Transient and steady state behaviour of elasto–aerodynamic air foil bearings,considering bump foil compliance and top foil inertia and flexibility: A numerical investigation
Restricted accessResearch articleFirst published online October, 2017
Transient and steady state behaviour of elasto–aerodynamic air foil bearings,considering bump foil compliance and top foil inertia and flexibility: A numerical investigation
This work gives a theoretical contribution to the problem of modelling air foil bearings considering large sagging effects in the calculation of the non-linear transient and steady state response of a rigid rotor. This paper consists of two parts: the development of a miltiphysics model of the air foil bearing, and a numerical parameter study of a rigid journal supported in an air foil bearing with a partially supported top foil. The mathematical model of the air foil bearing is centred around the finite element models of both the air film and the top foil structure. These finite element models utilise two types of eight-node isoparametric elements. The rotor is modelled as a rigid body without rotational inertia, i.e. as a journal. The bump foil is included via a bilinear version of the simple elastic foundation model. This paper introduces the bilinear simple elastic foundation model, which combined with the top foil structure model, enables a separation of the top foil and the bump foil. A phenomenon associated within areas of the top foil is where the aerodynamic pressure is sub-ambient. The parameter study investigates the performance of three air foil bearings with partially supported top foils and one air foil bearing with a fully supported top foil. The steady state responses of a journal supported by these air foil bearings are investigated for varied rotational speeds and journal unbalances as well as the top foil sagging in the unsupported area. The study reveals that sub-harmonic vibrations associated with a large journal unbalance can be eliminated by a proper design layout of the bump foil, i.e. placement of the unsupported area. The positive effect is attributed to ‘equivalent shallow pockets’ formed by the sagging top foil.
Agrawal GL. Foil air/gas bearing technology – an overview. In: International gas turbine & aeroengine congress & exhibition. Orlando, FL, 2–5 June 1997, ASME-97-GT-347, pp.1–11.
2.
Heshmat H. A feasibility study on the use of foil bearings in cryogenic turbopumps. In: AIAA/SAE/ASME/ASEE 27th joint propulsion conference, Sacramento, CA, 24–26 June 1991, AIAA-91-2103, pp.1–12.
3.
LarsenJSHansenAJTSantosIF. Experimental and theoretical analysis of a rigid rotor supported by air foil bearings. Mechanics & Industry2014; 16(1): 106–118.
4.
San AndrésLRohmerMParkS. Failure of a test rig operating with pressurized gas bearings: A lesson on humility. Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, 15–19 June 2015, ASME-GT2015-42556Montréal: ASME, pp. 10–10.
5.
WalowitJAAnnoJN. Modern developments in lubrication mechanics, London: Applied Science Publishers, 1975.
6.
HeshmatHShapiroWGrayS. Development of foil journal bearings for high load capacity and high speed whirl stability. J Lubric Tech1982; 104(2): 149–156.
RubioDSan AndrésL. Bump-type foil bearing structural stiffness: Experiments and predictions. J Eng Gas Turb Power2006; 128(3): 653–660–653–660.
13.
Balducchi F, Arghir M and Gaudillere S. Experimental analysis of the unbalance response of rigid rotors supported on aerodynamic foil bearings. In: Proceedings of ASME turbo expo 2014, 16–20 June 2014, ASME-GT2014-25552. Düsseldorf, Germany: ASME.
14.
LarsenJSVarelaACSantosIF. Numerical and experimental investigation of bump foil mechanical behaviour. Tribol Int2014; 74: 46–56.
15.
KimTHLeeJKimYM. Static structural characterization of multilayer gas foil journal bearings. In: Proceedings of ASME Turbo Expo 2015: Turbine Technical Conference and Exposition, 15–19 June 2015 ASME-GT2015-43959Montréal: ASME.
16.
Le LezSArghirMFrêneJ. Nonlinear numerical prediction of gas foil bearing stability and unbalanced response. J Eng Gas Turb Power2009; 131(1): 01253-1–12–01253-1–12.
17.
San AndrésLRubioDKimTH. Rotordynamic performance of a rotor supported on bump type foil gas bearings: Experiments and predictions. J Eng Gas Turb Power2007; 129(3): 850–857.
18.
ArghirMLe LezSFreneJ. Finite-volume solution of the compressible Reynolds equation: Linear and non-linear analysis of gas bearings. Proc Inst Mech Eng J J Eng Tribol2006; 220(7): 617–627.
19.
