Pressure distribution for multi-lobe bearings using Fourier analysis

Abstract

During the past decades, researchers have focused a great deal of attention on the lobe bearings because of their superior stability. In this paper, a comprehensive methodology for determining the performances of bearings is developed based on the Fourier analysis. The advantage of this method is no longer to treat each lobe as an individual partial bearing like before, but to take into account the inherent relevance and coupling effects among lobes, etc. This article firstly puts forward universal frameworks of mathematical procedure, within which two multi-lobe journal bearings, namely, three- and four-lobe bearing are investigated. For the bearings with similar topology structure, the results show that the Fourier expansions of oil-film thickness are composed of the same family of harmonic basis functions. And those functions are merely related to the number of bearing lobes N. The results also show that both the oil-film profile and pressure field of the whole bearing completely inherit the periodicity from the periodic bearing structure and own the same period 2π/N commonly. Again, the simulated results construct the corresponding relationship between the expanded terms of oil-film thickness and pressure field. Further, quantitatively analyzing the variations of the pressure component indicates that as the order increases, the maximum of the pressure component decreases gradually. That provides a more convenient approach to obtain a satisfied prediction of the performance of the bearings just by using finite Fourier harmonic terms.

Keywords

Multi-lobe bearing topology structure Fourier analysis periodic harmonics relevance

Get full access to this article

View all access options for this article.

References

Biswas

Hikmat

Tiwari

. Transient analysis of 3-lobe bearings at 80 000 rpm for a gas turbine. IJMECH 2013; 2(1): 21–32.

Strzelecki

. Effect of lobe profile on the load capacity of 2-lobe journal bearing. Sci China Ser A 2001; 44: 95–100.

Rao

TVVLN

Biswas

Athre

. A methodology for dynamic coefficients and nonlinear response of multi-lobe journal bearings. Tribol Trans 2001; 44(1): 111–117.

Sharma

Phalle

Jain

. Combined influence of wear and misalignment of journal on the performance analysis of three-lobe three-pocket hybrid journal bearing compensated with capillary restrictor. J Tribol 2012; 134(1): 011703–011713.

Kushare

Sharma

. A study of two lobe non-recessed worn journal bearing operating with non-newtonian lubricant. Proc IMechE, Part J: J Engineering Tribology 2013; 227(12): 1418–1437.

Reynolds

. On the theory of lubrication and its application to Mr. Beauchamps Tower’s experiments, including an experimental determination of the viscosity of olive oil. Phil Trans Roy Soc 1889; 177: 157–234.

Sommerfeld

. Zur Hydrodynamischen Theorie der Schmiermittel-Reibung. Zeitschrift für Math Physik 1904; 40: 97–155.

Dubois GB and Ocvirk FW. Analytical derivation and experimental evaluation of short bearing approximations of full journal bearings. Report for National Advisory Committee for Aeronautics, Report no. 1157, 1953, NACA.

Pinkus

. Analysis and characteristics of three-lobe bearings. Trans ASME 1959; 81(1): 49–55.

10.

Lund JW and Thomson KK. A calculation method and data for the dynamic coefficients of oil lubricated journal bearings. In: Proceedings of the ASME design and engineering conference, New York, USA, 1978, pp.1–28. New York: ASME.

11.

Flack

Leader

Allaire

. An experimental and theoretical investigation of pressure in four lobe bearings. Wear 1980; 61(2): 233–242.

12.

Garner

Lee

Martin

. Stability of profile bore bearings: Influence of bearing type selection. Tribol Int 1980; 13(5): 204–210.

13.

Malik

Sinhasan

Chandra

. Design data for three-lobe bearings. Trans ASLE 1981; 24(3): 345–353.

14.

Malik

Chandra

Sinhasan

. Performance characteristics of tilted three-lobe journal bearing configurations. Tribol Int 1981; 14(6): 345–349.

15.

Sinhasan

Malik

Chandra

. A comparative study of some three-lobe bearing configurations. Wear 1981; 72(3): 277–286.

16.

Mehta

Rattan

. Performance of three-lobe pressure-dam bearings. Tribol Int 1993; 26(6): 435–442.

17.

Mehta

Rattan

Bhushan

. Static and dynamic characteristics of four-lobe pressure-dam bearings. Tribol Lett 2003; 15(4): 415–420.

18.

Batra

Bhushan

Mehta

. Effect of ellipticity ratio on the performance of an inverted three-lobe pressure dam bearing. Tribol Trans 2012; 55(6): 798–804.

19.

Bhushan

Rattan

Mehta

. Effect of L/D ratio on the performance of a four-lobe pressure dam bearing. IJASE 2007; 3(8): 420–424.

20.

Rahmatabadi

Rashidi Meybodi

Nekoeimehr

. Preload effects on the static performance of multi-lobe fixed profile journal bearings with micropolar. Proc IMechE, Part J: J Engineering Tribology 2011; 225(8): 718–730.

21.

Nicoleta MEne and Dimofte F. An analysis of cavitated wave journal bearings. In: STLE/ASME international joint tribology conference, San Antonio, USA, 22–25 October 2006, paper no. IJTC2006-12211, pp.455–462. New York: STLE/ASME.

22.

Sescu

Dimofte

. A study of the steady-state performance of a pressurized air wave bearing at concentric position. Tribol Trans 2009; 52(4): 544–552.

23.

Yang

. Numerical analysis on dynamic coefficients of self-acting gas-lubricated tilting-pad journal bearings. J Tribol 2008; 130(1): 011006–011016.

24.

Wang

Yang

Wang

. Nonlinear dynamic coefficients prediction of journal bearings using partial derivative method. Proc IMechE, Part J: J Engineering Tribology 2012; 226(4): 328–339.

25.

Ishiguro

. On the circle method of summation of a Cauchy product series. Proc Am Math Soc 1962; 13(5): 695–697.

26.

Haberman

. Applied partial differential equations: With Fourier series and boundary value problems, 4th ed. Beijing: China Machine Press, 2005, pp. 47–49.

27.

Zhi

. Method of undetermined function for finding special solution to Poisson equation (in Chinese). J Liaoning Inst Technol 2006; 26(1): 66–69.