The determination of the pressure–viscosity coefficient of a lubricant through an accurate film thickness formula and accurate film thickness measurements. Part 2: high L values
Restricted accessResearch articleFirst published online June, 2011
The determination of the pressure–viscosity coefficient of a lubricant through an accurate film thickness formula and accurate film thickness measurements. Part 2: high L values
The pressure–viscosity coefficient of a traction fluid is determined by fitting calculation results on accurate film thickness measurements, obtained at different speeds, loads, and temperatures. Through experiments, covering a range of 5.6 < M < 12 000, 2.1 < L < 17.5, film thickness values are calculated using a numerical method and approximation formulas from 12 models. It is concluded that, to assess the pressure–viscosity coefficient of the fluid, the Chittenden et al. approximation formula applied to circular contacts is the best choice, having an inaccuracy in between (−15%, +11%). This expression has been used far outside the regime of the numerical data where it was based upon.
van LeeuwenH.The determination of the pressure–viscosity coefficient of a lubricant through an accurate film thickness formula and accurate film thickness measurements. Proc. IMechE, Part J: J. Engineering Tribology, 2009, 212(J8), 1143–1163.
2.
ChittendenR. J.DowsonD.DunnJ. F.TaylorC. M.A theoretical analysis of the isothermal elastohydrodynamic lubrication of concentrated contacts, part I: direction of lubricant entrainment coincident with the major axis of the Hertzian contact ellipse. Proc. R. Soc. London, 1985, A 397(1813), 245–269.
3.
MoesH.Lubrication and beyond. In Lecture Notes, Code 115531, 2000 , 366.–366 (Twente University Press, Enschede, Netherlands).
4.
BairS.On the concentrated contact as a viscometer. Proc. IMechE, Part J: J. Engineering Tribology, 2000, 214(J6), 515–521.
5.
PensadoA. S.ComuñasM. J. P.FernándesJ.The pressure–viscosity coefficient of several ionic liquids. Tribol. Lett., 2008, 31(2), 107–118.
6.
BantchevG.BiresawG.Elastohydrodynamic study of vegetable oil–polyalphaolefin blends. Lubr. Sci., 2008, 20(4), 283–297.
7.
HamrockB. J.DowsonD.Isothermal elastohydrodynamic lubrication of point contacts. Part III – fully flooded results. Trans. ASME Series F, J. Lubr. Technol., 1977, 99(2), 264–276.
8.
Venner, C. H. Multilevel solution of the EHL line and point contact problems. PhD Dissertation, Twente University, Netherlands, 1991, 318 pp.
VennerC. H.LubrechtA. A.Multilevel methods in lubrication, 2000, Tribology Series no. 37 , 379–379 (Elsevier, Amsterdam).
11.
JohnstonG. J.WayteR.SpikesH. A.The measurement and study of very thin lubricant films in concentrated contacts. Tribol. Trans., 1991, 34(2), 187–194.
12.
ChaomleffelJ.-P.DalmazG.VergneP.Experimental results and analytical film thickness predictions in EHD rolling point contacts. Tribol. Int., 2007, 40(10–12, Special Issue), 1543–1552.
13.
HookeC. J.Minimum film thickness in lubricated point contacts operating in the elastic piezoviscous regime. Proc. IMechE, Part C: J. Mechanical Engineering Science, 1988, 202(C2), 73–84.
14.
Roelands, C. J. A. Correlational aspects of the viscosity-temperature-pressure relationship of lubricating oils. PhD Thesis, Delft University, V.R.B., Groningen, 1966, p. 495.
BairS.An experimental verification of the significance of the reciprocal asymptotic isoviscous pressure for EHD lubricants. Tribol. Trans., 1993, 36(2), 153–162.
17.
BairS.High pressure rheology for quantitative elastohydrodynamics, 2007, Tribology and Interface Engineering Series no. 54 , 240–240 (Elsevier, Amsterdam).
18.
EvansH. P.SnidleR. W.The isothermal elastohydrodynamic lubrication of spheres. Trans. ASME Series F, J. Lubr. Technol., 1981, 103(4), 547–557.
19.
HamrockB. J.SchmidS. R.JacobsonB.Fundamentals of fluid film lubrication, second edition, 2004 , 699–699 (Dekker, Basel).
20.
Archard, J. F., Cowking, E. W. Elastohydrodynamic lubrication at point contacts. Proc. Instn Mech. Engrs, 1965–1966, 180(Part 3B) 47–56. In Proceedings of the Symposium on Elastohydrodynamic lubrication, Leeds, September 1965, paper 3.
21.
SutcliffeM. P. F.Central film thickness in elliptical contacts. Proc. IMechE, Part C: J. Mechanical Engineering Science, 1989, 203, 387–392.
22.
GreenwoodJ. A.Film thicknesses in circular elastohydrodynamic contacts. Proc. IMechE, Part C: J. Mechanical Engineering Science, 1988, 202(C1), 11–17.
23.
VennerC. H.Software Code ehl2d0 version 1.00, 2008 (Twente University, The Netherlands).
24.
LubrechtA. A.VennerC. H.ColinF.Film thickness calculation in elasto-hydrodynamic lubricated fine and elliptical contacts: the Dowson, Higginson, Hamrock contribution Proc. IMechE, Part J: J. Engineering Tribology, 2009, 212(J3, Special Issue), 511–515.
25.
SharifK. J.Barragan de LingF.dM., MartinM. J.AlanouM. P.EvansH. P.SnidleR. W.Film thickness predictions for elastohydrodynamic elliptical contacts over a wide range of radius ratios with consideration of side starvation, Proc. IMechE, Part J: J. Engineering Tribology, 2000, 214(J1), 63–78.
26.
BairS.QureshiF.KotzalasM.The low-shear-stress rheology of a traction fluid and the influence on film thickness, Proc. IMechE, Part J: J. Engineering Tribology, 2004, 218(J2), 95–98.
27.
BairS.Shear thinning correction for rolling/sliding elastohydrodynamic film thickness. Proc. IMechE, Part J: J. Engineering Tribology, 2005, 219(J1), 69–74.
