A mathematical model for accurately calculating heat generation rate in a grease-lubricated spherical roller bearing (SRB) is established in this paper by adopting the local heat source analysis approach, which involves in calculating heat generation rates of roller–raceway contact, cage and inner ring land contact, roller and cage pocket contact, and power loss of roller churning. Numerical calculating results show that the total heat generation rate of SRB increases as the inner ring rotating speed and radial load increase. The heat generated by roller–raceway contact is the dominant part in the total heat generation rate of the SRB. Some SRB geometrical parameters, such as diametral clearance and roller–raceway osculation, also have some effect on SRB heat generation rate.
CousseauTGraçaBMCamposAV. Influence of grease rheology on thrust ball bearings friction torque. Tribol Int2012; 46: 106–113.
3.
PoulyFChangenetCVilleF. Investigations on the power losses and thermal behavior of rolling element bearings. Proc IMechE, Part J: J Engineering Tribology2010; 224: 925–933.
4.
NeurouthAChangenetCVilleF. Thermal modeling of a grease lubricated thrust ball bearing. Proc IMechE, Part J: J Engineering Tribology2014; 228: 1266–1275.
5.
KannelJWBarberSA. Estimate of surface temperatures during rolling contact. Tribol Trans1989; 32: 305–310.
6.
FlourosM. Correlations for heat generation and outer ring temperature of high speed and highly loaded ball bearings in an aero-engine. Aerosp Sci Technol2006; 10: 611–617.
7.
XuMJiangSYCaiY. An improved thermal model for machine tool bearings. Int J Mach Tools Manuf2007; 47: 52–62.
8.
TarawnehCMColeKDWilsonBM. Experiments and models for the thermal response of railroad tapered-roller bearings. Int J Heat Mass Transfer2008; 51: 5794–5803.
9.
JinCWuBHuYM. Heat generation modeling of ball bearing based on internal load distribution. Tribol Int2012; 45: 8–15.
10.
TakabiJKhonsariMM. Experimental testing and thermal analysis of ball bearings. Tribol Int2013; 60: 93–103.
11.
FernandesCMMartinsRCSeabraJH. Friction torque of thrust ball bearings lubricated with wind turbine gear oils. Tribol Int2013; 58: 47–54.
12.
BabuSManisekarK. Experimental study of heat distribution in polished bearing surfaces for design and development of large diameter slewing ring bearing for FBR. Procedia Eng2014; 86: 350–358.
13.
ServaisCBozetJLKreitP. Experimental validation of a thermal model of a Lox flooded ball bearing. Tribol Int2014; 80: 71–75.
14.
FernandesCMCGMarquesPMTMartinsRC. Gearbox power loss. Part I: Losses in rolling bearings. Tribol Int2015; 88: 298–308.
15.
PalaciosJMPalaciosMP. Rheological properties of greases in EHD contacts. Tribol Int1984; 17: 167–171.
16.
DengS’EJiaQYXieJX. Design principles of rolling element bearings, 1st ed. Beijing: Standards Press of China, 2014, pp. 52–52.
17.
HarrisTAKotzalasMN. Rolling bearing analysis: Essential concepts of bearing technology, 5th ed. New York: Taylor and Francis Group, 2006.
18.
GhalamchiBSopanenJMikkolaA. Simple and versatile dynamic model of spherical roller bearing. Int J Rotat Mach2013; 2013: 1–13.
19.
HoupertL. An engineering approach to Hertzian contact elasticity—part I. J Tribol2001; 123: 582–588.
20.
LuoJWLuoTY. Analysis, calculation and application of rolling element bearings, 1st ed. Beijing: China Machine Press, 2009, pp. 59–59.
21.
HarrisTAKotzalasMN. Rolling bearing analysis: Advanced concepts of bearing technology, 5th ed. New York: Taylor and Francis Group, 2006.
22.
HamrockBJDowsonD. Ball bearing lubrication, 1st ed. New York: John Wiley & Sons Inc, 1981.
WenSZHuangP. Principles of tribology, 3rd ed. Beijing: Tsinghua University Press, 2008, pp. 7–7.
25.
Wang JW. Study on the lubricating properties and mechanism of oil-air lubrication using in rolling bearings. PhD Thesis, East China University of Science and Technology, China, 2008.
26.
WangLQ. Design and numerical analysis of rolling element bearing for extreme applications, 1st ed. Harbin: Harbin Institute of Technology Press, 2013, pp. 240–240.
