conference on composite materials, Copenhagen, Denmark, 19–24 July 2015.

Senthil

Arockiarajan

Palaninathan

. Defects in composite structures: its effects and prediction methods – a comprehensive review. Compos Struct 2013; 106: 139–149.

10.

Bolotin

. Delaminations in composite structures: its origin, buckling, growth and stability. Compos B Eng 1996; 27: 129–145.

11.

López-Higuera

Cobo

Quintela Incera

. Fiber optic sensors in structural health monitoring. Light Wave Technol 2011; 29: 587–608.

12.

Błażejewski W, Gąsior P and Kaleta J. Application of optical fibre sensors to measuring the mechanical properties of composite materials and structures. In: Brahim Attaf (ed.) Advances in composite materials – ecodesign and analysis. Rijeka, Croatia: In Tech, 2011, pp.221–246.

13.

Majumder

Gangopadhyay

Chakraborty

. Fibre Bragg gratings in structural health monitoring – present status and applications. Sensors Actuators A 2008; 147: 150–164.

14.

Hackney

Peters

. Damage identification after impact in sandwich composites through embedded fiber Bragg sensors. Intel Mater Syst Struct 2011; 22: 1305–1316.

15.

Minakuchi

Yamauchi

Takeda

. Detecting an arrested crack in a foam-core sandwich structure using an optical fiber sensor embedded in a crack arrester. Adv Compos Mater 2011; 20: 419–433.

16.

Minakuchi

Okabe

Takeda

. Real-time detection of debonding between honeycomb core and facesheet using a small-diameter FBG sensor embedded in adhesive layer. Sandwich Struct Mater 2007; 9: 19–28.

17.

Oromiehie E, Prusty GB, Compston P, et al. Structural health monitoring and processing of composites using photonic sensing technology. In: 20th international conference on composite materials, Copenhagen, Denmark, 19–24 July 2015.

18.

Murukeshan

Chan

Ong

. Cure monitoring of smart composites using Fiber Bragg Grating based embedded sensors. Sensors Actuators A 2000; 79: 153–161.

19.

Leng

Asundi

. Structural health monitoring of smart composite materials by using EFPI and FBG sensors. Sensors Actuators A 2003; 103: 330–340.

20.

Ruzek

Kudrna

Kadlec

. Strain and damage monitoring in CFRP fuselage panels using fiber Bragg grating sensors. Part II: mechanical testing and validation. Compos Struct 2014; 107: 737–744.

21.

Rajan G, Darminanb E, Penga G-D, et al. Carbon fibre-foam sandwich composite laminate embedded with fiber Bragg grating sensors. In: 23rd international conference on optical fibre sensors. Santander, Spain, 2–4 June 2014.

22.

Oromiehie E, Rajan G, Compston P, et al. Performance characterization of sandwich composite laminates embedded with fibre Bragg grating sensors. In: The 8th Australasian congress on applied mechanics ACAM 8. Melbourne, Australia, 23–26 2014, Barton, ACT: Engineers Australia, pp.904–911.

23.

Ginu

Ramakrishnan

Semenova

. Experimental study and analysis of a polymer fiber Bragg grating embedded in a composite material. J Light Wave Technol 2014; 12: 1726–1733.

24.

Ramakrishnan

Rajan

Semenova

. Hybrid fibre optic sensor system for measuring the strain, temperature and thermal strain of composite materials. IEEE Sensors J 2014; 14: 2571–2578.

25.

ASTM Standard D790-10. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials, West Conshohocken: United States: ASTM, 2010.

26.

Minakuchi

Uezona

Takeda

. Formation and relaxation of residual facesheet dent on foam-core sandwich structures by localized transverse loading. J Sandwich Struct Mater 2012; 15: 71–91.