Interfacial delamination in glass-fiber/polymer-foam-core sandwich composites using singlemode–multimode–singlemode optical fiber sensors: Identification based on experimental investigation
Restricted accessResearch articleFirst published online January, 2020
Interfacial delamination in glass-fiber/polymer-foam-core sandwich composites using singlemode–multimode–singlemode optical fiber sensors: Identification based on experimental investigation
Identification of interfacial delamination in the glass fiber/polymer-foam-core sandwich composites is difficult if the delamination does not propagate to the side surface of the specimen. However, these damages may eventually lead to compromising the sandwich composite structural component. A cost-effective novel embedded fiber optic sensor is being proposed in this manuscript, which works on the principle of multimode interference, to perform distributed sensing of interfacial delamination within the sandwich composites while in service. Even though this easy to use methodology has been used to identify interfacial delamination, this methodology can also be used for different other types of interfacial/interlaminar distributed strain sensing of samples under mechanical as well as thermal loads.
MitraN. A methodology for improving shear performance of marine grade sandwich composites: sandwich composite panel with shear key. Compos Struct2010; 92: 1065–1072.
2.
MitraNRajaBR. Improving delamination resistance capacity of sandwich composite columns with initial face/core debond. Compos B: Eng2012; 43: 1604–1612.
3.
PatraAMitraN. Interface fracture of sandwich composites: influence of MWCNT sonicated epoxy resin. Compos Sci Technol2014; 101: 94–101.
4.
PatraAKMitraN. Mixed-mode fracture of sandwich composites: performance improvement with multiwalled carbon nanotube sonicated resin. J Sandw Struct Mater2018; 20: 379–395.
5.
GholizadehS. A review of non-destructive testing methods of composite materials. Proc Struct Integrity2016; 1: 50–57.
6.
DawoodTAShenoiRASahinM. A procedure to embed fibre Bragg grating strain sensors into GFRP sandwich structures. Compos A: Appl Sci Manufact2007; 38: 217–226.
7.
MinakuchiSOkabeYTakedaN. Real-time detection of debonding between honeycomb core and facesheet using a small-diameter FBG sensor embedded in adhesive layer. J Sandw Struct Mater2007; 9: 9–33.
8.
Hackney D, Webb S and Peters K. Analysis of fiber Bragg grating spectral features for in-situ assessment of sandwich composites. In: ASME 2010 conference on smart materials, adaptive structures and intelligent systems, Philadelphia, Pennsylvania, USA, 28 September–1 October 2010, pp. 813–820. ISBN: 978-0-7918-4416-8. American Society of Mechanical Engineers.
9.
Farmand-AshtianiECugnoniJBotsisJ. Monitoring and characterization of the interfacial fracture in sandwich composites with embedded multiplexed optical sensors. Compos Struct2013; 96: 476–483.
10.
CanalLPSarfarazRViolakisG, et al.Monitoring strain gradients in adhesive composite joints by embedded fiber Bragg grating sensors. Compos Struct2014; 112: 241–247.
11.
Mitra N, Patra AK, Mondal S, et al. Real time detection of interfacial delamination crack propagation in polymer foam-cored sandwich composites using embedded fiber Bragg-grating sensor array with wavelength division multiplexing. Submitted to Journal of Sandwich structures and Materials on 18.9.2017 with manuscript ID is JSSM-17-0189 for probable publication.
12.
RiccioARaimondoAFragaleS, et al.Delamination buckling and growth phenomena in stiffened composite panels under compression. Part I: an experimental study. J Compos Mater2013; 48: 2843–2855.
13.
RiccioARaimondoADi CaprioF, et al.Delamination buckling and growth phenomena in stiffened composite panels under compression. Part II: a numerical study. J Compos Mater2014; 48: 2857–2870.
14.
RiccioADi CaprioFCamerlingoF, et al.Positioning of embedded optical fibres sensors for the monitoring of buckling in stiffened composite panels. Appl Compos Mater2013; 20: 73–86.
HattaAFarrellGWangQ, et al.Ratiometric wavelength monitor based on singlemode-multimode-singlemode fiber structure. Microwave Opt Technol Lett2008; 50: 3036–3039.
18.
LiEPengGD. Wavelength-encoded fiber-optic temperature sensor with ultra-high sensitivity. Opt Commun2008; 281: 5768–5770.
19.
HattaAMRajanGSemenovaY, et al.SMS fibre structure for temperature measurement using a simple intensity-based interrogation system. Electron Lett2009; 45: 1069–1071.
20.
LiE. Temperature compensation of multimode-interference-based fiber devices. Opt Lett2007; 32: 2064–2066.
21.
TripathiSMKumarAVarshneyRK, et al.Strain and temperature sensing characteristics of single-mode–multimode–single-mode structures. J Lightwave Technol2009; 27: 2348–2356.
22.
LiE. Sensitivity-enhanced fiber-optic strain sensor based on interference of higher order modes in circular fibers. IEEE Photonics Technol Lett2007; 19: 1266–1268.
23.
ZhouDPWeiLLiuWK, et al.Simultaneous measurement for strain and temperature using fiber Bragg gratings and multimode fibers. Appl Opt2008; 47: 1668–1672.
24.
SoldanoLBPenningsEC. Optical multi-mode interference devices based on self-imaging: principles and applications. J Lightwave Technol1995; 13: 615–627.
25.
ChangDCKuesterEF. A hybrid method for paraxial beam propagation in multimode optical waveguides. IEEE Trans Microwave Theor Tech1981; 29: 923–933.
26.
YamauchiJ. Propagating beam analysis of optical waveguides, Hertfordshire, UK: Research Studies Press, 2003.
27.
MohammedWSMehtaAJohnsonEG. Wavelength tunable fiber lens based on multimode interference. J Lightwave Technol2004; 22: 469–469.
28.
KumarAVarshneyRKSinyAC, et al.Transmission characteristics of SMS fiber optic sensor structures. Opt Commun2003; 219: 215–219.
29.
LaiMKaralekasDBotsisJ. On the effects of the lateral strains on the fiber Bragg grating response. Sensors2013; 13: 2631–2644.
30.
BertholdsADandlikerR. Determination of the individual strain-optic coefficients in single-mode optical fibres. J Lightwave Technol1988; 6: 17–20.
31.
Nguyen-XuanHNguyen-HoangSRabczukT, et al.A polytree-based adaptive approach to limit analysis of cracked structures. Comput Meth Appl Mech Eng2017; 313: 1006–1039.
32.
BazilevsYCaloVMCottrellJA, et al.Isogeometric analysis using T-splines. Comput Meth Appl Mech Eng2010; 199: 229–263.
