Microstructural characterization of laser-irradiated bulk copper under dry sliding conditions

Abstract

The functionalization of surfaces for tribological applications is still a challenging task. There are numerous techniques for improving the friction and wear behaviour of metallic surfaces ranging from different coatings to textured surfaces. A promising approach for textured surfaces is the usage of laser interference patterning by a pulsed nanosecond Nd:YAG laser. Copper samples have been laser patterned using the laser interference metallurgy process. The resulting topographies were evaluated by white light interferometry and scanning electron microscopy in order to study the homogeneity of the structures at both macro- and micro-scales. Electron backscattering diffraction and transmission electron microscopy were performed in order to study the microstructural and oxide layer modifications induced by laser irradiation. Electron backscattering diffraction measurement did not show fine grains but a small proportion of misorientation due to the high quenching rate. Transmission electron microscopy did not allow to observe oxide layers. The friction and wear behaviour of bulk copper samples structured by laser interference metallurgy have been studied under dry sliding conditions using a tribometer in linear reciprocating sliding mode. Friction coefficient measurements revealed that patterned surfaces present a reduction in friction of up to 70% compared to untreated samples due to their good bearing properties and the reduction of the contact area.

Keywords

Copper laser friction coefficient dry sliding conditions

Get full access to this article

View all access options for this article.

References

Favret

Fuentes

. Functional properties of bio-inspired surfaces: characterization and technological applications. Hackensack: World Scientific Pub. Co. Inc., 2009.

Hollstein

Pfeiffer

Zeller

. Mechanical properties and wear behaviour of differently machined silicon nitride and silicon carbide ceramic surfaces. In: Ceramic materials and components for engines. Weinham, Germany: Wiley-VCH, 2007, pp. 157–161.

Willis

. Surface finish in relation to cylinder liners. Wear 1986; 109()(1–4): 351–366.

Pettersson

Jacobson

. Influence of surface texture on boundary lubricated sliding contacts. Tribol Int 2003; 36(11): 857–864.

Erdemir

. Review of engineered tribological interfaces for improved boundary lubrication. Tribol Int 2005; 38(3): 249–256.

Gachot

Leibenguth

Mücklich

. Tribological properties of laser interference induced microstructural architectures in metallic systems. In: Friction, wear and wear protection. Weinheim: Wiley, 2009, pp.59–66.

Gerbig

Dumitrua

Romanoa

. Effects of laser texturing on technical surfaces. In: Proceedings of the MRS fall meeting, Boston, MA, 2–6 December 2002, pp. 455–460.

Mücklich

Lasagni

Daniel

. Laser interference metallurgy - using interference as a tool for micro/nano structuring. Int J Mater Res 2006; 97(10): 1337–1344.

Hans

Gachot

Müller

. Direct laser interference structuring as a tool to gradually tune the wetting response of titanium and polyimide surfaces. Adv Eng Mater 2009; 11(10): 795–800.

10.

Gachot

Catrin

Lasagni

. Comparative study of grain sizes and orientation in microstructured Au, Pt and W thin films designed by laser interference metallurgy. Appl Surf Sci 2009; 255(10): 5626–5632.

11.

D'Alessandria

Lasagni

Mücklich

. Direct micro-patterning of aluminum substrates via laser interference metallurgy. Appl Surf Sci 2008; 255(5 Part 2): 3210–3216.

12.

Ziberi

Frost

Höche

. Ion-induced self-organized dot and ripple patterns on Si surfaces. Vacuum 2006; 81(2): 155–159.

13.

Lasagni

. Advanced design of periodical structures by laser interference metallurgy in the micro/nano scale on macroscopic areas. In: Materialwissenschaft und Werkstofftechnik. Aachen: Shaker Verlag, 2006.

14.

Daniel

Lasagni

Mücklich

. Stress and texture evolution of Ni/Al multi-film by laser interference irradiation. Surf Coat Technol 2004; 180: 478–482.

15.

D’Alessandria

Mücklich

. Tailoring the chemical behavior of aluminum for selective etching by laser interference metallurgy. Appl Phys A 98(2); 311–320.

16.

Bigerelle

Iost

. A numerical method to calculate the Abbott parameters: a wear application. Tribol Int 2007; 40(9): 1319–1334.

17.

Cabalin

Laserna

. Experimental determination of laser induced breakdown thresholds of metals under nanosecond Q-switched laser operation. Spectrochim Acta Part B 1998; 53(5): 723–730.

18.

Torrisi

Borrielli

Margarone

. Study on the ablation threshold induced by pulsed lasers at different wavelengths. Nucl Instrum Methods Phys Res Sect B 2007; 255(2): 373–379.

19.

Schwarz-Selinger

Cahill

Chen

. Micron-scale modifications of Si surface morphology by pulsed-laser texturing. Phys Rev B: Condens Matter 2001; 64(15): 155323–155323.

20.

Grigoropoulos

Moon

Lee

. Thermal transport in melting and recrystallization of amorphous and polycrystalline Si thin films. Appl Phys A 1999; 69(7): S295–S298.

21.

Aicheler

Sgobba

Arnau-Izquierdo

. Evolution of surface topography in dependence on the grain orientation during surface thermal fatigue of polycrystalline copper. Int J Fatigue 2011; 33(3): 396–402.

22.

Badji

Bacroix

Bouabdallah

. Texture, microstructure and anisotropic properties in annealed 2205 duplex stainless steel welds. Mater Charact 62(9); 833–843.

23.

Schreck

Zum Gahr

. Laser-assisted structuring of ceramic and steel surfaces for improving tribological properties. Appl Surf Sci 2005; 247(1–4): 616–622.

24.

Popov

. Kontakt zwischen rauen Oberflächen. In: Kontaktmechanik und Reibung. Heidelberg, Berlin: Springer, 2009, pp. 85–107.