Skin Wrinkling of Impact Damaged Sandwich Composite

Abstract

The effect of impact damage on the edgewise compressive properties and failure mechanism of a sandwich polymer composite is investigated. The composite was made from a thick core of polyvinyl chloride foam sandwiched between thin face skins of glass fibre reinforced polymer laminate. This material was impacted at a low energy that caused damage to the skin and at a high energy that severely damaged the skin and core. The unimpacted sandwich composite failed in edgewise compression by crimping of the foam core. When damage created by the low and high energy impacts exceeded a critical size the failure mechanism changed suddenly to wrinkling of the impacted skin. Failure by skin wrinkling resulted in large reductions to the edgewise compressive stiffness and strength of the sandwich composite. A model is proposed to determine the edgewise compressive stress required to induce skin wrinkling in impact damaged sandwich composites. Good agreement was found between the theoretical and measured skin wrinkling stresses in some cases.

Keywords

sandwich composite impact damage edgewise compression skin wrinkling

Get full access to this article

View all access options for this article.

References

1. Karlsson, K. F. and B. T. Astrom . 1997. Composites, 28A:97-111.

2. Smith, C. S. 1990. Design of Marine Structures in Composite Materials, London: Elsevier Applied Science Ltd.

3. McClave, E. F. and M. J. Goodwin . 1992. "Development of a test program to evaluate structural defects in glass-reinforced plastic (GRP)," United States Coast Guard Report No. CG-D-02A-93, Vol. 1.

4. Thomson, R. S. , Z. Shah Khan and A. P. Mouritz . 1998. Composite Structures, 41:107-118.

5. Mouritz, A. P. and R. S. Thomson . 1999. Composite Structures, 44:263-278.

6. Mouritz, A. P. and R. S. Thomson . 1999. Proc. 2nd Australasian Congress on Applied Mechanics (ACAM99), 10-12 Feb 1999, Canberra, Paper R-091.

7. Hall, D. J. and B. L. Robson . 1984. Composites, 15:266-276.

8. Norris, C. B. et al. "Wrinkling of the facings of sandwich constructions subjected to edgewise compression," FPL Report 1810, Nov.1949.

9. Sullins, R. T. , Smith, G. W. and Spier, E. E. 1969. "Manual for structural stability analysis of sand-wich plates and shells," NASA Contractor Report, CR-1457, National Aeronautics and Space Administration, Washington, 1969-1969.

10.

10. Caprino, G. and R. Teti . 1989. Sandwich Structures Handbook, Padau: Il Prato.

11.

11. Standard test method for edgewise compressive strength of sandwich constructions, Annual Book of ASTM Standards, Vol. 15.03, American Society for Testing and Materials, PA, 1996, pp. 21-24.

12.

12. Mouritz, A. P. and L. K. Jain . 1997. Proc. 11th Int. Conf. Comp. Mat. (ICCM-I 1), 14-18 July 1997, Gold Coast, Australia, pp. V-116 to V-127.