Thermal elastohydrodynamic lubrication analysis for tilted and skewed rollers in cylindrical roller bearings

Abstract

Due to the imperfect geometry and misalignment, cylindrical roller loading may result in both the roller tilting and skewing. Roller tilting coupled with skewing is important for the working lifetime of the bearings. To investigate the effect of the roller tilting and skewing on the thermal elastohydrodynamic lubrication, a model with non-Newtonian property of the lubricant has been built and a complete numerical solution has been obtained to address the relationship between the tilted and skewed roller effect and the thermal effect. Effects of the tilting angle, the rotating speed, and the applied load are discussed. In addition, profiles of the roller ends and generatrix are modified to reduce the roller tilting coupled with the skewing effect. Results show that, the thermal effect and the uneven distribution of the lubricating performance are the most prominent when both tilting and skewing effect are considered. Larger tilting angle, and heavier applied load causes greater maximum pressure and temperature, and thinner minimum film. Higher rotating speed leads to greater maximum film temperature, although thicker film. Profile modification of the roller’s ends and generatrix may reduce the effect of roller tilting and skewing. These findings provide important insights into the lubricating design in rolling bearings.

Keywords

Effect of the roller tilting and skewing thermal elastohydrodynamic lubrication finite line contact cylindrical roller bearings profile modification non-Newtonian

Get full access to this article

View all access options for this article.

References

Harris

Kotzalas

. Rolling bearing analysis: Essential concepts of bearing technology, 5th ed. New York: Taylor & Francis Group, LLC, 2006.

Harris

Kotzalas

. Rolling bearing analysis: Advanced concepts of bearing technology, New York: Taylor & Francis Group, LLC, 2006.

Heydari

Gohar

. Pressure distribution on radially loaded rollers. Proc Instn Mech Engrs 1979; 21: 381–388.

Johns

Gohar

. Roller bearings under radial and eccentric loads. Tribol Int 1981; 13: 131–136.

Kushwaha

Rahnejat

Gohar

. Aligned and misaligned contacts of rollers to races in elastohydrodynamic finite line conjunctions. Proc IMechE, Part C: J Mechanical Engineering Science 2002; 216: 1051–1070.

Kushwaha

Rahnejat

. Transient concentrated finite line roller-to-race contact under combined entraining, tilting and squeeze film motions. J Phys D: Appl Phys 2004; 37: 2018–2034.

Fujiwara

Kawase

. Logarithmic profiles of rollers in roller bearings and optimization of the profiles. NTN Tech Rev 2007; 75: 140–148.

Liu

Yang

. Analysis of the lubricating mechanism for tilting rollers in rolling bearings. Proc IMechE, Part J: J Engineering Tribology 2011; 225: 1059–1070.

Liu

Yang

. On the thermal elastohydrodynamic lubrication of tilting roller pairs. Tribol Int 2013; 65: 346–353.

10.

Harris

Kotzalas

. On the causes and effects of roller skewing in cylindrical roller bearing. STLE Tribol Trans 1998; 41: 572–578.

11.

Yang

Danyluk

Hoeprich

. A study on rolling element skew measurement in a tapered roller bearing with a specialized capacitance probe. ASME J Tribol 2000; 122: 534–538.

12.

Osorno D. Rolling element skew measurement in a spherical roller bearing utilizing a CPD probe. Master’s Thesis, Georgia Institute of Technology, USA, 2005.

13.

Liu

Yang

. On the lubricating mechanism of roller skew in cylindrical roller bearings. STLE Tribol Trans 2013; 56: 929–942.

14.

Murch

Wilson

WRD

. A thermal elastohydrodynamic inlet zone analysis. Trans ASME, J Lubric Technol 1975; 97: 212−216–212−216.

15.

Greenwood

Kauzlarich

. Inlet shear heating in elastohydrodynamic lubrication. Trans ASME, J Lubric Technol 1973; 95: 212−216–212−216.

16.

Cameron

. Hydrodynamic lubrication of rotating disks in pure sliding, a new type of oil film formation. J Inst Petrol 1951; 37: 471−485–471−485.

17.

Yang

Wen

. A generalized Reynolds equation for non-Newtonian thermal elastohydrodynamic lubrication. ASME J Tribol 1990; 112: 631−636–631−636.

18.

Yang

Liu

. Effects of solid body temperature on the non-Newtonian thermal elastohydrodynamic lubrication behaviour in point contacts. Proc IMech E, Part J: J Engineering Tribology 2009; 223: 959−969–959−969.

19.

Roelands CJA. Correlation aspects of viscosity-temperature-pressure relationship of lubricating oils. PhD Thesis, Delft University of Technology, The Netherlands, 1966.

20.

Houpert

. New results of traction force calculations in elastohydrodynamic contacts. ASME J Tribol 1985; 107: 241−248–241−248.

21.

Dowson

Higginson

. Elastohydrodynamic lubrication, Oxford: Pergamon Press, 1977.

22.

Venner CH. Multilevel solution of the EHL line and point contact problems. PHD Thesis, University of Twente, Enschede, The Netherlands, 1991.

23.

Brandt

Lubrecht

. Multilevel matrix multiplication and fast solution of integral equations. J Comput Phys 1990; 90: 348–370.

24.

Liu

Yang

. Analysis of the thermal elastohydrodynamic lubrication of a finite line contact. Tribol Int 2002; 35: 137–144.

25.

Wang

Yang

. Simplified multigrid technique for the numerical solution to the steady-state and transient EHL line contacts and the arbitrary entrainment EHL point contacts. Tribol Int 2001; 34: 191–202.

26.

Mostofi

Gohar

. Elastohydrodynamic lubrication of finite line contacts. Trans ASME J Lubric Technol 1983; 105: 598–604.