Application of ultrasound technique to evaluate contact condition on the faying surface of riveted joints

Abstract

Contact area and pressure distributions on the faying surfaces of riveted joints are critical to fretting fatigue crack. However, these contact conditions are hard to evaluate by experimental methods. This study proposed an application of ultrasound technique to quantify contact area and pressure distribution on the faying surface of riveted joints. This ultrasound method consists of the ultrasonic reflection map measurement of the faying surface, and a parallel calibration procedure to establish the relationship between ultrasonic reflection and contact pressure. In this way, the contact area and pressure distributions of riveted joints installed with different riveting forces were investigated. The results show that the contact pressure increases rapidly with the squeeze force, while the contact area spreads slightly at the same time. The mean pressure profiles of the ultrasonic results were compared with the results of a finite element model for the riveted joints. The comparison shows that the mean pressure profiles are consistent with the numerical results.

Keywords

Ultrasound contact pressure distribution riveted joints faying surface fretting

Get full access to this article

View all access options for this article.

References

Brown

Straznicky

. Simulating fretting contact in single lap splices. Int J Fatigue 2009; 31: 375–384.

Fitzgerald

Cohen

. Residual stress in and around rivets in clad aluminum alloy plates. Mat Sci Eng A-Struct 1994; 188: 51–58.

Bakuckas JG and Carter A. Destructive evaluation and extended fatigue testing of retired aircraft fuselage structure: project update. In: The 7th Joint DoD/FAA/NASA conference on aging aircraft, New Orleans, Louisiana, 8–11 September 2003, pp.1–12.

Hills

. Mechanics of fretting fatigue. Wear 1994; 175: 107–113.

Iyer

Rubin

Hahn

. Influence of interference and clamping on fretting fatigue in single rivet-row lap joints. J Tribol 2001; 123: 686–698.

Rans

Strznicky

. Riveting process induces residual stresses around solid rivets in mechanical joints. J Aircraft 2007; 44: 323–329.

Liao

Shi

Xiong

. Analytical methodology for predicting fatigue life distribution of fuselage splices. Int J Fatigue 2001; 23: 177–185.

Szolwinski

Farris

. Linking riveting process parameters to the fatigue performance of riveted aircraft structures. J Aircraft 2000; 37: 130–137.

Manes

Giglio

Vigano

. Effect of riveting process parameters on the local stress field of a T-joint. Int J Mech Sci 2011; 53: 1039–1049.

10.

Shi

Bellinger

. Stress in triple-row riveted lap joints under the influence of specific factors. J Aircraft 2011; 48: 527–539.

11.

Marshall

Lewis

Dwyer-Joyce

. Characterisation of contact pressure distribution in bolted joints. Strain 2006; 42: 31–43.

12.

Dwyer-Joyce

Drinkwater

. In situ measurement of contact area and pressure distribution in machine elements. Tribol Lett 2003; 14: 41–52.

13.

Du F, Hong J, Li B, et al. A noise evaluation based Wiener deconvolution method for contact parameters measurement using ultrasound. In: ASME 2012 International Mechanical Engineering Congress and Exposition, Houston, USA, 9–15 November 2012, paper no. IMECE2012-86445, pp.671–676. New York: ASME.

14.

Hong

. An acoustic model for stiffness measurement of tribological interface using ultrasound. Tribol Int 2014; 73: 70–77.

15.

Pau

Aymerich

Ginesu

. Distribution of contact pressure in wheel-rail contact area. Wear 2002; 253: 265–274.

16.

Pau

Baldi

. Application of an ultrasonic technique to assess contact performance of bolted joints. J Pressure Vessel Technol 2007; 129: 175–185.

17.

Dwyer-Joyce RS and Drinkwater BW. Analysis of contact pressure using ultrasonic reflection. In: The 11th International Conference on Experimental Mechanics, Rotterdam, Netherlands, 1998, pp.747–754.

18.

Ciavarella

. Indentation by nominally flat or conical indenters with rounded corners. Int J Solids Struct 1999; 36: 4149–4181.

19.

Wronicz

Kaniowski

. Experimental and numerical study of strain progress during and after riveting process for brazier rivet and rivet with compensator-squeezing force and rivet type effect. Fatigue Aircraft Struct 2011; 1: 166–190.