Pham HM and Bonello P. Efficient techniques for the computation of the nonlinear dynamics of a foil–air bearing rotor system. In: Proceedings of ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, 3–7 June 2013, San Antonio, Texas, USA ASME-GT2013-94389.
20.
BonelloPPhamHM. The efficient computation of the nonlinear dynamic response of a foil air bearing rotor system. J Sound Vib2014; 333(15): 3459–3478.
21.
BonelloPPhamHM. Nonlinear dynamic analysis of high speed oil–free turbomachinery with focus on stability and self–excited vibration. J Tribol2014; 136: 041705-1–10–041705-1–10.
22.
LarsenJSSantosIF. On the nonlinear steady–state response of rigid rotors supported by air foil bearings – theory and experiments. J Sound Vib2015; 346: 284–297.
23.
CarpinoMTalmageG. A fully coupled finite element formulation for elastically supported foil journal bearings. Tribol T2003; 46(4): 560–565.
24.
San AndrésLKimTH. Improvements to the analysis of gas foil bearings: Integration of top foil 1D and 2D structural models. In: ASME turbo expo 2007: Power for land, sea and air, ASME-GT2007-27249, 14–17 May 2007, pp. 779–789.
25.
San AndrésLKimTH. Analysis of gas foil bearings integrating FE top foil models. Tribol Int2009; 42(1): 111–120.
Xu F, Liu Z, Zhang G, et al. Hydrodynamic analysis of compliant foil bearings with modified top foil model. In: Proceedings of ASME turbo expo 2011, Vancouver, British Columbia, Canada, 6–10 June 2011, ASME-GT2011-46018, pp.1–10.
28.
XuFLiuZZhangGet al.Effects of shear stiffness in top foil structure on gas foil bearing performance based on thick plate theory. Proc Inst Mech Eng J J Eng Tribol2013; 227(7): 761–776.
29.
LarsenJSSantosIF. Efficient solution of the non-linear Reynolds equation for compressible fluid using the finite element method. J Braz Soc Mech Sci2014; 37. DOI: 10.1007/s40430-014-0220-5.
30.
SongJHKimD. Foil gas bearing with compression springs: Analyses and experiments. J Tribol2007; 129(3): 628–639.
31.
YuHShuangtaoCRugangCet al.Numerical study on foil journal bearings with protuberant foil structure. Tribol Int2011; 44(9): 1061–1070.
32.
San AndrésLChirathadamTA. Performance characteristics of metal mesh foil bearings: Predictions versus measurements. J Eng Gas Turb Power2013; 135(12): 122503-1–8–122503-1–8.
33.
ChenSHouYNiuLet al.Study on double–layer protuberant gas foil journal bearings with different foil layers arrangement. J Adv Mech Des Syst2015; 9(2): 1–12.
34.
KimD. Parametric studies on static and dynamic performance of air foil bearings with different top foil geometries and bump stiffness distributions. J Tribol2007; 129(2): 354–364.
35.
KimTHSan AndrésL. Effects of a mechanical preload on the dynamic force response of gas foil bearings: Measurements and model predictions. Tribol Trans2009; 52(4): 569–580.
36.
San AndrésLNorsworthyJ. Structural and rotordynamic force coefficients of a shimmed bump foil bearing: An assessment of a simple engineering practice. J Eng Gas Turb Power2015; 138(1): 012505-1–8–012505-1–8.
37.
PandaSNatarajanR. Analysis of laminated composite shell structures by finite element method. Comput Struct1981; 14(3–4): 225–230.
38.
Larsen JS, Nielsen BB and Santos IF. On the numerical simulation of nonlinear transient behavior of compliant air foil bearings. In: SIRM 2015 – 11th international conference on vibrations in rotating machines, Magdeburg, Germany, 23–25 February 2015, Paper-ID 39, pp.1–12.
39.
CookRDMalkusDSPleshaMEet al.Concepts and applications of finite element analysis, 4th ed. Hoboken, New Jersey: John Wiley & Sons. Inc., 2002.
40.
HarrisonWJ. The hydrodynamical theory of lubrication with special reference to air as a lubricant. Transactions Cambridge Philosophical Society1913; 22: 34–54.
41.
HeshmatHWalowitJAPinkusO. Analysis of gas lubricated compliant thrust bearings. J Lubric Tech1983; 105: 638–646.
42.
InmanDJ. Engineering vibration, 2nd ed. Upper Saddle River, New Jersey: Prentice–Hall, Inc., 2001.
43.
PowellJW. A review of progress in gas lubrication. Reviews of Physics in Technology1970; 1(2): 96–129.
