An original formulation for tooth friction power losses in internal gears including the influence of tooth profile modifications is presented. For unmodified gears, the results agree well with the classic formulae in the literature thus validating the proposed approach. The contributions of profile modifications on internal gear efficiency are compared to that on external gears and the formulation is extended to planetary gears. Finally, the role of profile relief on planetary gear efficiency is pointed out and commented upon.
ChangenetCVelexP. A model for the prediction of churning losses in geared transmissions – preliminary results. J Mech Des2007; 129(1): 128–133.
2.
SeetharamanSKahramanA. Load-independent spin power losses of a spur gear pair: model formulation. J Tribol2009; 131: 11–11.
3.
LeprinceGChangenetCVilleF. Influence of aerated lubricants on gear churning losses – an engineering model. Tribol Trans2011; 54(6): 929–938.
4.
DiabYVilleFVelexP. Windage losses in high speed gears—preliminary experimental and theoretical results. J Mech Des2004; 126(5): 6–6.
5.
DawsonPH. Windage loss in larger high-speed gears. Proc IMechE Part A: J Power and Energy1984; 198(1): 51–59.
6.
DiabYVilleFHoujohH. Experimental and numerical investigations on the air-pumping phenomenon in high-speed spur and helical gears. Proc IMechE Part C: J Mechanical Engineering Science2005; 219(8): 785–800.
7.
TalbotDCKahramanASinghA. An experimental investigation of the efficiency of planetary gear sets. J Mech Des2012; 134(2): 7–7.
8.
BrittonRDElcoateCDAlanouMP. Effect of surface finish on gear tooth friction. J Tribol2000; 122(1): 354–360.
9.
AndersonNELoewenthalSHBlackJD. An analytical method to predict efficiency of aircraft gearboxes. NASA TM-83716, USAAVSCOM TR 84-C-81984.
10.
KrantzTL. Experimental and analytical evaluation of efficiency of helicopter planetary stage. NASA TP-3063, AVSCOM TR 90-C-0011990.
11.
RohnDAHandschuchRF. Efficiency testing of a helicopter transmission planetary reduction stage. NASA TM-2795, AVSCOM TR 87-C-281988.
MacmillanRH. Power flow and loss in differential mechanisms. J Mech Eng Sci1961; 3(1): 37–41.
14.
RadzimovskyEI. A simplified approach for determining power losses and efficiency of planetary gear drives. Mach Design1956; 9: 101–110.
15.
RadzimovskyEI. How to find efficiency, speed, and power in planetary gear drives. Mach Design1959; 11: 144–153.
16.
PennestriEFreudensteinF. The mechanical efficiency of epicyclic gear trains. J Mech Des1993; 115(3): 645–651.
17.
BuckinghamE. Analytical mechanics of gears, New York: Dover Publications, 1963, pp. 546–546.
18.
MerrittHE. Gear engineering, New York: Pitman, 1971, pp. 345–357.
19.
NiemannGWinterH. Mashinenelemete II, vol. 2, New York: Springer-Verlag, 1989.
20.
VelexPVilleF. An analytical approach to tooth friction losses in spur and helical gears—influence of profile modifications. J Mech Des2009; 131(10): 10–10.
21.
HenriotG. Traité théorique et pratique des engrenagesParis: Dunot, 19796th ed. 1324–1324.
22.
HarrisTA. Rolling bearing analysis, New York: Wiley-Interscience, 1991.
23.
Durand de GevigneyJChangenetCVilleF. Thermal modelling of a back to back gearbox test machine: application to the FZG test rig. Proc IMechE Part J: J Engineering Tribology2012; 226(6): 501–515.
