Study on characteristics and mathematical models of stress relaxation for metal O-rings

Abstract

The metal O-ring is effectively applied to extreme conditions and long-term uses for several decades, where conventional seals cannot meet the requirements. During the long-time service, the stress relaxation of the metal O-ring has been confirmed to be a potential damage to the sealing performance. By analyzing the sealing mechanism and the problem of the stress relaxation of the metal O-ring, a model has been developed to study its stress relaxation. The model includes the contact model, the stress–strain model, and the dynamic equation of stress relaxation. Based on the classical elastic-plastic model for two contact rough surfaces, the contact model of sealing zone is developed, by which the mechanical and geometric parameters of the sealing zone can be obtained for the initial state after the assembling. In the stress–strain model, the determination of stress and strain in the metal O-ring is performed by means of a simplified closed-form solution. The dynamic equation of stress relaxation using the stress-creep rate equation is developed, and is solved by combination of the contact model and the stress–strain model. The equation can be adopted for stress relaxation analysis of the metal O-ring at any time. After a validation of the model by comparison with experiments, a parametric study is presented. Simulation results corresponding with the mathematical models explain how the stress relaxation characteristic of the metal O-ring is influenced by a number of parameters.

Keywords

Metal O-ring stress relaxation contact stress sealing load dynamic equation

Get full access to this article

View all access options for this article.

References

Zhang

Shou

ZHD

. Seal gasket and sheet packing, 3rd ed. Beijing: Mechanical Industry Press, 1994, pp. 76–76.

Wen

BCH

. Handbook of mechanical design, 16th ed. Beijing: Mechanical Industry Press, 2015, pp. 389–389.

Ali

Basil

Sayed

. A proposed model for creep relaxation of soft gaskets in bolted joints at room. J Press Vess Technol 2008; 130: 011211-1-011211-6–011211-1-011211-6.

Basil

Ali

Sayed

. A proposed model for predicting clamp load loss due to gasket creep relaxation in bolted joints. J Press Vess Technol 2012; 134: 021201-1-021201-5–021201-1-021201-5.

Sayed

Ali

. Clamp load loss due to elastic interaction and gasket creep relaxation in bolted joints. J Press Vess Technol 2006; 128: 394–401.

Abboud

Nassar

. Viscoelastic strain hardening model for gasket creep relaxation. J Press Vess Technol 2013; 135: 031201-1-031201-9–031201-1-031201-9.

Sun

. Prediction of time-correlated leakage rates of bolted flanged connections by considering the maximum gasket contact stress. J Press Vess Technol 2012; 134: 011211-1–011211-7–011211-1–011211-7.

Mao

Wang

WZH

Liu

YZH

. Comparative study of flange-to-seal contact couplings with bolt relaxation under creep condition. J Eng Gas Turbines Power 2014; 136: 072504-1–072504-8–072504-1–072504-8.

More GD and Datta A. Ultra high temperature resilient metallic seal development for aero propulsion and gas turbine applications. In: 39th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit, Huntsville, AL, USA, 20–23 July 2003, paper no. AIAA 2003-4835, pp.1–7. New York: AIAA.

10.

Newman J and Payne J. Novel ultra-high temperature metal seal with single crystal spring energizer. In: 45th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit, Denver, CO, USA, 2–5 August 2009, paper no. AIAA 2009-5169, pp.1–8. New York: AIAA.

11.

Sassoulas

Morice

Caplain

. Ageing of metallic gaskets for spent fuel casks: century-long life forecast from 25,000-h-long experiments. Nucl Eng Des 2006; 236: 2411–2417.

12.

Chen

You

LCH

Shi

. Characteristic study of stress relaxation on V-type metallic spiral wound gasket. Lubric Seal 2003; 2: 54–55.

13.

Wang

Yan

. Effect of stress relaxation on the leak rate of the orbicular seal joint. Spacecraft Environ Eng 2009; 26: 455–457.

14.

Liao

CHJ

Wang

. Features and applications of typical non-conventional type metal seals. Cryogenics 2014; 4: 55–60.

15.

Halling

. Principles of tribology, 5th ed. London: McMillan Press Ltd, 1975, pp. 121–121.

16.

Wen

SZH

Huang

. Principles of tribology, 8th ed. Beijing: Tsinghua University Press, 2008, pp. 223–223.

17.

Valetin

. Physical principles and application of contact mechanics and friction, 3rd ed. Beijing: Tsinghua University Press, 2011, pp. 56–56.

18.

Greenwood

Williamson

. Contact of nominally flat surface. Proc Roy Soc A 1966; 295: 300–319.

19.

Yiannopoulos

ACH

. A simplified solution for stresses in thick-wall cylinders for various loading conditions. Comput Struct 1996; 60: 571–578.

20.

Liu

Zhang

. Basic theory of elasticity and plasticity, 6th ed. Wuhan: Huazhong University of Science and Technology Press, 2008, pp. 189–189.