Generalized method for calculating the durability of sliding bearings with technological out-of-roundness of details

Abstract

This article presents the generalized cumulative model of wear kinetics for the sliding bearing elements in the case of single area and single-and-double area contact for different phases of rotating a shaft with a small contour ovality and a bushing with a circular contour. As a result of the performed numerical analysis, the regularities of the change in the initial maximum contact pressure due to shaft rotation and shaft changes due to wear are described, as well as the durability of the bearing and the linear wear of the bushing and shaft depending on the size of ovality are discussed in the work. The contact pressures are considerably higher in the zones of double-area contact than in the zones of single-area contact. The shaft ovality increases the bearing durability and reduces the hob wear. The results are presented graphically by means of charts.

Keywords

Sliding bearing details ovality cumulative wear model wear durability contact pressures

Get full access to this article

View all access options for this article.

References

Andreykiv

Chernets

. Assessment of the contact interaction of machine parts in friction, Kiev, Ukraine: Naukova Dumka, 1991.

Horyacheva

Dobychin

. Contact problems in tribology, Moscow: Mashinostroenie, 1988.

Kovalenko

. On the numerical analysis of wear of the shaft-bush coupling. Mekh Tverd Tela 1982; 6: 66–72.

Kragel’skii

Dobychin

Kombalov

. Foundations of the numerical analysis of friction and wear, Moscow: Mashinostroenie, 1977.

Kuz’menko

. Methods for the numerical analysis of wear and reliability, Podillya Technological University, Khmelnytskyi, 2002.

Teplyi

. Contact problems for zones with radial limits, Lvov, Ukraine: Wysshaya shkola, 1983.

Teplyi

. Evaluation of the contact parameters and wear in cylindrical sliding supports. Tren Iznos 1987; 6: 895–902.

Usov

. Internal contact of cylindrical solids with similar radiuses under their surface wear. Treniye i Iznos 1985; 3: 404–414.

Zwiezycki

. Reliability prediction of machine details under wear, Austria: Institute for Sustainable Technologies, ITE, Radom, 1999.

10.

Sorokatyy

. Generalization of triboelements method for the wear processes modeling of sliding bearings. Problems Tribol 2007; 2: 36–45.

11.

Sorokatyy

. Solving of wear and contact problems by triboelements method in ANSYS environment. Problems Tribol 2007; 3: 14–29.

12.

Kolmogorov

Kharlamov

Kurilov

. Friction and wear model for a heavily loaded sliding pair. Part II. Application to an unlubricated journal bearing. Wear 1996; 197: 9–16.

13.

Rezaei

Ost

Paepegem

. Experimental study and numerical simulation of the large-scale testing of polymeric composite journal bearings: two-dimensional modeling and validation. Tribol Lett 2009; 37: 12–12.

14.

Rezaei

Paepegem

Debates

. Adaptive finite element simulation of wear evolution in radial sliding bearings. Wear 2012; 296(1–2): 660–671.

15.

Chernets MV, Pashechko MI and Nevchas A. Methods for the prediction and elevation of the wear resistance of tribological sliding systems (in Ukrainian), 3 volumes. Іn: Investigation and numerical analysis of sliding tribosystems, methods for increasing their durability and wear resistance, vol. 1. Kolo: Drohobych, 2001, 492 pp.

16.

Chernets

. Methodology of evaluation of the characteristics of contact and prediction of the durability of cylindrical sliding tribosystems with small out-of-roundness of the contours. Problems Tribol 2000; 1: 14–22.

17.

Chernets

Lebedeva

. Assessment of wear and durability of plain bearings in the presence of ovality of the contours of their elements in the cumulative model. Problems Tribol 2005; 4: 114–120.

18.

Chernets

Andreykiv

Lebedeva

. A model for the evaluation of wear and durability of a plain bearing with small out-of-roundness. Mater Sci 2009; 2: 279–290.

19.

Chernets

. A contact problem for a cylindrical joint with technological faceting of the contours of its parts. Mater Sci 2009; 6: 859–868.

20.

Chernets

Zhidik

. Quasistatic contact problem for cylindrical joints with cutting of the contours of the bodies. Mater Sci 2011; 3: 294–300.