Tribological behaviour of induction hardened ISO 42CrMo4 low alloy steel was evaluated under unlubricated sliding conditions. The effect of hardening depth and test conditions on the friction and wear properties was investigated. The tribological tests were carried out on a reciprocating tribometer. Cylinder-on-flat contact configuration was adopted. The results showed that varying the hardened depth, normal load or sliding speed influences the friction coefficient, the friction energy, the wear volume and the wear coefficient. It was found, also, that a change in the wear behaviour occurs when a critical value of normal load is exceeded.
TotikYSadelerRAltunH. The effects of induction hardening on wear properties of AISI 4140 steel in dry sliding conditions. Mater Des2003; 24: 25–30.
2.
XuD-HKuangZ-B. A study on the distribution of residual stress due to surface induction hardening. J Eng Mater Tech (Trans ASME)1996; 118: 571–575.
3.
KristoffersenHVomackaP. Influence of process parameters for induction hardening on residual stresses. Mater Des2001; 22: 637–644.
4.
AhnSTKimDSNamWJ. Microstructural evolution and mechanical properties of low alloy steel tempered by induction heating. J Mater Process Technol2005; 160: 54–58.
5.
SertHCanAArikanH. Wear behavior of different surface treated cam spindles. Wear2006; 260: 1013–1019.
6.
SariNYYilmazM. Investigation of abrasive + erosive wear behaviour of surface hardening methods applied to AISI 1050 steel. Mater Des2006; 27: 470–478.
7.
AutayRKchaouMElleuchK. Tribological behaviour of carbon and low alloy steels: effect of mechanical properties and test conditions. Tribol Mater Surfaces Interfaces2011; 5: 133–140.
8.
AutayRKchaouMDammakF. Friction and wear behaviour of steels under different reciprocating sliding conditions. Tribol Trans2012; 55: 590–598.
9.
RamalhoAMirandaJC. The relationship between wear and dissipated energy in sliding systems. Wear2006; 260: 361–367.
10.
ArchardJF. Contact and rubbing of flat surfaces. J Appl Phys1953; 24: 981–988.
BreenDHWeneEM. Fatigue in machine structures (ground vehicles), fatigue and microstructures, Metals Park, OH: ASM, 1979, pp. 88–88.
13.
KimMHRheeKYPaikYN. Experimental investigation on the mechanical behaviour of high-frequency induction-hardened mild carbon, SPS5 steel. Mater Sci Eng A2008; 485: 31–38.
14.
PantazopoulosGPsyllakiPKanakisD. Tribological properties of a liquid nitrocarburised special purpose cold work tool steel. Surface Coat Technol2006; 200: 5889–5895.
15.
ViafaraCCCastroMIVelezJM. Unlubricated sliding wear of pearlitic and bainitic steels. Wear2005; 259: 405–411.
16.
KumarSBhattacharyyaAMondalDK. Dry sliding wear behaviour of medium carbon steel against an alumina disk. Wear2011; 270: 413–421.
17.
PodgornikBVizintinJLeskovsekV. Wear properties of induction hardened, conventional plasma nitrided and pulse plasma nitrided AISI 4140 steel in dry sliding conditions. Wear1999; 232: 231–242.
18.
ZandrahimiMReza BateniMPoladiA. The formation of martensite during wear of AISI 304 stainless steel. Wear2007; 263: 674–678.
19.
DasDDuttaAKRayKK. Correlation of microstructure with wear behaviour of deep cryogenically treated AISI D2 steel. Wear2009; 267: 1371–1380.
20.
RaiDSinghBSinghJ. Characterisation of wear behaviour of different microstructures in Ni–Cr–Mo–V steel. Wear2007; 263: 821–829.
21.
KanchanomaiCSaengwichianBManonukulA. Delamination wear of metal injection moulded 316L stainless steel. Wear2009; 267: 1665–1672.
22.
ShaeriMHSaghafianHShabestariSG. Effect of heat treatment on microstructure and mechanical properties of Cr–Mo steels (FMU-226) used in mills liner. Mater Des2012; 34: 192–200.
23.
AboueiVSaghafianHKheirandishSh. Effect of microstructure on the oxidative wear behaviour of plain carbon steel. Wear2007; 262: 1225–1231.
24.
BahramiAMousavi AnijdanSHGolozarMA. Effects of conventional heat treatment on wear resistance of AISI H13 tool steel. Wear2005; 258: 846–851.
25.
HardellJKassfeldtEPrakashB. Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800 ℃. Wear2008; 264: 788–799.
26.
BenselyAPrabhakaranAMohan LalD. Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment. Cryogenics2006; 45: 747–754.
27.
Spinler G. Conception des machines, Principes et applications, 1 statique. 2002, ch. 2, vol. 1, p.61.
