Surfactants are important molecules to decide the lubricating characteristics in aqueous lubrication. In metal working fluids, stabilization of oil droplets in continuous water phase is aided by repulsive force created by surfactants at oil−water interface. Present study explores the possibility of participation of surfactants molecules in lubrication process. Effect of surfactant hydrocarbon chain length and type of head group in aqueous lubrication is explored. Aqueous solutions were prepared using Oleic acid, Tween 20 and Tween 80 surfactants. Goniometer was used for recording surface and interfacial effects of surfactants in water and on steel substrate. Lubricating response of aqueous solutions of surfactants was recorded using Tribometer. Ability of a surfactant to adsorb the steel surface along with longer hydrocarbon chain length is well suited for aqueous lubrication. Solubility of surfactant in water is another important parameter.
BenitoJMCambiellaALoboA. Formulation, characterization and treatment of metalworking oil-in-water emulsions. Clean Technol Environ Policy2010; 12: 31–41.
7.
JoynerHSPernellCWDaubertCR. Impact of oil-in-water emulsion composition and preparation method on emulsion physical properties and friction behaviors. Tribol Lett2014; 56: 143–160.
GellmanAJSpencerND. Surface chemistry in tribology. Proc IMechE Part J J Eng Tribol2002; 216: 443–461.
10.
GreshamBRM. The mysterious world of MWF additives. Tribol Lubr Technol2006; 62(9): 30–32.
11.
Kawasaki H. Water-soluble metalworking fluid and coolant for metalworking. 2015, US 8969270B2.
12.
CambiellaÁBenitoJMPazosC. Interfacial properties of oil-in-water emulsions designed to be used as metalworking fluids. Colloids Surf A Physicochem Eng Asp2007; 305: 112–119.
13.
VakarelskiIUBrownSCRabinovichYI. Lateral force microscopy investigation of surfactant-mediated lubrication from aqueous solution. Langmuir2004; 20: 1724–1731.
14.
BoydeS. Green lubricants. Environmental benefits and impacts of lubrication. Green Chem2002; 4: 293–307.
15.
IssakaSA. Review on the fundamental aspects of petroleum oil emulsions and techniques of demulsification. J Pet Environ Biotechnol2015; 6: 1–15.
16.
SmitBSchlijperAGRupertLAM. Effects of chain length of surfactants on the interfacial tension: molecular dynamics simulations and experiments. J Phys Chem1990; 94: 6933–6935.
17.
KonopAJColbyRH. Role of condensed counterions in the thermodynamics of surfactant micelle formation with and without oppositely charged polyelectrolytes. Langmuir1999; 15: 58–65.
18.
KanagalasaraVSaxenaDBiswasSK. Effect of interfacial microstructure of adsorbed poly (ethylene glycol) monooleate on steel substrate on sliding friction in oil in water emulsion. J Phys Chem C2012; 116: 20830–20838.
19.
SuryanarayanaGGhoshP. Adsorption and coalescence in mixed-surfactant systems: air-water interface. Ind Eng Chem Res2010; 49: 1711–1724.
20.
MalikMAHashimMANabiF. Anti-corrosion ability of surfactants: a review. Int J Electrochem Sci2011; 6: 1927–1948.
21.
CambiellaÁBenitoJMPazosC. Interfacial properties of oil-in-water emulsions designed to be used as metalworking fluids. Colloids Surf A Physicochem Eng Asp2007; 305: 112–119.
22.
NosonovskyMBhushanB. Green tribology: principles, research areas and challenges. Philos Trans A Math Phys Eng Sci2010; 368: 4677–4694.
23.
PatilHHSangliD. Tribological properties of Sio 2 nanoparticles added In SN-500 base oil. Int J Eng Res Tech2013; 2: 763–768.
24.
TzanakisIHadfieldMThomasB. Future perspectives on sustainable tribology. Renew Sustain Energy Rev2012; 16: 4126–4140.
25.
LovellMRKabirMAMenezesPL. Influence of boric acid additive size on green lubricant performance. Philos Trans A Math Phys Eng Sci2010; 368: 4851–4868.
26.
KumarDDanielJBiswasSK. Tribology of steel/steel interaction in oil-in-water emulsion: a rationale for lubricity. J Colloid Interface Sci2010; 345: 307–315.
27.
WhiteCTMintmireJW. The future of metalworking fluids additives. STLE2015; 71(3): 36–45.
28.
YanJZengXRenT. Boundary lubrication of stainless steel and CoCrMo alloy materials based on three ester-based additives. Tribol Int2014; 73: 88–94.
29.
Jimenez AE, Bermudez MD, Iglesias P, et al. Neat ionic liquids and additives in lubrication of steel-aluminum. In: Proceedings of the world tribology congress III WTC, 2005.
ZhaoFClarensAMurphreeA. Structural aspects of surfactant selection for the design of vegetable oil semi-synthetic metalworking fluids. Environ Sci Technol2006; 40: 7930–7937.
32.
RebolledaSSanzMTBenitoJM. Formulation and characterisation of wheat bran oil-in-water nanoemulsions. Food Chem2015; 167: 16–23.
33.
Tween 80, MSDS No. 8074, CAS No: 9005-65-6, Sigma-Aldrich, 3050 Spruce Street, Missouri, USA.
34.
FengJZengYMaC. The surfactant tween 80 enhances biodesulfurization. Appl Environ Microbiol2006; 72: 7390–7393.
35.
MahmoodMEAl-koofeeDAF. Effect of temperature changes on critical micelle concentration for tween series surfactant. Glob J Sci Front Res Chem2013; 13: 1–7.
36.
De GennesPGTaupinC. Microemulsions and the flexibility of oil/water interfaces. J Phys Chem1982; 86: 2294–2304.
37.
FarnRJ. Chemistry and technology of surfactants, UK: Blackwell Publishing Ltd, 2008.
38.
KumarDBiswasSK. Microscopic frictional response of sodium oleate self-assembled on steel. Tribol Lett2008; 30: 199–204.
39.
KumarDBiswasSK. Effect of surfactant dispersed in oil on interaction force between an oil film and a steel substrate in water. Colloids Surf A Physicochem Eng Asp2011; 377: 195–204.
40.
KumarDDanielJBiswasSK. Tribology of steel/steel interaction in oil-in-water emulsion; a rationale for lubricity. J Colloid Interface Sci2010; 345: 307–307.
41.
BuckleyCH. Surface effects in adhesion, friction, wear and lubrication, Amsterdam: Elsevier Scientific Publishing Company, 1981.
42.
MartinJMMattaCBouchetM-IDB. Mechanism of friction reduction of unsaturated fatty acids as additives in diesel fuels. Friction2013; 1: 252–258.
